ILT Interlaboratory Test | Proveedor de ensayos de aptitud por comparación

Plastico
Solicitar
Ensayo de aptitud Código Comentarios Norma Seleccionar
Physicochemical Tests for Plastic pharmaceutical Containers ILT-U-058 USP <661> USP 661
Thermal insulating products for building applications. Determination of deformation under specified compressive load and temperature conditions ILT-U-087 EN 1605 EN 1605
Thermal insulating products for building applications. Determination of dimensional stability ILT-U-088 EN 1603 method B2 and EN 1604 EN 1603
EN 1604
Thermal insulating products for building applications. Determination of bending behavior ILT-U-089 EN 12089 Method B EN 12089
Thermal insulating products for building applications. Determination of compression behavior ILT-U-090 EN 826 EN 826
Tensile Properties of Thin Plastic Sheeting ILT-U-253 ASTM D882 ASTM D882
Determination of Thickness of Plastic Film Test Specimens ILT-U-254 ASTM D6988 ASTM D6988
Test Method for Propagation Tear Resistance of Plastic Film ILT-U-257 ASTM D1922 ASTM E1922
Density and Specific Gravity (Relative Density) of Plastics by Displacement ILT-U-292 ASTM D792 ASTM D792
Fiber Reinforced Plastics test ILT-U-374 ISO 527-4, ISO 527-5, ISO 14125, ISO 14126, & ISO 14130. ISO 527-4
ISO 527-5
ISO 14125
ISO 14126
ISO 14130
Taber Abrasion ILT-U-487 ASTM D3389 and NCh 773/2 Of. 1992. ASTM D3389
NCh 773/2 Of. 1992.
Wetting tension test ILT-U-514 ASTM D2578
OD Test ILT-U-515 ASTM D1505
Coefficients of friction ILT-U-517 ASTM D1894
Tear-propagation resistance determination ILT-U-519 ASTM D1938
Hot seal strength determination ILT-U-520 ASTM F1921
Water vapor transmission rate determination ILT-U-521 ASTM F1249
Determination of 2 % Secant Modulus for Polyethylene Geomembranes ILT-U-523 ASTM D5323
Tensile Properties of Plastics ILT-U-550 ASTM D638
Determination of density of plastics by the density gradient technique. Gradient Column ILT-U-556 ASTM D1505
Determination of the transition temperature of polymers by differential scanning calorimetry ILT-U-557 ASTM D3418
Ash determination (ENG) ILT-U-1009 (ENG) Method A (ENG) NBR NM 84
(ENG) Impact Resistance of Plastic Film by the Free-Falling Dart Method (ENG) ILT-U-1063 (ENG) Impact resistance. (ENG) ASTM D1709
(ENG) Plastic tensile properties (ENG) ILT-U-1141 (ENG) plasticized PVC hose. ASTM D638 ASTM D638
(ENG) Polyethylene determinations (ENG) ILT-U-1161 (ENG) Melt Flow Index (MFI); density by displacement; and density by gradient technique, ASTM D1238
ASTM D792
ASTM D1505
(ENG) Plastic chairs determinations (ENG) ILT-U-1172 (ENG) Visual verification; Dimensional verification; Static load test; Impact resistance test; and Test for strength of hind legs (ENG) NBR 14776
(ENG) Plastic determinations (ENG) ILT-U-1231 (ENG) Density; Melt Flow index; Mechanical properties; Dimensions of the tubes; Resistance to internal pression; and Tear resistance (ENG) ISO 3126
(ENG) ISO 1167
(ENG) EN 388
(ENG) ISO 527
(ENG) ISO 1133-1
(ENG) ISO 1183-1
(ENG) Polyurethane Raw Materials Determination of the Isocyanate Content of Aromatic Isocyanates (ENG) ILT-U-1293 (ENG) Determination of the Isocyanate content of aromatic Isocyanates (ENG) ASTM D5155
(ENG) Thermal conductivity in polymers (ENG) ILT-U-1314 (ENG) thermal conductivity Hot Disk tps 1500 (ENG) ISO 22007-2
(ENG) Dimensions of Thermoplastic Pipe and Fittings (ENG) ILT-U-1386 (ENG) ASTM D2122
(ENG) Determination of melt flow rate (MFR) and melt volume rate (MVR) (ENG) ILT-U-1387 (ENG) ASTM D1238
(ENG) Determinations in plastic (ENG) ILT-U-1457 (ENG) compressive test and cross cut test ISO 2409
(ENG) ISO 604
(ENG) Continuous compression deformation test (ENG) ILT-U-1509 (ENG) Aging of elastomeric parts in greenhouses with measurement of hardness variation IRHD; Aging of elastomeric parts in corn oil with IRHD hardness variation measurement; Aging of the elastomeric parts in distilled water with volume variation measurement; Aging of the elastomeric parts in acetic acid with volume variation measurement; and Permanent Compression Deformation (ENG) NBR 11823
