close
  • Follow us
CATEGORIESILT CODENAMESUMMARYSELECT
ILT-U-2059 Disc brake pad determinations

Description: VISUAL TEST & INSPECTION: Identification of defects by Physical examination and other simple tests like sound test, tap test, optical test. Method: IEC 22574

ILT-U-17222D dimensional analysis.

Description: Measurement of a sample in a 2D microscope, Method:

ILT-U-525Abrasion Resistance of Organic Coatings by the Taber Abraser

Description: Method: ASTM D4060

ILT-U-2000Abrasion resistance of soles determination

Description: Abrasion resistance Method: ISO 4649

ILT-U-442Abrasion Resistance of Textile Fabrics

Description: Martindale Abrasion Tester Method Method: ASTM D4966

ILT-U-637Abrasion test in Textile

Description: Martindale method Method: EN 13520

ILT-U-595Absorbency of Textiles

Description: Method: AATCC 79

ILT-U-1992Acetaminophen and Risperidone tablets.

Description: Dissolution test (U.V.), and Dissolution test (HPLC) Method:

ILT-U-1443Acid digestion process by microwave in CO2

Description: Acid digestion process by microwave in CO2 (Solutions: Ag, As, Ba, Be, Cd, Ni, Pb, Se, Tl and V) Method: NOM-147-SEMARNAT

ILT-U-417Acid soluble chlorides and acid soluble sulfates for aggregate and concrete testing

Description: Acid soluble chlorides, Acid soluble sulfates, stone sample. Acid soluble chlorides, Acid soluble sulfates concrete sample. Method: BS 812, BS 1881

ILT-U-417Acid soluble chlorides and acid soluble sulfates for aggregate and concrete testing. CM

Description: Acid soluble chlorides, Acid soluble sulfates, stone sample. Acid soluble chlorides, Acid soluble sulfates concrete sample. Method: BS 812, BS 1881

ILT-U-1499Acidity and others determinations on distillates

Description: hydrocyanic acid; Ethyl acetate; Volatile acids; Fixed acidity; Total aldehydes; Total acidity; Total sugars; Volatile acidity; and Higher alcohols Method:

ILT-U-2166Acoustic determinations. 1A

Description: Evaluation of the sound pressure level emitted Method: ISO 11201

ILT-U-2165Acoustic determinations. 1B

Description: Evaluation of the power level emitted Method: ISO 3744

ILT-U-2202Acoustic Emission Test – NDT

Description: Defect measurement, according to Acoustic Emission test Method: EN 13554

ILT-U-263Acoustic test toys

Description: NM 300-1: 2003; EN71-1:2011 / UNE-EN71-1:2012; ASTM F963-11 Method: NM 300-1, EN 71-1, ASTM F963

ILT-U-1964Acoustic testing class

Description: Acoustic testing class, in the NOISE SEAL test. Portaria n.º 430, de 16 de agosto de 2012 Method:

ILT-U-1185Active ingredient determination (amoxicillin)

Description: Amoxicillin by liquid chromatography HPLC UV. Method:

ILT-U-1192Active ingredient determination (chlortetracycline)

Description: Chlortetracycline by liquid chromatography HPLC UV. Method:

ILT-U-1190Active ingredient determination (dexamethasone)

Description: Dexamethasone acetate by liquid chromatography HPLC UV. Method:

ILT-U-1189Active ingredient determination (dichlorvos)

Description: Dichlorvos by liquid chromatography HPLC UV. Method:

ILT-U-1193Active ingredient determination (doxycycline)

Description: Doxycycline by liquid chromatography HPLC UV. Method:

ILT-U-1186Active ingredient determination (Ivermectin)

Description: Ivermectin by liquid chromatography HPLC UV. Method:

ILT-U-1191Active ingredient determination (trimethoprim and sulfadiazine)

Description: Trimethoprim and sulfadiazine by liquid chromatography HPLC UV. Method:

ILT-U-1187Active ingredient determination (trimethoprim and sulfamethoxazole)

Description: Trimethoprim and sulfamethoxazole by liquid chromatography HPLC UV. Method:

ILT-U-1188Active ingredient determination (vitamins B1, B2, B6)

Description: Vitamins B1, B2, B6 by liquid chromatography HPLC UV. Method:

ILT-U-661Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion

Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion

ILT-U-1508Adherence in cookware determination

Description: Milk antiadherence test; Non-stick egg assay; Grid Testing; Abrasion test; Corrosion test with sodium chloride; and Corrosion test with detergent solution Method: NBR 15231

ILT-U-1508Adherence in cookware determination. CG

Description: Milk antiadherence test; Non-stick egg assay; Grid Testing; Abrasion test; Corrosion test with sodium chloride; and Corrosion test with detergent solution Method: NBR 15231

ILT-U-1406ADSL Filter determination

Description: Method: ETSI TS 101 952-3

ILT-U-1209ADSL Modem determination

Description: Method: ETSI ES 202 913

ILT-U-1106Advanced Ceramic Specific Surface Area (BET)

Description: BET – 3 – Point analysis Method: ASTM C1274

ILT-U-2133Aerosol dispenser determinations

Description: Internal diameter Aerosol Dispenser; Brimful Capacity Aerosol Dispenser; Net weight content; Hot water immersion test; and Flammability test Method: SASO 1229, SASO 1327

ILT-U-434Aflatoxin and Fumonisin determinations in feed

Description: Method:

ILT-U-855Aflatoxins B1, B2, G1, G2 determinations in wheat seed

Description: AFLATOXIN B1, B2, G1, and G2 Method:

ILT-U-896Aflatoxins determination in peanuts

Description: B1, B2, G1 and G2 Aflatoxins Method:

ILT-U-765Aflatoxins in corn, sunflower, sorghum, wheat and soy determinations

Description: Method:

ILT-U-950Aggregate and soil determinations

Description: Aggregate Sieve Analysis; Aggregate Flakiness Index; Aggregate Shell Content; and Soil Sieve Analysis using Test Sieve Method:

ILT-U-502Aggregates determinations. 1A

Description: Sieving analysis and Apparent Density Method: ASTM D422, ASTM D2854

ILT-U-1718Aggregates determinations. 1B

Description: Determination of density (Particle density and water absorption of aggregate between 40mm and 5mm); particle shape `section 105.1: Flakiness index;; particle shape Section 105.2: Elongation index of coarse aggregate; testing aggregates Part 103: particle size distribution Section 103.1: Sieve tests; determination of particle shape. Flakiness index; determination of particle shape. Shape index. (Elongation Index ); determination of particle size distribution. Sieving method (mass of fines passing the 0.063mm sieve); methods for determination of aggregate crushing value (ACV); method for determination of aggregate impact Value (AIV); test method for materials finer than 75- ?m (No. 200) sieve in mineral aggregates by washing; methods for sampling; density (Particle density and water absorption (10mm aggregate & smaller)); particle size distribution. Sieving method; ten per cent fines value (TFV); determination of shell content. Percentage of shells in coarse; sand equivalent value of soils and fine aggregate Method: EN 933-7, BS 812 Part 111, EN 933-1, BS 812 Part 112, ASTM C117, EN 933-3, EN 933-4, EN 933-8, BS 812 Part 103, BS 812 Part 102, BS 812 Part 110, BS 812 Part 105, BS 812 Part 12

ILT-U-1807Aging behavior. Weathering in dry, hot climate

Description: Duration: 1600 hs Method: PV 3929

ILT-U-1808Aging behavior. Weathering resistance, humid heat

Description: Duration: 1600 hs Method: PV 3930

ILT-U-1666Aging panels determinations

Description: Aging panels (120 hours) Method: CIE 121, CIE 63, CIE 84

ILT-U-984Agrotoxics determinations

Description: Glyphosate and 2,4D Method:

ILT-U-2088Air Filter determinations

Description: Marking and labelling Method: SASO 932, GSO 1712

ILT-U-647Air flow from caps for writing instruments

Description: Method: ISO 11540

ILT-U-647Air flow from caps for writing instruments. CG

Description: Method: ISO 11540

ILT-U-1249Aircraft textile materials fire test

Description: Vertical bunsen burner test, 45º Degree bunsen burner test, Horizontal bunsen burner test, 60º Degree bunsen burner test, and Oil burner test for seats cuchions. Method: CS/FAR 25, DOT/FAA/AR-00/12 Aircraft materials fire test handbook

ILT-U-1016Alcohol absolute determination

Description: Ethanol content of 20 ° C; higher alcohols; METHANOL; aldehydes; ESTERS; ACIDITY; CONDUCTIVITY Method:

ILT-U-1346Alcohol beverage determinations

Description: Dry extract; % Alcohol Vol; Methanol; Higher alcohols; Furfural; Acetaldehyde; Lead; and Arsenic Method:

ILT-U-2150Alkali Drain Cleaner determinations

Description: Visual Inspection; Determination of rise in temperature when dissolve in water; Determination of foaming when dissolve in water; Determination of aluminum content; Determination of sodium hydroxide content; Determination of nitrate content; and Determination of chloride/sulphate content Method: SASO 1056

ILT-U-952Alkylphenol ethoxylates determination

Description: APEO Method: ISO 18254

ILT-U-1175Alpha Olefin Sulphonate (AOS) determinations

Description: Alpha Olefin Sulphonate (AOS): Active matter and Free Alkalinity as Sodium Hydroxide Method: IS 15072, IS 4956

ILT-U-854Amino acid profile

Description: aspartic, taurine, glutamic, alanine, histidine, trypsin, serine, tryptophan, arginine, methionine, glycine, valine, threonine, phenylalanine, ornithine, isoleucine, lysine, and leucine Method:

ILT-U-905Ammoniacal nitrogen determination in wastewater

Ammoniacal nitrogen

ILT-U-868Ammonium concentration determination

Description: Method:

ILT-U-285Ammonium Nitrate, % purity by titration after treatment with formaldehyde

