ILT Interlaboratory Test | Proveedor de ensayos de aptitud por comparación

Metales
Solicitar
Ensayo de aptitud Código Comentarios Norma Seleccionar
Test pieces CHARPY type, V-notch – * ILT-E-05 ASTM E23, ISO148-1, EN 10045-1 and UNE 7 475-1 ASTM E23
ISO 148-1
EN 10045-1
(ENG) GB/T 229
(ENG) GOSTO 9454
Corrosion resistance of stainless steels ILT-E-06 ASTM A262 Practice A and E ASTM A262
Tension testing of steel ILT-E-08 ASTM E8M (ENG) ISO 6892-1
(ENG) EN 10002-1
(ENG) IRAM IAS U500 102
(ENG) GB/T 228.1
(ENG) GOST 1497
ASTM E8
(ENG) TCVN 197-1
Average grain size test on steels ILT-E-09 ASTM E112 ASTM E112
(ENG) ISO 643
Test of Salt Spray ILT-E-16 ASTM B117 ASTM B117
Evaluation of pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking ILT-E-21 NACE TM0284 NACE TM 0284
Chemical Analysis of Steel samples ILT-E-22 ASTM E1086 and ASTM E415 ASTM E415
ASTM E1086
Determining the Inclusion Content of Steel ILT-E-23 ASTM E45 ASTM E45
Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution (method A) ILT-E-27 ASTM G48 method A. ASTM G48
Test of charge to break Sling ILT-U-001 ASME B30.9:2006 ASME B30.9
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels ILT-U-018 ASTM A262 Practice A and E ASTM A262
Metallic materials — Bend test ILT-U-027 NMX-B-113 NMX-B-113
Testing Water Resistance of Coatings Using Water Fog Apparatus ILT-U-032 ASTM D1735 ASTM D1735
Determinations for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement ILT-U-033 ASTM A615 ASTM A615
Determination of carbon and sulphide by combustion of induction furnace and infrared detection, and X-Ray Fluorescence. ILT-U-035 ASTM E 1019 /ASTM E 1085 ASTM E1019
ASTM E1085
Determining the Inclusion Content of Steel ILT-U-040 ASTM E 45 ASTM E45
Determining Volume Fraction by Systematic Manual Point Count ILT-U-054 ASTM E562 ASTM E562
Chemical Analysis of Steel samples ILT-U-067 ASTM E1086 and ASTM E415 ASTM E415
ASTM E1019
Wire — Simple torsion test ILT-U-092 ISO 7800 ISO 7800
Metallic and oxide coating. Measurement of coating thickness (Microscopical method) ILT-U-101 ISO 1463 ISO 1463
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels ILT-U-102 ASTM A262 Practice A, B, C and E ASTM A262
Pending test for low alloy steel and Bar geometry measurement for low alloy steel ILT-U-104 BS EN ISO15630-1 BS EN ISO 15630-1
Pull-of test for adhesion ILT-U-106 ISO 4624 ISO 4624
Analysis of determination grain size in steel (using image analyzer software) ILT-U-107 ASTM E112 ASTM E112
Chemical analysis of metals ILT-U-1137 EN 14726
Immersion corrosion test ILT-U-118 ASTM G31 ASTM G31
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels ILT-U-124 ASTM A262 Practice B and C ASTM A262
Determination of tension steel rebar ILT-U-125 ASTM A370 ASTM A370
Silicon gravimetric analysis ILT-U-133 ASTM E350 ASTM E350
Determining the occurrence of fractures using the method DWTT ILT-U-145 ASTM E436
EN 10274
API 5L3-1996
Test Method for Evaluating the Microstructure of Graphite in Iron Castings ILT-U-154 ASTM A247 ASTM A247
Tension testing on steel ILT-U-156 ASTM E 8M ASTM E8
(ENG) ISO 6892-1
(ENG) EN 10002-1
(ENG) IRAM IAS U500 102
(ENG) GB/T 228.1
(ENG) GOST 1497
(ENG) TCVN 197-1
Analysis of determination grain size in aluminum ILT-U-157 ASTM E112 Standard ASTM E112
Tension testing – Autographic method ILT-U-165 ASTM E8/E8M clause 7.7.3 ASTM E8
ASTM E8M
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels ILT-U-171 ASTM A262 Practice E ASTM A262
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels ILT-U-172 ASTM A262 Practice B ASTM A262