(ENG) Determining the Izod Pendulum Impact Resistance of Plastics (ENG) ILT-U-920 (ENG) ASTM D256
(ENG) Melt Flow Rates of Thermoplastics by Extrusion Plastometer (ENG) ILT-U-921 ASTM D1238
(ENG) Ash Content in Plastics (ENG) ILT-U-922 (ENG) ASTM D5630
(ENG) Fluorescent Ultraviolet (UV) Exposure of Photodegradable plastics (ENG) ILT-U-998 (ENG) Exposure of Photodegradable plastics. (ENG) ASTM D5208
(ENG) Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material (ENG) ILT-U-999 (ENG) Energy dispersive X-ray spectrometry (ENG) ASTM F2617
(ENG) Elemental analysis on polymeric materials by FTIR ILT-U-1640 (ENG) ASTM E1252
Determination of presence of Aflatoxin B1. ILT-U-338 Aflatoxin B1 by HPLC (ENG) ISO 11357
(ENG) ISO 11358
(ENG) ISO 11409
(ENG) Compressive properties of oriented fiber-resin composites determination (ENG) ILT-U-1043 (ENG) Compressive properties of oriented fiber-resin composites determination (ENG) SACMA SRM-IR-94
(ENG) Compressive properties of rigid plastics determination (ENG) ILT-U-1044 (ENG) Compressive properties of rigid plastics determination (ENG) ASTM D695
(ENG) Open-hole compressive strength of polymer matrix composite laminates determination (ENG) ILT-U-1048 (ENG) Open-hole compressive strength of polymer matrix composite laminates determination (ENG) ASTM D6484
(ENG) Tensile properties of polymer matrix composite materials (ENG) ILT-U-1265 (ENG) Tensile properties of polymer matrix composite materials (ENG) ASTM D3039
(ENG) Open-hole testing strength of polymer matrix composite determination (ENG) ILT-U-1267 (ENG) Open-hole testing strength of polymer matrix composite determination (ENG) ASTM D5799
(ENG) Compressive properties determination (ENG) ILT-U-1339 (ENG) Compressive properties determination (ENG) ISO 844
(ENG) Dimensional stability of PVC pipes (ENG) ILT-U-1342 (ENG) NBR 5687
(ENG) Short-Beam strength of polymer matrix composite materials and their laminates determination (ENG) ILT-U-1421 (ENG) Short-Beam strength of polymer matrix composite materials and their laminates determination (ENG) ASTM D2344
(ENG) In-plane shear response of polymer matrix composite materials by tensile test of a +/- 45° laminate determination (ENG) ILT-U-1423 (ENG) In-plane shear response of polymer matrix composite materials by tensile test of a +/- 45° laminate determination (ENG) ASTM D3518
(ENG) PBBS & PBDES determinations in plastic (ENG) ILT-U-158
(ENG) Exposure to Laboratory Light Sources: Xenon Arc Lamps (ENG) ILT-U-1764 (ENG) Exposure to Laboratory Light Sources: Xenon Arc Lamps (300 hours); and Color Determination (ENG) ISO 4892-2
(ENG) ASTM D6290
(ENG) Plastic determinations (ENG) ILT-U-1796 (ENG) Overall Migration from plastic using MPPO as a simulant; and BISPHENOL A (ENG) EN 1186-13
(ENG) Aging behavior. Weathering in dry, hot climate (ENG) ILT-U-1807 (ENG) Duration: 1600 hs (ENG) PV 3929
(ENG) Aging behavior. Weathering resistance, humid heat (ENG) ILT-U-1808 (ENG) Duration: 1600 hs (ENG) PV 3930
(ENG) Determination of Chloroform Soluble Extractive in Resinous and polymeric coatings use as food contacting material (ENG) ILT-U-1844 (ENG) Simulant: Deionized Water, EtOH 8%, n-Heptane (ENG) 21 CFR 175.300
(ENG) Different determinations for Olefin polymers use as food contacting material (ENG) ILT-U-1845 (ENG) Determination of Extractable Fraction for Olefin polymers (Hexane); Determination of Soluble Fraction for Olefin polymers (Xylene); Determination of Density for Olefin polymers; and Determination of Melting Point for Olefin polymers (ENG) 21 CFR 177.1520
(ENG) Different determinations for Nylon Resins use as food contacting material (ENG) ILT-U-1847 (ENG) Extractable Fractions in Nylon Resins (Deionized Water extractives, 95% ethanol extractives, Ethyl acetate extractives, and Benzene extractives); Specific Gravity in Nylon; Melting Point in Nylon Resins; and Solubility in Boiling HCl in Nylon Resins (ENG) 21 CFR 177.1500