Description: MIL-A-175C Method: MIL-A-175C

ILT-U-877Amount of material finer than # 200 sieve in soils

Description: Method: ASTM D1140

ILT-U-1067Amoxicilline Determination

Description: Amoxicilline determination Method:

ILT-U-1207Analog telephone determination

Description: Method: ETSI ES 203-021

ILT-U-134Analysis of accessible points in Toys

Description: Clause 4.9 Method: ASTM F963

ILT-U-1897Analysis of antibiotics in food

Description: Sulfonamides (Sulfachloropyridazine, Sulfadiazine, Sulfadimethoxine, Sulfadoxine, Sulfamerazine, Sulfametazine, Sulfamethoxypyridazine, Sulfaquinolaxin, and Sulfathiazole); Chloramphenicol; Tetracyclines (Chlortetracycline, Doxycycline, Oxytetracycline, and Tetracycline); Oxolinic; Enrofloxacin; Ciprofloxacin; Flumechin; Sarafloxacin; Organochlorine Pesticides (Aldrin, Chlordane, HCH (ALFA / BETA / RANGE / DELTA), Dieldrin, Endosulfan I and II, Endosulfan sulfate, Endrin, Gamma Clordane, HCB, Heptachlor, Heptachloropoxide, Methoxychlor, ppDDD, ppDDE, ppDDT, Mirex); and PHA polynuclear aromatic hydrocarbons (Naphtalene – Acenaphtene – Fluorene – Phenantrene – Anthracene – Fluoranthene – Pyrene – Benzo (a) anthracene – Chrysene – Benzo (e) pyrene – Benzo (b) fluoranthene – Benzo (k) fluoranthene – Benzo (a) pyrene – Dibenzo (a, h) anthracene – Benzo (gi) perylene – Ideno (1,2,3-cd) pyrene) Method:

ILT-U-1852Analysis of ash and volatile combustible matter of coal.

Description: Analysis of ash and volatile combustible matter Method: ISO 562, ISO 1171

ILT-U-132Analysis of carbon and sulfur by combustion

Description: Method: ASTM E1019

ILT-U-198Analysis of concentrates of copper, lead and zinc

Description: Method:

ILT-U-643Analysis of concentrates of Iron and Graphite

Description: Iron and Graphite Method:

ILT-U-825Analysis of concentrates of Iron Ore

Description: High grade Iron Ore. Method:

ILT-U-363Analysis of concentrates of Manganese and Tungsten

Description: Manganese and Tungsten Method:

ILT-U-1178Analysis of concentrates of Rare earth elements (REE) in ore.

Description: Rare earth elements (REE) in ore. Method:

ILT-U-360Analysis of concentrates of Tin & Lithium

Description: Tin & Lithium Method:

ILT-U-859Analysis of concentrates of Uranium ore

Description: Uranium ore Method:

ILT-U-157Analysis of determination grain size

Description: Aluminum sample Method: ASTM E112

ILT-U-410Analysis of determination grain size and phase balance

Description: Duplex materials Method: ASTM E112, ASTM E562

ILT-U-258Analysis of determination grain size in steel

Description: ASTM E112 Method: ASTM E112

ILT-U-107Analysis of determination grain size in steel. 0,1

Description: Using image analyzer software Method: ASTM E112

ILT-U-051Analysis of different flour determinations

Description: Ash; Calcium; Iron; Moisture; Protein; and Fiber Method:

ILT-U-1860Analysis of different parameter of water

Description: Bicarbonate Alkalinity; Carbonate Alkalinity; Total Alkalinity; Ammonia (NH4); Calcium; Chloride; Electrical conductivity 20 ?C; Apparent Color; Carbonate Hardness; Total hardness; Iron; Magnesium; Manganese; Nitrate (N); Nitrite (N); Odor; pH; Total Dissolved Solids; Sulfate; Turbidity; Oxygen Biochemical Demand; Chemical Oxygen Demand; Total Phosphorus Total Ammoniacal Nitrogen; Total Nitrogen; and Oils and Grease Method:

ILT-U-1861Analysis of different parameters of industrial water

Description: Oils and Mineral Fats; Oils and fats Veg. E Animal; Sedimentary Solids (10 min. and 2 hours); Temperature; Total solids; Hydrogen Sulphite; Phosphate; Total solids; Silica; fluorides; Free Residual Chlorine; Dissolved Oxygen; Hexavalent chromium; Total Suspended Solids; Coliformes Totais; and Coliformes Termotolerantes Method:

ILT-U-1853Analysis of different soil determinations

Description: Materials Finer than 75-µm (No. 200); Determination of Water (Moisture) Content of Soil and Rock by Mass; Particles than less 6 Micrometers in equivalent spherical diameter 2.11 Equipment – Sedimentation Method; and pH in Soil for Corrosion Method: API 13A, ASTM D4972, ASTM C117, ASTM D2216

ILT-U-2002Analysis of flex resistance determinations

Description: Flex resistance (Dry 100.000 cycles) Method: ISO 17694

ILT-U-153Analysis of KCl, NaCl,MgCl2,CaCl2 & H2O in fertilizers

Description: Potassium chloride Method:

ILT-U-153Analysis of KCl, NaCl,MgCl2,CaCl2 & H2O in fertilizers. CH

Description: Potassium chloride Method:

ILT-U-302Analysis of macroetching metals

Description: Homogeneity or Not homogeneity of steel bar sample Method: ASTM E340, ASTM E381

ILT-U-946Analysis of metals in fruit juice

Description: Antimony; Arsenic; Cadmium; Iron; Lead; Tin; and Zinc Method:

ILT-U-498Analysis of Physicochemical determinations in foods

Description: Ash content; Fat content; Moisture; Nitrogen; Fat; TVB-N; Histamine; Nitrite content; pH; EC; TDS; Turbidity; Alkalinity; Ammonium; and Total Chlorine Method:

ILT-U-2001Analysis of slip resistance determinations

Description: Resistance determination of footwear. Method: ISO 13287

ILT-U-506Anemometer calibration

Description:
Rule :

ILT-U-1032Angle and length determinations

Description: Longitudinal and angular measurements. Method:

ILT-U-131Angle measurement in goniometers

Description: Method:

ILT-U-2308Animal and vegetable fats and oils

Description:
Standard :

ILT-U-2305Animal and vegetable fats and oils

Description:
Standard :

ILT-U-2307Animal and vegetable fats and oils

Description:
Standard :

ILT-U-2306Animal and vegetable fats and oils

Description:
Standard :

ILT-U-794Antibiotic residues in meat

Description: Chloramphenicol; and Tetracycline Method:

ILT-U-2012Apparent density and mass per unit area of leathers.

Description: Apparent density and mass per unit area Method: ISO 2420

ILT-U-1787Appliance determinations

Description: Appliances for skin or hair care Method: IEC 60335-2-23

ILT-U-1673Arid and soil determinations

Description: Granulometry; unit weight; and wear Los Angeles Method: ASTM C29, ASTM C136, ASTM C131

ILT-U-1988Arid determinations. 1A

Description: Determination of water soluble chloride salts using the Volhard method (reference method); Determination of total sulfur content; and Determination of acid soluble sulfates Method: EN 1744-1

ILT-U-935Arid determinations.1B

Description: Cubicity of particles; Apparent density of stony; Wear of the stony; and Organic impurities Method: Nch 166, Nch 1116, NCh 1369, 8.202.6 (MC-V8)

ILT-U-1584Arids determinations. 1C

Description: Determination of fine material less than 0.080 mm fine per wash less than 0.080 mm; Determination of organic impurities in the sands; and Binder content of asphalt mixtures by centrifugation, tensile test Method: Nch 1223, Método 8.302.36, diciembre 2003, Manual de carreteras, Volumen 8, NCh 166

ILT-U-736Arids determinations. 1D

Description: Granulometry of stone; Real and net density and water absorption of gravel; Real and net density and water absorption of sands; Determination of Gaps; Determination of crumbly particles; Determination. Average volumetric coefficient of gravel; and Extraction and preparation of stone samples Method: NCh 164, NCh 165, NCh 1511, NCh 1326, NCh 1327, NCh 1117, NCh 1239

ILT-U-1745Artificial Intelligence – Machine Learning – Deep Learning. How much can it learn?

Description: F1-score Mean Value Method:

ILT-I-04Asbestos Inspection

Description: For inspection bodies and Test laboratories, (FTIR / PLM method). Method:

ILT-U-922Ash Content in Plastics

Description: Method: ASTM D5630

ILT-U-567Ash content of lubricating greases

Description: Method: ASTM D482

ILT-U-1197Ash determination in coke

Description: ash determination by Atomic Emission Spectroscopy Method:

ILT-U-1009Ash determination in PVC pipes and connections

Description: Method A Method: NBR NM 84

ILT-U-730Ash, moisture and pH determinations in food

Description: Method:

ILT-U-1715Assessment of resistance of materials to molten metal splash

Description: Assessment of resistance of materials to molten metal splash Method: ISO 9185

ILT-U-1715Assessment of resistance of materials to molten metal splash. PS

Description: Assessment of resistance of materials to molten metal splash Method: ISO 9185

ILT-U-1591Audio/video, information and communication technology equipment

Description: Safety requirements Method: IEC 62368-1

ILT-U-543Authentication, Toxins and GMO in Basmati Rice

Description: Total Aflatoxin (B1, B2, G1 y G2); Aflatoxin B1, Ochratoxin, T2/HT2 Toxin, Zearelanone, GMO Test, and Basmati Rice Authentication test Method: HPLC

ILT-U-1466Automatic electrical control

Description: Method: IEC 60730-1

ILT-U-203Average grain size test on cooper

Description: ISO 2624 Method: ISO 2624

ILT-E-09Average grain size test on steels. Open

Description: ASTM E112 Method: ASTM E112, ISO 643

ILT-U-1021Azo dyes in textile

Description: Method: ISO 14362-1

ILT-U-1146Baby bottles determinations

Description: Impact, Torsion, and Traction Method: NBR 13793

ILT-U-1146Baby bottles determinations.CG

Description: Impact, Torsion, and Traction Method: NBR 13793

ILT-U-460Baby cribs, play yard, bassinets and cradles determinations

Description: Physical & Mechanical Test; Toxicity (CPSIA Lead); Flammability (16 CFR 1500.3) and CPSIA Phthalates Method: ASTM F2194, ASTM F406