Conductivity Test – aluminum sample ILT-U-190 EN 2004-1 and ASTM E1004-09 EN 2004-1
ASTM E1004
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels ILT-U-196 ASTM A262 Practice C ASTM A262
Average grain size test on cooper ILT-U-203 ISO 2624 ISO 2624
Analysis of Steel samples ILT-U-206 ASTM E1019 and ASTM E1447 ASTM E1447
(ENG) ASTM E2371
(ENG) ASTM E1409
Continuously hot-dip coated steel flat products ILT-U-227 EN 10346 EN 10346
Determination of film thickness (organic coating) ILT-U-255 EN ISO 2808 (7C and 7D method)
Analysis of determination grain size in steel ILT-U-258 ASTM E112 ASTM E112
Tensile Testing of Metallic Materials. Method of Test at Elevated Temperatures (150 °c) ILT-U-266 ISO 6892-2 ISO 6892-2
Nondestructive Measurement of Dry Film Thickness ILT-U-268 ASTM D7091 ASTM D7091
Destructive tests on welds in metallic materials. Fracture tests ILT-U-273 EN 1320 and ASME IX:2010/QW182. EN 1320
ASME IX:2010/QW182
(ENG) ISO 9017
Evaluation of pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking ILT-U-274 NACE TM0284 NACE TM 0284
Corrosion test purpose in tents ILT-U-296 NTMD – 0026 – A1 NTMD – 0026 – A1
Tension testing of steel wire ILT-U-313 ASTM E8 ASTM E8
Determination of Tin impurities. ILT-U-351 (ENG) Determinations: Sb, Pb, Bi, Cu, Fe, As, In, Co, Zn, Ni, Al, S, Cd, Ag and others
Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution ILT-U-356 (ENG) Method B ASTM G48
Pull-off test for adhesion ILT-U-383 ASTM 4541 (Method E) ASTM 4541
Analysis of determination grain size and phase balance on duplex materials ILT-U-410 ASTM E112, and ASTM E562 ASTM E112
ASTM E562
Tensile Testing of Metallic Materials. Method of Test at Elevated Temperatures (980 °c) ILT-U-421 (ENG) Method of Test at Elevated Temperatures (980 °c) ASTM E21
Viscosity determining corrosion inhibitors ILT-U-423 ASTM D2196 ASTM D2196
Steels – Determination of depth of decarburization ILT-U-443 EN ISO 3887 EN ISO 3887
Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid ILT-U-444 EN ISO 3651-2. EN ISO 3651-2
Microstructure of cast irons – Graphite classification by visual analysis ILT-U-445 EN ISO 945-1 EN ISO 945-1
Metallographic determination of the Delta ferrite content in austenitic Semi-finished products by the fusing test ILT-U-447 AVS E 63/01 A AVS E 63/01 A
Determining the relative corrosion resistance of metal samples exposed in a salt spray chamber. ILT-U-468 ASTM G85 Appendix A5. ASTM G85
measuring coatings ILT-U-486 ASTM D 7091 and NCh-1007 Of. 1989. ASTM D7091
NCh-1007 Of. 1989.
Crack tip opening displacement Test – CTOD ILT-U-489 BS 7448. BS 7448
Corrosion tests in artificial atmospheres — Salt spray tests ILT-U-532 EN ISO 9227
ASTM B117
Determination of formaldehyde in air ILT-U-535 (ENG) ISO 6509
Impact test in specimens CHARPY type, V-notch (-40 °c) ILT-U-561 (ENG) High Level enery, Srike 8mm, and Temperature -40 °c ISO 148-1
ASTM E23
(ENG) GOSTO 9454
(ENG) GB/T 229
Determination of non-metallic inclusions ILT-U-562 DIN 50602
Selenium poder determination ILT-U-586
Measuring Adhesion by Tape Test ILT-U-683 (ENG) Method B – Cross Cut Test. ASTM D3359
Degree of Rusting on Painted Steel Surfaces test ILT-U-685 ASTM D610
Degree of Blistering of Paints test ILT-U-686 (ENG) ASTM D714 ASTM D714
Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments ILT-U-687 (ENG) Time test 120 hs ASTM D1654
Bend determination ILT-U-753 Bend. ISO 7438
VDA 238-100
Nch 201
Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels ILT-U-758 ASTM A923
Determinations of pesticides in vegetables, grains, fruits and cereals ILT-U-825 (ENG) High grade Iron Ore.