(ENG) Specific Migration of PAH and formaldehyde and acetaldehyde (ENG) ILT-U-1849 (ENG) Specific Migration of PAH (Deionized Water, or 3% Acetic Acid, or Olive Oil) and specific migration of formaldehyde and acetaldehyde (Deionized Water, and 3% Acetic Acid) (ENG) EN 13130-1
(ENG) Plastic corrosivity (ENG) ILT-U-1912 (ENG) Weight loss in HCL 10%, Weight loss in NA OH 10%, and Weight loss in Dis.water
(ENG) Plastic FTIR Spectrophotometer (ENG) ILT-U-1913 (ENG) FTIR Spectrophotometer
(ENG) Flammability in plastics (ENG) ILT-U-1914 (ENG) Flammability (ENG) UL 94
(ENG) Heavy Metal content in plastics (ENG) ILT-U-1915 (ENG) Lead, Zinc, Cadmium, Mercury, and Arsenic
(ENG) Plastics Methodology for Assessing Polymer Photo-aging by FTIR (ENG) ILT-U-200 (ENG) 300 hrs and compare carbonyl (ENG) ISO 10640
(ENG) Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials (ENG) ILT-U-291 (ENG) Exposure to Laboratory Light Sources: Accelerated UV Ageing (340 nm (UVA) method for 300 hrs) ASTM G154
(ENG) Test of resistance to stress and thermal reversion in plastics (ENG) ILT-U-300 ASTM D638
(ENG) ISO 2525
Determination of the index of fluidity in samples plastic, according to ASTM D1238. (ENG) ILT-U-303 ASTM D1238
(ENG) Determination of ash content in thermoplastics (ENG) ILT-U-304 (ENG) ASTM D5630
(ENG) Impact test in CHARPY type, V-notch specimens (ENG) ILT-U-305 (ENG) Plastic Samples (ENG) ISO 179
(ENG) Water Absorption of Plastics (ENG) ILT-U-531 (ENG) ASTM D570
(ENG) Microbeam analysis. Analysis using energy-dispersive spectrometry (SEM/EDS) (ENG) ILT-U-636 (ENG) Qualitative analysis. The range of elements we have is from Na to U. (ENG) ISO 22309
(ENG) Time-to-Failure of Plastic Pipe Under Constant Internal Pressure (ENG) ILT-U-659 (ENG) ISO 1167
(ENG) ASTM D1598
(ENG) Crush resistance in pipes and connections determination (ENG) ILT-U-660 (ENG) ASTM D2241
(ENG) ASTM D1785
Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion (ENG) ILT-U-661
(ENG) Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings (ENG) ILT-U-662 (ENG) ISO 1167
ASTM D1599
(ENG) Tubes and connections dimensions determination (ENG) ILT-U-663 (ENG) ASTM D2122
(ENG) ISO 3126
(ENG) Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position (ENG) ILT-U-664 (ENG) ASTM D635
Resistance to impact on pipes and connections (ENG) ILT-U-665 (ENG) ASTM D224
(ENG) Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints (ENG) ILT-U-666 (ENG) Pressure test for leakproofness (ENG) ISO 3603
(ENG) Test methods for the resistance to dichloromethane at a specified temperature (DCMT) (ENG) ILT-U-667 (ENG) Unplasticized poly(vinyl chloride) (PVC-U) pipes. (ENG) EN 580
(ENG) Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals (ENG) ILT-U-668 (ENG) ASTM D3212
(ENG) Rigidity of plastic tubes determination (ENG) ILT-U-669 (ENG) ASTM D2412
(ENG) Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems (ENG) ILT-U-670 (ENG) ASTM D2846
(ENG) Vicat softening temperature determination (ENG) ILT-U-671 (ENG) ISO 2507-1
(ENG) ISO 2507-2
(ENG) Determination of resistance to external blows (ENG) ILT-U-672 (ENG) Round-the-clock method (ENG) ISO 3127
(ENG) Longitudinal reversion (ENG) ILT-U-673 (ENG) Thermal reversion (ENG) ISO 2505
Determination of ash content on PVC pipes and fittings (ENG) ILT-U-719 (ENG) Ash (ENG) ASTM D5630
(ENG) PVC tubes determinations (ENG) ILT-U-828 (ENG) Vicat softening temperature; resistance to internal hydraulic pressure sustained for a long period pipes and fittings; Resistance to internal hydraulic pressure for a short period in pipes and fittings; Dimensions in pipes and fittings; Pipes and Fittings - Flammability of Plastic; Tightness of the joint ring of elastomeric material; and Determining the rigidity of plastic tubes (ENG) ASTM D2412
(ENG) ASTM D3212
(ENG) ASTM D635
(ENG) ASTM D2122
(ENG) ASTM D1598
ASTM D1599
(ENG) ISO 2507-1
(ENG) ISO 2507-2
(ENG) Bulk density and volatile matter determinations in Polyvinyl chloride (ENG) ILT-U-911 (ENG) Bulk density and Volatile matter ASTM D2584
ASTM D1622
Polymer determinations ILT-U-2049 Tensile & Elongation ISO 188
ISO 37
Polymer determinations ILT-U-2058 Limiting Oxygen Index ISO 13501
Solicitar