ILT-U-463Baby cribs, play yard, bassinets and cradles determinations. 1A

Description: ASTM F2194 Method: ASTM F2194

ILT-U-463Baby cribs, play yard, bassinets and cradles determinations. CG

Description: ASTM F2194 Method: ASTM F2194

ILT-U-1779Baby diaper and sanitary pad for ladies determinations

Description: pH; Dimension; and Water absorption Method: GSO 143, GSO 750

ILT-U-818Baby items determinations

Description: Peroxide determination; and DTX Test Method: NBR 10334, NBR 13793

ILT-U-818Baby items determinations. CG

Description: Peroxide determination; and DTX Test Method: NBR 10334, NBR 13793

ILT-U-789Baby stroller determinations

Description: Irregular surface test; Stability; and Holes and openings Method: EN 1888, NBR 14389

ILT-U-593Bacterial endotoxin determination

Description: Bacterial endotoxin Method:

ILT-U-1170Ball pressure test

Description: Method: IEC 60695-10-2

ILT-U-2270Ballistic determinations

Descripcion:
Norma :

ILT-U-546Bassinets and cradles determinations. 1A

Description: Method: 16 CFR 1220, ASTM F406

ILT-U-545Bassinets and cradles determinations. 1B

Description: Method: ASTM F2194, 16 CFR 1218

ILT-U-544Bassinets and cradles determinations. 1C

Description: Method: ASTM F2194

ILT-U-117Batteries determinations

Description: LR6-2 – Portable lighting LED R6P-2 – Portable lighting LED Method: IEC 60086-2

ILT-U-1697Battery chargers determinations

Description: Battery chargers Method: IEC 60335-2-29

ILT-U-1806Behavior in steam jet

Description: 18 days. Method A Method: PV 1503

ILT-U-1266Beilstein Test

Description: Detect chlorine in vynils; hydro chlorinated rubbers; and chloroprene rubber-based adhesives Method:

ILT-U-1266Beilstein Test.CG

Description: Detect chlorine in vynils; hydro chlorinated rubbers; and chloroprene rubber-based adhesives Method:

ILT-U-387Bend determination

Description: Bend determination Method: ASTM E290

ILT-U-606Bend test – Destructive test on welds in metallic materials

Description: Method: ISO 5173

ILT-U-994Bend testing – corrugated steel bar

Description: Method: ASTM A615

ILT-U-1706Bend testing of welds

Description: Method: AWS B4.0

ILT-U-753Bending steel

Description: Bend. Method: ISO 7438, VDA 238-100, Nch 201

ILT-U-017Bending test of steel

Description: ASME SECC. IX ED. 2010 Method: ASME SECC. IX

ILT-U-1148Bending tests in pen

Description: Method: NBR 15236

ILT-U-1276Bending welded steel sample

Description: Bend Method: ASTM E190, ASTM A370, ASME BPVC Section IX

ILT-U-293Benzene determination charcoal tubes

Description: NIOSH 1501 Method: NIOSH 1501

ILT-U-769Beta-carotenes determination in canned tomato

Description: Method:

ILT-U-577Beverages determinations

Description: Benzoic Ac, Ac ascorbic, caffeine, and Preservatives (sorbic acid and benzoic acid) Method:

ILT-U-861Bicycle test – Cycled of pedals

Description: ISO 4210 part 8. (4.8.2.) Method: ISO 4210

ILT-U-1330Biodiesel (glycerine) determinations

Description: Determination of free and total glycerol and mono-, di- and triglyceride content Method: EN 14105

ILT-U-839Biodiesel Corrosion determinations

Description: Corrosion (copper foil method) Method: ASTM D130

ILT-U-806Biodiesel determination. 1A

Description: Water Content; flash point; kinematic viscosity,40ºC; density at 15ºC; monoglyceride content; diglyceride content; triglyceride content; free glycerol; total glycerol; acid number; oxidation stability; cloud point; ester content; linolenic acid methyl ester; total contamination; and cold soak filtration test Method: EN 14112, EN 14103, EN 12662, ASTM D2500, EN 14105, ASTM D4052, ASTM D445, ASTM D93, ASTM D4928, ASTM D7501, ASTM D664, EN 15751

ILT-U-2101Biodiesel determinations. 1B

Description: Mo, Be and Te elements Method:

ILT-U-729Biodiesel determinations. 1D

Description: Monoglycerides; Diglycerides; Triglycerides; Total Glycerin; Glycerin Free; Ethanol; Methanol and Content of esters Method: EN 14103, EN 14110, ASTM D6584

ILT-U-1635Biodiesel determinations. 1F

Description: Water content; flash point; kinematic viscosity, 40ºC; density at 15ºC; content of monoglycerides; content of diglycerides; triglyceride content; free glycerol; total glycerol; acid number; stability of oxidation; cloud point; content of ester; methylene ester of linolenic acid; and total pollution; hot cold filtration test Method: ASTM D93, ASTM D6751, EN 14103, EN 12662, ASTM D664, EN 14112, ASTM D2500, ASTM D1298, ASTM D445, EN 14105, ASTM D4928

ILT-U-1159Biodiesel determinations. 1C

Description: Fatty acid / methyl esters – Determination of calcium, magnesium, sodium, phosphorus and potassium contents; Determination of the total ester content; Flash point by Pensky-Martens closed cup tester; Corrosiveness to copper from petroleum products by copper strip test; Kinematic viscosity of transparent and opaque liquids (and calculation of dynamic viscosity; Acid number of petroleum products by potentiometric titration; Sulfated ash from lubricating oils and additives. Density and relative density of liquids by digital density meter; Determination of additive elements in lubricating oils; Determination of total sulfur in light hydrocarbons, spark ignition engine fuel, diesel engine fuel, and engine oil; Determination of water in petroleum products, lubricating oils, and additives; Cold filter plugging point of Diesel and heating fuels; Determination of total monoglyceride, total diglyceride, total triglyceride, and free and total glycerin in b-100 biodiesel methyl esters; Determination of ignition delay and derived cetane number (DCN) of Diesel fuel oils; Determination of cold filter plugging point; Corrosiveness to copper – Copper strip test; Transparent and opaque liquids – Determination of kinematic viscosity and calculation of dynamic viscosity; Determination of flash point – Rapid equilibrium closed cup method; Determination of sulfated ash; Determination of the ignition quality of diesel fuels – Cetane engine method; Crude petroleum and liquid petroleum products. Oscillating U-tube method; Determination of contamination in middle distillates; Determination of water – Coulometric Karl Fischer titration method; Fatty acid methyl esters (FAME) (ester and linolenic acid methyl ester contents, phosphorous content, free and total glycerol and mono-, di- and triglyceride content, Determination of methanol content, iodine value, oxidation stability and Ca, K, Mg and Na content); plasma (ICP-OES); and Determination of sulfur content of automotive fuels. Method: ASTM D93, ASTM D445, ASTM D664, ASTM D130, ASTM D6304, ASTM D5453, EN 14538, EN 14112, EN 14110, EN 14103, EN 12662, ASTM D4052, ASTM D6584, ASTM D6890, ISO 2160, EN 116, ASTM D6371, ISO 12185, ISO 12937, EN 14107, ISO 3104, EN 14111, ISO 3987, ISO 3679, ISO 20846, ISO 5165, ASTM D4951, ASTM D874, NBR 15553, NBR 15764

ILT-U-807Biodiesel determinations. 1E

Description: Cetane number; Contamination and Corrosion (copper foil method) Method: ASTM D6890, EN 12662, ASTM D130

ILT-U-542Biomass determination. 1A

Description: Method: EN 14774-1, EN 14775, EN 15148, EN 15104, EN 15289

ILT-U-1222Biomass determination. 1B

Description: Ash content; Moisture; and Organic Matter Method: ASTM D2974

ILT-U-499Biomass determinations

Description: GCV, % ash, % Sulphur and % Carbon value. Method:

ILT-U-1280Bitumen content of asphalt

Description: Bitumen content of asphalt Method: ASTM D6307, ASTM D2172

ILT-U-1208Boldina determination

Description: Qualitative Method:

ILT-U-1736Brake and suspension determinations

Description: Brake Testing System; Suspension Testing System; and Side slip Method: SASO 1284, GSO 971

ILT-U-479Breaking force and extension at break of shoe laces

Description: Dry and Wet Method: SATR TM94

ILT-U-1090Breaking load test of slings (lifting cranes)

Description: Inspection bodies Method: ASME B30.9

ILT-U-1090Breaking load test of slings (lifting cranes). IP

Description: Inspection bodies Method: ASME B30.9

ILT-U-574Brinell Hardness

Description: HBW 1/30 Method: ASTM E10, ISO 6506

ILT-U-574Brinell Hardness. CB

Description: HBW 1/30 Method: ASTM E10, ISO 6506

ILT-U-270Bromate determination in water

Description: EPA 317.0 Method: EPA 317.0

ILT-U-1329BTEX and MTBE determination

Description: Sample water Method:

ILT-U-1506BTEX determination in activated carbon

Description: Method:

ILT-U-726BTEX, PAH, TPH and Ethanol determination in soil

BTEX, PAH, TPH

ILT-U-1349BTEX, TPH and PAH in soils and water

Description: BTEX, TPH and PAH Method:

ILT-U-911Bulk density and volatile matter determinations in Polyvinyl chloride

Description: Bulk density and Volatile matter Method: ASTM D2584, ASTM D1622

ILT-U-1579Burning behavior – measurement of flame spread properties of vertically oriented