Tensile Testing of Metallic Materials Method of Test at elevated temperatures (350 °C) ILT-U-845 (ENG) Method of Test at Elevated Temperatures (350 °c) ASTM E21
chemical composition of manganese steel ILT-U-870 ASTM E2209
Tension testing on steel (Flat sample) ILT-U-06 ASTM E8M (ENG) GB/T 228.1
(ENG) ISO 6892
ASTM E8
(ENG) GOST 1497
Bending test of steel ILT-U-17 ASME SECC. IX ED. 2010 ASME SECC. IX ED. 2010
(ENG) Wire determinations (ENG) ILT-U-1000 (ENG) ASTM B3
(ENG) ASTM B193
(ENG) Gold concentration (ENG) ILT-U-1007 (ENG) cupellation method.
(ENG) Measuring the corrugations by manual method (ENG) ILT-U-1011 (ENG) Clause 7 and 8 ASTM A615
(ENG) Linear-Elastic Plane-Strain Fracture Toughness K1c of Metallic Materials (ENG) ILT-U-1035 ASTM E399
(ENG) Linear-Elastic Plane-Strain Fracture Toughness KIc (ENG) ILT-U-1036 (ENG) SENB or CT (Metallic materials specimens) (ENG) ASTM E1820
(ENG) Measurement of Fatigue Crack Growth Rates (ENG) ILT-U-1037 (ENG) ASTM E647
(ENG) Hardness test on arc welded joints (ENG) ILT-U-1045 (ENG) EN ISO 9015-1
(ENG) Determination of the effective depth of hardening after nitriding (ENG) ILT-U-1046 (ENG) Clause 3. (ENG) DIN 50190
(ENG) Chemical Analysis of Steel samples (ENG) ILT-U-1050 (ENG) Vanadium and copper.
(ENG) Determination of depth of decarburized layer (ENG) ILT-U-1055 (ENG) Depth of decarbuized (ENG) ASTM E1077
(ENG) Gold and silver determination (ENG) ILT-U-1056 (ENG) Au and Ag (Atomic absorption)
(ENG) Determination of metals in minerals (ENG) ILT-U-1057 (ENG) Cu, Pb, Zn, As, Sb and Fe (Atomic Absorption)
(ENG) Nick Break Test (ENG) ILT-U-1059 (ENG) API 1104
(ENG) Tension test on aluminum (ENG) ILT-U-1066 (ENG) ASTM B557
(ENG) IS 1608
(ENG) ISO 6892
(ENG) Determination of mass of zinc coating per unit area on galvanized pipes (ENG) ILT-U-1091 (ENG) Strip and weigh method (ENG) ASTM A90
(ENG) Nickel and chrome ore determinations (ENG) ILT-U-1116
(ENG) Chemical analysis of N, H and O (ENG) ILT-U-1122 (ENG) Determination of Hydrogen; and Oxygen by Infrared detection. Determination of Nitrogen by Thermal conductivity.
(ENG) Coating mass determination (ENG) ILT-U-1138 (ENG) Hot dip galvanized coatings (ENG) ISO 1460
(ENG) Determination of resistance to humidity (ENG) ILT-U-1140 (ENG) ISO 6270-2
(ENG) Tension Testing on steel (sheet sample) (ENG) ILT-U-1176 (ENG) Ultimate tensile strength; Upper Yield strength; and Elongation in % according ASTM A370
(ENG) Analysis of concentrates of Rare earth elements (REE) in ore. (ENG) ILT-U-1178 (ENG) Rare earth elements (REE) in ore.