Description: Method: ISO 6941

ILT-U-983Bursting strength and bursting distension determinationin textile

Description: Bursting strength; and Bursting distension Method: ISO 13938-1

ILT-U-986Bursting Strength of Textiles

Description: bursting strength of textiles—constant-rate-of-traverse (CRT) Ball Burst Test Method: ASTM D3787

ILT-U-221Cadmium determination in consumer goods

Description: EN 1122 Method: EN 1122

ILT-U-1142Caffeine determination

Description: Method:

ILT-U-1234Calcium, sodium and phosphorus determinations in chicken

Description: Calcium; Phosphorus; and Sodium Method:

ILT-U-457Calibration of electrical magnitudes

Description: Voltage (DC); Voltage (AC @ 50 Hz); Current (DC); Current (AC @ 50 Hz); Frecuency; and Resistance Method:

ILT-U-2050Calibration of electrical safety tester

Description: Calibration, Insulation resistance DC. Calibration, Ground bond test. Method:

ILT-U-1725Calibration of network analyzer equipment

Description: Tension Method:

ILT-U-847Calibration of pH meter

Description: pH=4, pH=7, and pH=10 Method:

ILT-U-882Calibration of pressure gauge

Description: Range 0-21 bar Method:

ILT-U-1042Calibration of Sphygmomanometers

Description: Manual and Digital Sphygmomanometers Method:

ILT-U-778Calibration of temperature sensors

Description: PT100 temperature resistance range -30 °C to + 400 °C; and Thermocouple K range 400 °C to 1100 °C Method:

ILT-U-1643caliper gauge. 1A

Description: caliper 0-300 mm (Reading 0.02mm) Method:

ILT-U-377caliper gauge. 1B

Description: caliper 0-1000 mm (Reading 0.02mm). Method:

ILT-U-842Calorific value (top/ bottom) determination

Description: Calorific value top and Calorific value bottom Method:

ILT-U-1565calorific value determination

Description: Determination of the gross heat of combustion Method: ISO 1716

ILT-U-223Can examination program

Description: Closing Evaluation or Double seam Method:

ILT-U-1821Candles determinations

Description: Sooting behaviour; Fire safety; and Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers Method: ASTM F2179, EN 15426, EN 15493

ILT-U-2085Candles determinations. 1A

Description: Sooting behavior (container candle) Method: EN 15426

ILT-U-2084Candles determinations. 1B

Description: Burning test (2 weeks) Method: EN 15493

ILT-U-1876Canned fish organoleptic physicist

Description: External appearance; Internal appearance; Type of container; Species; Presentation; Appearance; Smell and taste; Texture; and Parasites Method:

ILT-U-1359Canned meat and coffee determinations

Description: Clostridium sulfite reductant; Coagulase positive Staphylococcus count; and Caffeine Method:

ILT-U-1373Canned meat and water determination

Description: Total count of heterotrophic bacteria; NMP Total coliforms; Fecal coliforms; Escherichia Coli; Presence / absence of Total Coliforms; Total count of mesophilic aerobic bacteria; and NMP Total Coliforms Method:

ILT-U-1373Canned meat and water determination. WT

Description: Total count of heterotrophic bacteria; NMP Total coliforms; Fecal coliforms; Escherichia Coli; Presence / absence of Total Coliforms; Total count of mesophilic aerobic bacteria; and NMP Total Coliforms Method:

ILT-U-1133Canned meat determination. 1A

Description: protein determination by Dumas method, Energy by Bomb calorimeter and Kcal/100g by calculation. Method:

ILT-U-1454Canned meat determinations. 1B

Description: Calorific value; Carbohydrates; Proteins; Humidity; Total Fat; Ashes; and Dietary / food fiber Method:

ILT-U-1453Canned meat determinations. 1C

Description: Antibiotics (qualitative); Humidity; Protein; Total Fat; Starch; Nitrites; Nitrates; Chlorides; Calcium; Phosphorus; Ashes; Peroxide Index; Total sugars; Sodium chloride; and pH Method:

ILT-U-1494Canned vegetables pesticides determinations

Description: Chlorpirifos ethyl; Diazinon; Disulfoton; and Parathion ethyl Method:

ILT-U-603Carbon black determinations. 1B

Description: Sieve Residue, %; and Surface Area by Multi-Point Nitrogen Surface Area Adsorption Method: ASTM D1514, ASTM D6556

ILT-U-604Carbon black determinations. 1C

Description: Iodine Absorption Number; Oil Absorption Number {OAN}; and Tinting Strength, g/100g Method: ASTM D1510, ASTM D2414, ASTM D3265

ILT-U-1015Carbon black determinations.1A

Description: Absorbance of cyclohexane extract and Determination of solvent extractable materials Method: ASTM D7772, ISO 6209

ILT-U-1693Carbon determinations

Description: Iodine Number-Carbon Black; Oil Absorption Number; Crushed Oil Absorption Number; Tint Strength; Sieve Analysis-Carbon Black – 35 Mesh; Sieve Analysis-Carbon Black – 325 Mesh; Pellet Hardness; and N2SA/STSA Method: ASTM D6556, ASTM D1514, ASTM D3265, ASTM D2414, ASTM D1510, ASTM D5230, ASTM D3493

ILT-U-1642Cardboard determinations

Description: Water absorption capacity – cobb method; thickness; grammage; resistance to column compression; and seal strength of flexible barrier materials (Technique A – unsupported) Method: ISO 535, ISO 536, ISO 3034, ISO 3037, ASTM F88

ILT-U-1577Carpets determination

Description: Determination of tuft withdrawal force Method: ISO 4919

ILT-U-362Cartridge determination

Description: Yield determination Method: ISO 24712

ILT-U-2079Castors and wheels determination

Description: Castors and wheels Type U+ Type H Method: EN 15259

ILT-U-2078Castors and wheels determination. 1A

Description: Castors and wheels Type U+ Type W Method: EN 15259

ILT-U-2077Castors and wheels determination. 1B

Description: Castor test Method: EN 12527, EN 12528

ILT-U-2079Castors and wheels determination. H

Description: Castors and wheels Type U+ Type H Method: EN 15259

ILT-U-2078Castors and wheels determination. W

Description: Castors and wheels Type U+ Type W Method: EN 15259

ILT-U-1793Cathodic disbondment determination

Description: Cathodic disbondment Method: ISO 21809-3, ASTM G8, ASTM G42

ILT-U-505CBR and humidity determination

Description: Method: ASTM D1883, ASTM D2216

ILT-U-1612Cement determination. 1A

Description: Composition and notation; and designation Method: BS EN 197-1

ILT-U-1154Cement determinations. 1B

Description: Part size distribution and Compaction-related tests determination of dry density/ moisture content relationship Method: BS 1377-4, BS 1377-2

ILT-U-1060Cement determinations. 1C

Description: Chlorides; Compressive strength; and Specific surface Blaine Method:

ILT-U-958Cement determinations. 1D

Description: Normal consistency; Forged times; Volume expansion in autoclave; Air content; Compressive strength; Blaine fineness; Fineness 45 µm; False set; and Expanding cement mortar bars immersed in water Method: ASTM C1038, ASTM C451, ASTM C430, ASTM C204, ASTM C109, ASTM C185, ASTM C151, ASTM C191, ASTM C187

ILT-U-1587Cement setting reaction determination

Description: cement setting reaction Method: NCh 152

ILT-U-2200Ceramic determinations. 1A

Description: Deep Abrasion Method: ASTM C1243

ILT-U-2195Ceramic determinations. 1B

Description: Water Absorption and Bulk Specific Gravity / Density Method: ASTM C97

ILT-U-2194Ceramic determinations. 1C

Description: Mohs Scratch Hardness Method: ASTM C1895

ILT-U-2193Ceramic determinations. 1D

Description: M.O.R. & Breaking Strength Method: ASTM C1505

ILT-U-2192Ceramic determinations. 1E

Description: Dynamic Coefficient of Friction. (DCOF—wet only) Method: ANSI A326.3

ILT-U-2190Ceramic determinations. 1F

Description: Staining Resistance Method: ASTM C1378

ILT-U-2188Ceramic determinations. 1G

Description: Surface Abrasion Method: ASTM C1027

ILT-U-2181Ceramic determinations. 1H

Description: Water Absorption Method: ASTM C373

ILT-U-2178Ceramic determinations. 1I

Description: Determination of Solar Reflectance Index Method: ASTM E1980

ILT-U-2177Ceramic determinations. 1J

Description: Determination of Organic Emissions. (Not per CA 01350) Method: ASTM D5116

ILT-U-2177Ceramic determinations. 1J CG

Description: Determination of Organic Emissions. (Not per CA 01350) Method: ASTM D5116

ILT-U-2176Ceramic determinations. 1K

Description: Lead and Cadmium Extracted from Glazed Ceramic Tile Method: ASTM C895

ILT-U-2176Ceramic determinations. 1K CG

Description: Lead and Cadmium Extracted from Glazed Ceramic Tile Method: ASTM C895

ILT-U-2180Ceramic determinations. 1L

Description: Linear Thermal Expansion. T from – 4°F (-20°C) to 212°F (100°C) Method: ASTM C372

ILT-U-2180Ceramic determinations. 1L CG

Description: Linear Thermal Expansion. T from – 4°F (-20°C) to 212°F (100°C) Method: ASTM C372

ILT-U-2179Ceramic determinations. 1M

Description: Mounting Allowable Deviation from Nominal Joint Size; Bond Strength; Compressive Strength; and Thermal Shock Resistance Method: ANSI A137.2

ILT-U-2179Ceramic determinations. 1M CG

Description: Mounting Allowable Deviation from Nominal Joint Size; Bond Strength; Compressive Strength; and Thermal Shock Resistance Method: ANSI A137.2

ILT-U-2184Ceramic determinations. 1N

Description: Measurement of Light Reflectance Value & Small Color Differences Method: ASTM C609

ILT-U-2184Ceramic determinations. 1N CG

Description: Measurement of Light Reflectance Value & Small Color Differences Method: ASTM C609

ILT-U-2183Ceramic determinations. 1O

Description: Warpage; Facial dimensions and thickness; and Wedging Method: ASTM C502, ASTM C499, ASTM C485

ILT-U-2183Ceramic determinations. 1O CG

Description: Warpage; Facial dimensions and thickness; and Wedging Method: ASTM C502, ASTM C499, ASTM C485

ILT-U-2182Ceramic determinations. 1P

Description: Crazing Resistance Method: ASTM C424

ILT-U-2182Ceramic determinations. 1P CG

Description: Crazing Resistance Method: ASTM C424

ILT-U-2187Ceramic determinations. 1Q

Description: Freeze-Thaw – up to 300 cycles Method: ASTM C1026

ILT-U-2187Ceramic determinations. 1Q CG

Description: Freeze-Thaw – up to 300 cycles Method: ASTM C1026

ILT-U-2186Ceramic determinations. 1R

Description: Chemical Resistance Method: ASTM C650

ILT-U-2186Ceramic determinations. 1R CG

Description: Chemical Resistance Method: ASTM C650

ILT-U-2185Ceramic determinations. 1S

Description: Breaking Strength Method: ASTM C648

ILT-U-2185Ceramic determinations. 1S CG

Description: Breaking Strength Method: ASTM C648

ILT-U-2189Ceramic determinations. 1T

Description: Static Coefficient of Friction (wet-dry) Method: ASTM C1028

ILT-U-2189Ceramic determinations. 1T CG

Description: Static Coefficient of Friction (wet-dry) Method: ASTM C1028

ILT-U-2226Ceramic, glass and enamels determination

Description: Ceramic articles intended to come into contact with foodstuffs. Extractable Pb, Cd in 4% acetic acid Method: Directive 84/500/EEC

ILT-U-404Cereal & pulses, Guar gum, Spices & condiment, Oil seeds and Drinking water determinations

Description: AOAC Method:

ILT-U-276Cereal determination. 1A

Description: Moisture; protein; fat; ash; dietary fiber; vitamin A; vitamin C; vitamin B1; vitamin B2; calcium; iron Method:

ILT-U-583Cereal determinations. 1B

Description: Iron; Vitamins (B1-B2); Total Nitrogen; Mesophilic aerobic microorganisms count; Bacillus cereus count; and Yeast and mold count Method:

ILT-U-1393Chair determinations. 1A

Description: Method: ISO 21015

ILT-U-1375Chair determinations. 1B

Description: Method: ANSI/BIFMA X5.1

ILT-U-195Change of colour with accelerated ageing in leather

Description: Heat aging in a stove at 60 ºc for 24 hours (Method 6A); and Heat aging and humidity in a climatic chamber at 50 ºc and 90% hr for 24 hours (Method 7A) Method: ISO 17228

ILT-U-1529Chemical analysis of aluminum

Description: Fe; Si; Zn; V; Cr; and Na Method:

ILT-U-745Chemical Analysis of Chocolate Drink Powder

Description: Ory matter; Ash (550°C); Fat (total); Protein (N x 6.25); Vitamin A; Vitamin B1; Vitamin 03; Calcium; Phosphorus; Lead; Cadmium; Sucrose; and Lactose Method:

ILT-U-2273Chemical analysis of copper/nickel alloys

Descripcion:
Norma :

ILT-U-2271Chemical analysis of ferrous alloy steel

Descripcion:
Norma :

ILT-U-1137Chemical analysis of metals

Description: Method: EN 14726

ILT-U-1122Chemical analysis of N, H and O

Description: Determination of Hydrogen; and Oxygen by Infrared detection. Determination of Nitrogen by Thermal conductivity. Method:

ILT-U-1099Chemical Analysis of Steel

Description: Manganese determination Method: ASTM E1086, ASTM E415

ILT-U-371Chemical Analysis of Steel samples

Description: B, V, Cu, and Sn Method: ASTM E415

ILT-U-024Chemical Analysis of Steel samples. 0,1

Description: Method: ASTM A751

ILT-U-1270Chemical Analysis of Steel samples. 0,2

Description: Method: ASTM E1086, ASTM E415

ILT-U-1050Chemical Analysis of Steel samples. 0,3

Description: Vanadium and copper. Method:

ILT-U-067Chemical Analysis of Steel samples. 0,4

Description: ASTM E1086 and ASTM E415 Method: ASTM E415, ASTM E1019

ILT-E-22Chemical Analysis of Steel samples. 0,5

Description: ASTM E1086 and ASTM E415 Method: ASTM E415, ASTM E1086

ILT-U-636Chemical analysis of Tin metal samples

Description: Arsenic, Bismuth, Cooper, Lead, Iron, Antimony, Tin Method:

ILT-U-1487Chemical analysis of titanium samples

Description: Method:

ILT-U-2272Chemical analysis of zinc alloys

Descripcion:
Norma :

ILT-U-026Chemical and Physical determinations in Fish Meal and Fish Oil

Description: Method:

ILT-U-870Chemical composition of manganese steel

Description: Method: ASTM E2209

ILT-U-2137Chemical Depilatory determinations

Description: Determination of calcium% in Thioglycolic acid; Thermal stability test; and Determination of sulphide content Method: SASO 1745

ILT-U-1758Chemical determinations in cement. 1A

Description: Loss on ignition, Alumnia, Al2O3, Dry, Calcium oxide, Cao, Dry, Free calcium oxide, CaO%, Chlorine, Cl, Dry, Iron oxide, Fe2O3, Dry, Magnesium oxide, MgO, Dry, Potassium Oxide, K2O, Dry, Silica, SiO2, Dry, Sodium oxide, Na2O, Dry, and Sulfur Trioxide, SO3, Dry Method:

ILT-U-1709Chemical determinations in cement. 1B

Description: MgO Magnesium oxide; manganese oxide Mn2O3, loss on Calcination; insoluble residue; and S03 sulfur trioxide Method: ASTM C114

ILT-U-592Chemical tests in leather

Description: pH Method: ISO 4045

ILT-U-1361Chicken pathogens determination

Description: Salmonella; Listeria; and Campylobacter Method:

ILT-U-1720Child-resistant packaging test

Description: Testing of re-closable child-resistant packaging. Method: ISO 8317

ILT-U-1720Child-resistant packaging test. TO

Description: Testing of re-closable child-resistant packaging. Method: ISO 8317

ILT-U-737Children´s products and articles holidays school stuff determinations

Description: Total bacterial count; Count of yeasts and molds; Pseudomonas aeruginosa; Staphylococcus aureus; and Escherichia coli Method:

ILT-U-1669Children’s clothing determinations

Description: Cords and drawstrings on children’s clothing. Method: CNS 15291 L1037

ILT-U-1669Children’s clothing determinations. TY

Description: Cords and drawstrings on children’s clothing. Method: CNS 15291 L1037

ILT-U-670Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems

Description: Method: ASTM D2846

ILT-U-381Chlorine – Bomb combustion & ISE, Fluorine – Bomb combustion & ISE and Minor and Major Elements (Coal Ash)

Description: XRF in Coal Method: ASTM D4208, ASTM D3761

ILT-U-381Chlorine – Bomb combustion & ISE, Fluorine – Bomb combustion & ISE and Minor and Major Elements (Coal Ash). CH

Description: XRF in Coal Method: ASTM D4208, ASTM D3761

ILT-U-779Chlorophyll determination in water

Description: Spectrophotometric method Method:

ILT-U-449Cholesterol determination

Description: Gaseous chromatography Method:

ILT-U-1651Chromium VI in leather

Description: Chromium VI Method: ISO 17075

ILT-U-1563Climatic test – Vibration (sinusoidal)

Description: Vibration (sinusoidal); 66 hs (22 for each cyle); 3 cycles Method: IEC 60068-2-6, ISO 16750-3

ILT-U-549Climatic Test (humidity and temperature) for shipping containers

Description: Method: ISTA

ILT-U-549Climatic Test (humidity and temperature) for shipping containers. PK

Description: Method: ISTA

ILT-U-1562Climatic test. 1A

Description: *85°C / 85% UR; 168 hs; 1 cycles Method: IEC 60068-2-67

ILT-U-1560Climatic test. 1B

Description: *0°C / T max °C; 1 hs; 10 cycle (ISO 16750-4 chapter 5.4.3) Method: ISO 16750-4

ILT-U-1559Climatic test. 1C

Description: *20°C / -40°C / 140°C; 5 hs; 1 cycle (ISO 16750-4 chapter 5.2) Method: ISO 16750-4

ILT-U-1557Climatic test. 1D

Description: 55°C / -10°C / 25°C; 20 / 65 / 80 / 96 %UR; 24 hs; 11 cycles Method: IEC 60068-2-38

ILT-U-1238Clostridium perfringens and Enterobacteria determination

Description: Clostridium perfringens (food); and Enterobacteria (water) Method:

ILT-U-1238Clostridium perfringens and Enterobacteria determination. WT

Description: Clostridium perfringens (food); and Enterobacteria (water) Method:

ILT-U-772Clostridium Perfringens and sulphite-reducing clostridia determination

Description: Water, chicken and meat Method:

ILT-U-772Clostridium Perfringens and sulphite-reducing clostridia determination. WT

Description: Water, chicken and meat Method:

ILT-U-587Closure strength of touch and close fasteners

Description: Peel + shear; and peel + shear – after fastener 5000 revolutions Method: SATRA TM123

ILT-U-213Coal and coke determinations

Description: Ash content; volatile matter; fixed Carbon; inherent moisture; moisture; hardgrove index; chlorine; and fluorine Method: ASTM D3761, ASTM D4208, ASTM D409, ASTM D3302, ASTM D3173, ASTM D3172, ASTM D3175, ASTM D3174

ILT-U-213Coal and coke determinations. 1A

Description: Ash content; volatile matter; fixed Carbon; inherent moisture; moisture; hardgrove index; chlorine; and fluorine Method: ASTM D3761, ASTM D3302, ASTM D4208, ASTM D409, ASTM D3173, ASTM D3172, ASTM D3175, ASTM D3174

ILT-U-1999Coal determinations

Description: Te and Sn elements Method:

ILT-U-1999Coal determinations. HY

Description: Te and Sn elements Method:

ILT-U-358Coal determnations

Description: Moisture; Total in Coal; Ash Content of Petroleum Products; Volatile Matter; and Sulfur Total Method: ASTM D3302, ASTM D482, ASTM D3175, ASTM D3177

ILT-U-358Coal determnations. CH

Description: Moisture; Total in Coal; Ash Content of Petroleum Products; Volatile Matter; and Sulfur Total Method: ASTM D3302, ASTM D482, ASTM D3175, ASTM D3177

ILT-U-1138Coating mass determination

Description: Hot dip galvanized coatings Method: ISO 1460

ILT-U-2225Coatings intended to come into contact with foodstuffs determination

Description: Coatings intended to come into contact with foodstuffs. Overall migration in 10% ethanol (pH>4.5 aqueous foods); Overall migration in 3% acetic acid (pH?4.5 acidic foods); Overall migration in 20% ethanol (alcohol content?20% foods); Overall migration in 50% ethanol (alcohol content>20% or oil in water emulsions); and Overall migration in rectified olive oil or substitute of rectified olive oil. Method:

ILT-U-1134Cobalt and Arsenic determination in human urine

Description: Method:

ILT-U-803Cobble determinations

Description: Shapes and dimensions; Breaking Strength (indirect tensile); Abrasion (wear wide wheel method); and Resistance Absorption Method: EN 1338

ILT-U-507Cocoa determinations

Descripcion:
Norma :

ILT-U-517Coefficients of friction

Description: Method: ASTM D1894

ILT-U-918Coffee sensory analysis

Description: Cupping; and cup´s defects Method:

ILT-U-011Coke and coal determinations. 1B

Description: Sulfur; gross calorific value; net calorific value; carbon; total hydrogen; nitrogen; and total oxygen Method: ASTM D3176, ASTM D5373, ASTM D5865, ASTM D4239

ILT-U-011Coke and coal determinations. HY

Description: Sulfur; gross calorific value; net calorific value; carbon; total hydrogen; nitrogen; and total oxygen Method: ASTM D3176, ASTM D5373, ASTM D5865, ASTM D4239

ILT-U-1295Color and color difference in paint determination

Description: color and color difference Method: ASTM D2244, ASTM E1164

ILT-U-321Color APHA determination in water

Description: Color APHA Method:

ILT-U-1221Color determination in drinking water

Description: SM 2120 C Method:

ILT-U-1714Color difference and reflectance

Description: Color and reflectance (250nm to 2500nm) Method: ASTM E903

ILT-U-1374Color fastness to laundering

Description: C1S & C2S Method: ISO 105-C06

ILT-U-1782Color fastness to organic solvents determination

Description: To organic solvents Method: ISO 105 X05

ILT-U-1027Color fastness to rubbing – Veslic

Description: Dry felt and wet felt Method: ISO 11640

ILT-U-045Color fastness to washing

Description: ISO 105-C06:1994 Method: ISO 105-C06

ILT-U-2231Colorants in plastic materials determination

Description: Colorants in plastic materials and articles coming into contact with food. No visible migration (for finished products); Metals and metalloids; Carbon black (only for carbon black); Inorganic cadmium pigments; Unsulphonated Aromatic amines(only for powder sample, and indicate test according to pigments or dyes ); Specific aromatic amine(Benzidine, 2-naphthylamine, 4-aminodiphenyl) and sulphonated aromatic amines; and Polychlorinated biphenyls Method: Council of Europe AP(89)1

ILT-U-2231Colorants in plastic materials determination. CG

Description: Colorants in plastic materials and articles coming into contact with food. No visible migration (for finished products); Metals and metalloids; Carbon black (only for carbon black); Inorganic cadmium pigments; Unsulphonated Aromatic amines(only for powder sample, and indicate test according to pigments or dyes ); Specific aromatic amine(Benzidine, 2-naphthylamine, 4-aminodiphenyl) and sulphonated aromatic amines; and Polychlorinated biphenyls Method: Council of Europe AP(89)1

ILT-U-774Colorfastness determination in watersea

Description: Method: AATCC 106

ILT-U-169Colorfastness to Laundering: Accelerated

Description: AATCC 61 Method: AATCC 61

ILT-U-843Colour fastness determinations in textile

Description: Determinations of colour fastness to perspiration; colour fastness to rubbing; and colour fasness to hot pressing. Method: ISO 105 E04, ISO 105 X12, ISO 105 X11

ILT-U-1019Colour fastness to bleaching determination in textile

Description: colour fastness to bleaching (Hypochlorite) Method: ISO 105 N01

ILT-U-293Colour fastness to circular rubbing

Description: Dry 256 revolutions and wet 128 revolutions Method: SATRA TM8

ILT-U-1100Colour fastness to hot pressing

Description: Method: ISO 105 X11

ILT-U-638Colour fastness to rubbing determination in Textile. 1A

Description: Colour fastness to rubbing Method: EN ISO 17700 – A

ILT-U-452Colour fastness to rubbing determination in Textile. 1B

Description: Colour fastness to rubbing Method: ISO 105 X2

ILT-U-1279Colour fastness to sea water

Description: Method: AATCC 106, ISO 105-E02

ILT-U-1322Colour fastness to washing with soap or soap and soda

Description: Method: ISO 105 C10

ILT-U-295Colour fastness to water and perspiration

Description: Method 1 water and method 2 alkaline solution of artificial perspiration Method: SATRA TM335

ILT-U-1944Colour fastness to water spotting determination

Description: Colour fastness to water spotting Method: ISO 15700

ILT-U-1898Colour Reference determination

Description: Y, x, and y values Method: ASTM D6045, ASTM D1500

ILT-U-1898Colour Reference determination. OT

Description: Y, x, and y values Method: ASTM D6045, ASTM D1500

ILT-U-050Combustibility of covered furniture

Description: IMO A.652 (16) Annex 1, Part 8 of the Fire Test Procedures Code, Resolution MSC.61 (67) Method: IMO A.652

ILT-U-047Combustibility of Textil

Description: IMO A.652 (16) Annex 1, Part 7 of the Fire Test Procedures Code, Resolution MSC.61 (67) Method: IMO A.652

, ILT-U-2302Commercial sterility test

Description:
Standard :

ILT-U-1061COMMON CRITERIA for Information Technology Security Evaluation determination

Description: Evaluation of a software TOE for EAL2 Method: Common Criteria (CC), Common Methodology for Information Technology Security Evaluation (CEM), ISO 18045, ISO 15408-3

ILT-U-1731Composites determinations

Description: Determination of Gel Time, and determination of fiber, resin and voids Method: ASTM D3171, ASTM D3532

ILT-U-696Composition Proximal and Sodium determinations in fish

Description: Method:

ILT-U-1241Compression Testing of Metallic Materials at Room Temperature

Description: Method: ASTM E9

ILT-U-1339Compressive properties determination

Description: Compressive properties determination Method: ISO 844

ILT-U-1043Compressive properties of oriented fiber-resin composites determination

Description: Compressive properties of oriented fiber-resin composites determination Method: SACMA SRM-IR-94

ILT-U-1044Compressive properties of rigid plastics determination

Description: Compressive properties of rigid plastics determination Method: ASTM D695

ILT-U-511Compressive strength of concrete cylinders

Description: Method: ASTM C39, Nch 1037

ILT-U-962Compressive Strength of Hydraulic Cement

Description: Method: ASTM C109

ILT-U-792Concentration of linolenic acid (?3) in fish oil

Description: Linolenic acid (?3) Method:

ILT-U-1812Concrete and raw materials determinations

Description: Gradation; Specific Gravity; Organic Impurities; Water Absorption and Density; and Compression Strength Method: ASTM C642, ASTM C128, ASTM C40, ASTM C39, ASTM C136

ILT-U-1073Concrete and soil and determinations

Description: Particle Density/specific gravity for soil/aggregate; and Consolidation of soil for Soil sample; and Wear resistance of aggregate; Hardness testing in Veeb/Rockwell; and Hydraulic pressure for Concrete sample. Method:

ILT-U-1073Concrete and soil and determinations. SS

Description: Particle Density/specific gravity for soil/aggregate; and Consolidation of soil for Soil sample; and Wear resistance of aggregate; Hardness testing in Veeb/Rockwell; and Hydraulic pressure for Concrete sample. Method:

ILT-U-2201Concrete determinations

Description: Molding and curing of specimens and compression test Method: NBR 5738

ILT-U-1836Concrete determinations. 1A

Description: Normal curing of test specimens (20°C method); Determination of density of hardened concrete; Determination of compressive strength of concrete cubes; Compressive strength of test specimens; Density of hardened concrete; Shape, dimensions for specimens and moulds; and Normal curing of test specimen (20°C) Method: EN 12390-3, EN 12390-2, EN 12390-7, BS 1881, EN 12390-1

ILT-U-1452Concrete determinations. 1B

Description: Sampling of 2 cylindrical test tubes; and Facing and testing of the 2 samples at 28 days Method: EN 12390-3, EN 12390-2

ILT-U-1672Concrete determinations. 1C

Description: Casting of concrete cylinders; settlement test; and compression resistance Method: ASTM C39, ASTM C172, ASTM C143

ILT-U-1483Concrete determinations. 1D

Description: Compression resistance Method: EN 12390-3

ILT-U-1074Concrete determinations. 1E

Description: compression resistance Method: ASTM C39, Nch 1037, NBR 5739

ILT-U-957Concrete determinations. 1F

Description: Density and bulk density; Organic impurities; Sulfur trioxide; and Potassium oxide and sodium oxide by flame photometry Method: NBR NM 52, NBR NM 49, NBR NM 16, NBR NM 17

ILT-U-1312Concrete, Soil, and Aggregates determinations

Description: Concrete – Chlorides determination; Soil – pH/EC determination using Saturated paste method; and Aggregates – water soluble chlorides Method: BS 1881, EN 1744-1

ILT-U-1801Conducted Emission tests

Description: Conducted Emission tests Method: CISPR 32, EN 55032

ILT-U-1656Conductivity in water

Description: Conductivity Method:

ILT-U-190Conductivity Test – aluminum sample

Description: EN 2004-1 and ASTM E1004-09 Method: EN 2004-1, ASTM E1004

ILT-U-1653Connectors determinations

Description: Dimensional requirements; positive pressure liquid leakage; subatmospheric-pressure air leakage; stress cracking; resistance to separation from axial load; resistance to separation from unscrewing; and resistance to overriding Method: ISO 80369-7

ILT-U-1315Consistency of Paints Measuring Krebs Unit (KU) Viscosity

Description: Using a Stormer-Type Viscometer Method: ASTM D562

ILT-U-1459Consolidation Test in soil

Description: Consolidation Test Method: ASTM D2435

ILT-U-282contents in trimethylamine nitrogen (TMA-N)

Description: Ref: AOAC Oficial Methods 35.1.17 (971.14) 2000 Method: AOAC 35.1.17 (971.14) 2000

ILT-U-1509Continuous compression deformation test

Description: Aging of elastomeric parts in greenhouses with measurement of hardness variation IRHD; Aging of elastomeric parts in corn oil with IRHD hardness variation measurement; Aging of the elastomeric parts in distilled water with volume variation measurement; Aging of the elastomeric parts in acetic acid with volume variation measurement; and Permanent Compression Deformation Method: NBR 11823

ILT-U-227Continuously hot-dip coated steel flat products

Description: EN 10346 Method: EN 10346

ILT-U-1240Conventional humidity determination in soya

Description: Method:

ILT-U-1458Cooper ore determinations

Description: Method:

ILT-U-2227Cork stoppers determination

Description: Cork stoppers and articles intended to come into contact with foodstuffs. Pentachlorophenol (PCP) and Specific migration of formaldehyde in 3% acetic acid Method: Europe Council Resolution ResAP (2004)2

ILT-U-1085Corn DNA determination

Description: Presence or Absence Method:

ILT-U-1593Corrosion behavior of stainless steels

Description: Method:

ILT-U-1331Corrosion in salt spray determination

Description: Method: ASTM D1654, NBR 8094

ILT-U-296Corrosion test purpose in tents

Description: NTMD – 0026 – A1 Method: NTMD – 0026 – A1

ILT-U-296Corrosion test purpose in tents. CG

Description: NTMD – 0026 – A1 Method: NTMD – 0026 – A1

ILT-U-532Corrosion tests in artificial atmospheres — Salt spray tests

Description: Method: EN ISO 9227, ASTM B117

ILT-U-743Cosmetic Dermatological Test

Description: Acute Oral Toxicity Irritation / Corrosion Dermal Repeated. Irritation / Corrosion Eye Skin irritation / corrosion Method: APPRAISAL OF SAFETY OF CHEMICALS IN FOOD, DRUGS AND COSMETIC F.D.A, OECD 404, OECD 405, OECD 423

ILT-U-1817Cosmetic determination . 1A

Description: 1,4-dioxane in cosmetic products. Method:

ILT-U-1993Cosmetic determinations. 1B

Description: Benzoic acid; Butylparaben; Methylparaben; and Propylparaben Method:

ILT-U-981Cosmetic microbiological determinations. 1A

Description: Enterobacteria; Staphylococcus; Pseudomonas; and Aerobic mesophilic Method:

ILT-U-733Cosmetic microbiological determinations. 1B

Description: count of fungi and yeasts; Pseudomonas aeruginosa; Staphylococcus aureus; Escherichia coli; Candida albicans; Clostridium sp; and Total bacterial count Method:

ILT-U-1819Cosmetics and detergents determinations

Description: Total organic matter in the formulated detergents, and Total solids in cosmetics Method: BS 3762

ILT-U-2146Cosmetics products determinations

Description: Determination of Zirconium and Aluminum; Identification and determination of Formaldehyde; Determination of Potassium and Sodium Hydroxide; Determination of Quinine; Determination of Resorcinol (Hair lotion, Hair colors); Determination of Oxalic acid and its alkaline salts; and Determination of Silver Nitrate Method: SASO 2185

ILT-B-02Cots (cradle). Safety requirements.

Description: EN 716; NBR 15860-1 and NBR 15860-2. Method: EN 716-1, EN 716-2, NBR 15860-1, NBR 15860-2

ILT-U-1202Coumarin determination

Description: Qualitative Method:

ILT-U-1783Crease recovery angle determination

Description: Recovery form creasing of a horizontally folded specimen by measuring the angle of recovery Method: EN 22313

ILT-U-627Crude fish oil determinations

Description: Acidity; unsaponifiable matter; Index anisidine; Peroxide; Test cold; and Profile of fatty acids by GC Method: ISO 660, ISO 662, ISO 3596, AOCS Cc 11 – 53, AOCS Cd 18-90, AOCS Ce 1b-89

ILT-U-660Crush resistance in pipes and connections determination

Description: Method: ASTM D2241, ASTM D1785

ILT-U-489CTOD – Crack tip opening displacement test of metallic materials

Description: BS 7448. Method: BS 7448-1

ILT-U-1829CTOD – Crack tip opening displacement test of Welded samples

Description: Welded samples Method: BS 7448-2, ISO 15653

ILT-U-886Cu and Zn determinations

Description: Method:

ILT-U-813Cup determination

Description: Mass determination Method: NBR 14865

ILT-U-1103Cyanide in soil determination

Description: Cyanide in soil Method:

ILT-U-725Cyanides detection in water

Description: colorimetric method. Method:

ILT-U-1618Cyanobacteria determination

Description: Cyanobacteria in freshwater. Method:

ILT-U-518Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)

Description: Method: ASTM D5894

ILT-U-1272Cytotoxicity test in Suture thread

Description: Method: ISO 10993-5

ILT-U-1308Decibelmeter calibration

Description: Frequency weighting; Attenuation in and out of the passing bands; and Linearity range Method: IEC 60651, IEC 61260, IEC 60804

ILT-U-686Degree of Blistering of Paints test

Description: ASTM D714 Method: ASTM D714

ILT-U-685Degree of Rusting on Painted Steel Surfaces test

Description: Method: ASTM D610

ILT-U-1896Degrees of Protection IK

Description: Led luminaires Method: IEC 62262

ILT-S-05Degrees of protection provided by enclosures (IP Code)

Description: Method: IEC 60529

ILT-U-063Degrees of protection provided by enclosures (IP Code) and Glowing/hot-wire

Description: IEC 60529 Method: IEC 60529

ILT-U-2132Delta ferrite content determination

Description: Delta ferrite content in martensitic stainless steels Method: AMS 2315

ILT-U-754Density and moisture content in wood based panels

Description: Method: EN 323, EN 322

ILT-U-1002Density and number of rows / columns positions in knitted fabrics

Description: Method: NBR 12060, NBR 10589

ILT-U-292Density and Specific Gravity (Relative Density) of Plastics by Displacement

Description: ASTM D792 Method: ASTM D792

ILT-U-2009Density determination for outsoles

Description: Density (Method A) Method: ISO 2781

ILT-U-777Density determination in Varnish

Description: Pycnometric method Method:

ILT-U-2004Density determination of leather

Description: Density Method: ISO 2781

ILT-U-2242Density determinations

Description: Useful lime test (lime index), Loss-on-fire test (Loss on ignition), Lime reactivity test, Oxide test Method: NOM-021-SEMARNAT-2000, ASTM C127

ILT-U-406Density of the sands

Description: Net Density of the Sands; and Real Density of the Sands Method: NCh 1239

ILT-U-287Density testing on steel

Description: Method: ASTM B311, ISO 3369

ILT-U-1778Deodorant and antiperspirant determinations

Description: pH; Stability of smell; and Determination of non volatile matter Method: KS 1764

ILT-U-2138Deodorant determinations. 1A

Description: Visual Inspection; Determination of Ethanol content in spray; and Determination of formaldehyde Method: SASO 1795

ILT-U-2134Deodorant determinations. 1B

Description: Visual Inspection; Qualitative test for Formaldehyde; and Determination of delivery rate of content Method: SASO 1327

ILT-U-273Destructive tests on welds in metallic materials. Fracture tests

Description: EN 1320 and ASME IX:2010/QW182. Method: EN 1320, ASME IX / QW182, ISO 9017

ILT-U-758Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels

Description: Method: ASTM A923

ILT-U-1905Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels. ABC

Description: Method A, B and C Method: ASTM A923

ILT-U-1244Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels. C

Description: Duplex Austenitic/Ferritic Stainless Steels (Method C) Method: ASTM A923

ILT-U-975Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys

Description: ASTM G28 – method A. Method: ASTM G28

ILT-U-580Detection of Salmonella spp in mayonnaise

Description: Method: ISO 6579

ILT-U-1273Detection of the use of certain azocolorants accessible with and without extracting the fibers

Description: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene Method: ISO 14362-3, ISO 14362-1

ILT-U-1351Detergent and soap determinations

Description: Surface active agents: Determination of pH of aqueous solutions – Potentiometric method; Surface active agents. Detergents. Determination of anionic-active matter by manual or mechanical direct two-phase titration procedure; Cosmetics- determination of chloride content; Soaps. Determination of content of ethanol – insoluble matter; Soaps. Determination of moisture and volatile matter content-Oven method; and Surface active agents- Analysis of soaps – Determination of free caustic alkali. Method: ISO 456, ISO 672, ISO 673, ISO 2271, ISO 4316

ILT-U-1980Detergent determinations. 1A

Description: Chloride content; pH; Total surface active agents; Anionic active matter; Biodegradability; Phosphate content; Brightening agent8; Moisture and volatile matter; Rising property; and Metal analysis (Lead, cadmium, chromium, mercury, arsenic, nickel) Method: GSO 152

ILT-U-1773Detergent determinations. 1B

Description: pH; Moisture & Volatile matter; Presence of brightening agent; and Rinsing property Method: GSO 4316, GSO ISO 672, GSO 152

ILT-U-2156Detergents determinations. 1C

Description: Visual Inspection; Determination of total solid matter; Stability to hard water; Stability at low temperature; Cleaning Efficiency Test; Anti-microbial Activity; Pseudomonas Aeruginosa; and Escherichia coli Method: SASO 2619

ILT-U-852Determination formula milk

Description: Humidity, Ash, Protein, and Fat Method:

ILT-U-626Determination in corned beef

Description: Water activity and pH Method:

ILT-U-343Determination in corrugated cardboard

Description: Resistance to crushing Method: TAPPI 825

ILT-U-625Determination in grated cheese

Description: Water activity and pH Method:

ILT-U-037Determination in meat products

Description: Sodium nitrite. Method:

ILT-U-342Determination in paper samples

Description: Traction; resistance to Taber flexion; adhesion between layers (Scott); and resistance to the passage of Gurley air Method: TAPPI 460, TAPPI 489,TAPPI 494, TAPPI 566, TAPPI 569

ILT-U-1668Determination in Sodium Hydroxide

Description: Determination of concentration and carbonates; chlorides; and iron Method:

ILT-U-1497Determination in vinegar

Description: Sulfur anhydride; Volatile acidity; Organoleptic examination; Total sugars; Reduced dry extract; Ash; Total dry extract; Alcoholic grade; Coloring; Sulphates; and Relative density at 20º Method:

ILT-U-1017Determination of 17 ?-methyltestosterone in fish

Description: Method:

ILT-U-523Determination of 2 % Secant Modulus for Polyethylene Geomembranes

Description: Method: ASTM D5323

ILT-U-1219Determination of 2, 4, 6-trichloroanisole in wine

Description: TCA (2, 4, 6-trichloroanisole) Method:

ILT-U-1923Determination of absorption in nonwovens

Description: Absorption Method: ISO 9073-6

ILT-U-1617Determination of aflatoxin M1 in powder milk

Description: Aflatoxin M1 Method:

ILT-U-1616Determination of aflatoxins and mycotoxins

Description: Aflatoxin B1; Aflatoxin B2; Aflatoxin G1; Aflatoxin G2; Ochratoxin; Deoxynivalenol; and Zearalenone Method:

ILT-U-1605Determination of aggregate impact value and ten percent fines value (TFV)

Description: Aggregate Impact Value AIV (Dry): Aggregate Impact Value AIV (Wet); Ten Percent fine value TFV (Dry); and Ten Percent fine value TFV (Wet) Method: BS 812 Part 111, BS 812 Part 112

ILT-U-166Determination of agrochemicals

Description: Glyphosate, Carbendazim, imidacloprid, and chlorpyrifos Method:

ILT-U-1461Determination of agrochemicals in wines

Description: Captan; Folpet; Fenarimol; Cypermethrin; and Triadimefon Method:

ILT-U-796Determination of airborne acoustical noise

Description: Vacuum cleaners Method: IEC 60704-2-1

ILT-U-411Determination of antibiotics and aflatoxins in food

Description: Method:

ILT-U-1450Determination of antimony in antimony trioxide

Description: Antimony concentration – Sb2O3 Method:

ILT-U-811Determination of ash and moisture in soybean

Description: Ash and moisture Method: AOCS Ba 5a-49, AOCS Ba 2a-38

ILT-U-304Determination of ash content in thermoplastics

Description: Method: ASTM D5630

ILT-U-719Determination of ash content on PVC pipes and fittings

Description: Ash Method: ASTM D5630

ILT-U-1608Determination of bicarbonate

Description: Method:

ILT-U-231Determination of breaking strength and elongation of fabrics

Description: ASTM D5034 (NTC 754-1) Method: ASTM D5034, NTC 754-1

ILT-U-359Determination of Brookfield Viscosity and hardness shore A

Description: Hardness Shore A; and Viscosity Method: ISO 7619, ISO 2555

ILT-U-529Determination of brucellosis in bovine serum lyophilized

Description: Lyophilized Method: Lyophilized

ILT-U-814Determination of burning behaviour

Description: method A. Method: ISO 15025

ILT-U-829Determination of cadmium, lead, arsenic and mercury in water, meat and cereal

Description: Cadmium; Lead; Arsenic; and Mercury Method:

ILT-U-109Determination of caffeine, gluten and beta carotene in foods

Description: Method:

ILT-U-114Determination of calcium oxide

Description: Method:

ILT-U-804Determination of calcium, magnesium, sodium, potassium and total pollutant in biodiesel

Description: Calcium; Magnesium; Sodium; Potassium and Total pollutant Method: EN 14538, EN 12662

ILT-U-035Determination of carbon and sulphide by combustion of induction furnace and infrared detection, and X-Ray Fluorescence.

Description: ASTM E 1019 /ASTM E 1085 Method: ASTM E1019, ASTM E1085

ILT-U-867Determination of chloramphenicol in cereals

Description: Determination of chloramphenicol HPLC Method:

ILT-U-1520Determination of chlorates in water

Description: Chlorates Method:

ILT-U-1848Determination of Chloroform Soluble Extractive in Paper and Paperboard use as food contacting material

Description: Net chloroform soluble extractives for water fraction, for 8% alcohol fraction, for 50% alcohol fraction, and for n-heptane alcohol fraction Method: 21 CFR 176.170

ILT-U-1844Determination of Chloroform Soluble Extractive in Resinous and polymeric coatings use as food contacting material

Description: Simulant: Deionized Water, EtOH 8%, n-Heptane Method: 21 CFR 175.300

ILT-U-1844Determination of Chloroform Soluble Extractive in Resinous and polymeric coatings use as food contacting material. CG

Description: Simulant: Deionized Water, EtOH 8%, n-Heptane Method: 21 CFR 175.300

ILT-U-1844Determination of Chloroform Soluble Extractive in Resinous and polymeric coatings use as food contacting material.CH

Description: Simulant: Deionized Water, EtOH 8%, n-Heptane Method: 21 CFR 175.300

ILT-U-1525Determination of coating adhesion – Textile

Description: Determination of coating adhesion Method: ISO 2411

ILT-U-1274Determination of Coating Mass in zinc coatings on steel wire

Description: Method: EN 10244-2

ILT-U-840Determination of color and sulfur content (Diesel oil)

Description: Color and Sulfur content Method: ASTM D5453, ASTM D1500

ILT-U-345Determination of color fastness to light and transpiration.

Description: AATCC 15 and AATCC 16 (NTC 1479 and 772) Method: AATCC 15, AATCC 16, NTC 1479, NTC 772

ILT-U-234Determination of color fastness to rubbing

Description: Dry and wet Method: AATCC 8, NTC 786

ILT-U-399Determination of colour fastness to chlorinated pool water.

Description: ISO 105-E03 and NTC 850 Method: ISO 105-E03, NTC 850

ILT-U-398Determination of colour fastness to sea water

Description: NTC 850 Method: NTC 850

ILT-U-2094Determination of compression in concrete pavers.

Description: Compression Method: Código MINVU Nº 332-2008

ILT-U-1366Determination of Copper impurities.

Description: Determinations: Sb, Pb, Bi, Cu, Fe, As, In, Co, Zn, Ni, Al, S, Cd, Ag and others Method:

ILT-U-1196Determination of coumarin and acid Orto-coumaric

Description: Coumarin and acid Orto-coumaric by Thin Layer Chromatography (TLC). (Qualitative Test). Method:

ILT-U-409Determination of crude protein, crude fiber and ash in foods

Description: Method:

ILT-U-903Determination of cyanide and mercury in water

Description: Free cyanide; Total cyanide; WAD Cyanide; and Mercury Method:

ILT-U-1401Determination of density in paints

Description: Density (Picnometric Method) Method: ISO 2811

ILT-U-556Determination of density of plastics by the density gradient technique. Gradient Column

Description: Method: ASTM D1505

ILT-U-937Determination of Deoxynivalenol and Zearalenone in cookies

Description: Method:

ILT-U-1055Determination of depth of decarburized layer

Description: Depth of decarbuized Method: ASTM E1077

ILT-U-535Determination of dezincification resistance of copper alloys with zinc

Description: Method: ISO 6509

ILT-U-163Determination of different food components

Description: Total Glycosides; Total Flavonoids; Ruscogenin; Boldine; Cumarin; o-Cumaric Acid; Total Isoflavones; Valerenic Acid; Rutin; Quercetine; Triterpenic Glycosides (ESCIN); Total Saponins; Chlorogenic Acid; and Terpene Lactones Method:

ILT-U-030Determination of different microbiological parameters in Water. WT

Clostridium Perfringens, E.coli, Sulfite reducing Clostridia, Coliforms thermotolerant, Pseudomonas spp., Coliforms, Yeast, Mould

ILT-U-461Determination of different parameters in helmets

Description: ANSI Z89 Method: ANSI Z89

ILT-U-064Determination of different parameters in Juice

Description: °Brix (Refractometric method); Titratable acidity, as citric acid (titrimetric method); pH (potentiometric method); and C Vitamin, as ascorbic acid (capillary electrophoresis method) Method:

ILT-U-025Determination of different parameters in Natural Tuna

Description: TPC (total Place Count); Presence or ausence of: Staphylococus, E.coli, Salmonella, Sulfite reducing Clostridia, Shigella, anb Vibrio cholera; and Fluroquinolone and Florfenicol. Method:

ILT-U-1820Determination of different parameters in water, food and beverage samples

Description: Total coliforms; Parasitology – Helminth eggs. (absence or presence); and Verotoxigenic Escherichia coli Method:

ILT-U-192Determination of different parameters of Condiments.

Description: Chili Powder, Curry Powder, Coriander Powder, Garam Masala, and others Method:

Category of Schemes
ILT – Interlaboratory Test
Scroll to Top