(ENG) Drop-Weight Test to Determine Nil-Ductility Transition Temperature (ENG) ILT-U-1220 (ENG) Ferritic Steels (ENG) ASTM E208
(ENG) Compression Testing of Metallic Materials at Room Temperature (ENG) ILT-U-1241 (ENG) ASTM E9
(ENG) Impact test in CHARPY type, V-notch specimens (ENG) ILT-U-1250 (ENG) High Level enery, Srike 8mm, and Temperature 20 °c ISO 148-1
ASTM E23
(ENG) GB/T 229
(ENG) GOSTO 9454
(ENG) Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution (method A) (ENG) ILT-U-1269 (ENG) Method A. ASTM G48
Testing Water Resistance of Coatings in 100% Relative Humidity ILT-U-484 ASTM D2247 ASTM D2247
(ENG) Chemical Analysis of Steel samples (ENG) ILT-U-1270 ASTM E1086
ASTM E415
(ENG) Determination of Coating Mass in zinc coatings on steel wire (ENG) ILT-U-1274 (ENG) EN 10244-2
(ENG) Bending welded steel sample (ENG) ILT-U-1276 (ENG) Bend (ENG) ASTM E190
ASTM A370
(ENG) ASME BPVC Section IX
(ENG) Reinforcement steel bars for mechanical properties Rm and Re determinations (ENG) ILT-U-1296 BS EN ISO 15630-1
(ENG) Welded mesh for shear force determinations (ENG) ILT-U-1297 (ENG) ISO 15630-2
(ENG) Determination of Emittance of Materials Near Room Temperature (ENG) ILT-U-1328 (ENG) Determination of Emittance of Materials Near Room. Temperature - Emissometer Model AE ASTM C1371
(ENG) Corrosion in salt spray determination (ENG) ILT-U-1331 ASTM D1654
(ENG) NBR 8094
(ENG) Surface discontinuities of bolts (ENG) ILT-U-1348 (ENG) microscopic method - requirements S1 ASTM F788
(ENG) Determination of metals in metal chips concentrates (ENG) ILT-U-1437 (ENG) metals chips concentrate (Ni, Zn, Bi, Pb)
(ENG) Impact test in CHARPY type, V-notch specimens (ENG) ILT-U-1440 (ENG) Low enery level, Srike 8mm, and Temperature 0 °c ASTM E23
(ENG) GOSTO 9454
ISO 148-1
(ENG) GB/T 229
(ENG) Tensile test determination (ENG) ILT-U-1467 (ENG) EN ISO 15630-3
(ENG) Chemical analysis of titanium samples (ENG) ILT-U-1487
(ENG) Chemical analysis of aluminum (ENG) ILT-U-1529 (ENG) Fe; Si; Zn; V; Cr; and Na
(ENG) X-Ray Fluorescence in stainless steel (ENG) ILT-U-1530 (ENG) X-Ray Fluorescence: Mn; P; Si; Cr; Ni; Mo; Cu; V; and Nb (ENG) ASTM E572
(ENG) Torsion, driving torque and pullout test on bone screws (ENG) ILT-U-1554 (ENG) Yield Torque; Maximum Torque; Breaking Angle; Insertion Torque; Removal Torque; and Maximum pullout load (ENG) ASTM F543
(ENG) Static test and fatigue in bone plates (ENG) ILT-U-1555 (ENG) ASTM F382
(ENG) SSC four point bend (ENG) ILT-U-1564 (ENG) Solution A - 720 hs (ENG) NACE TM 0316
Determination of dry thickness (ENG) ILT-U-1607 (ENG) Painted sheet sample (ENG) ASTM D5796
(ENG) Determinations in construction steel bars (ENG) ILT-U-1611 (ENG) Tensile properties; bend performance; and surface geometry measurement (ENG) BS 4449
(ENG) Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution (method C) (ENG) ILT-U-1667 (ENG) Method C. ASTM G48
(ENG) Bend testing of welds (ENG) ILT-U-1706 (ENG) AWS B4.0
(ENG) Transverse tensile test – Destructive tests on welds in metallic materials (ENG) ILT-U-1707 (ENG) Transverse tensile test (ENG) ISO 4136
(ENG) Determination of mass loss of bulk material on drying in copper and zinc concentrates (ENG) ILT-U-1751 (ENG) Determination of mass loss of bulk material on drying ISO 10251
(ENG) SSC (Sulfide stress cracking) test (ENG) ILT-U-215 (ENG) Method A – Solution A ANSI/NACE TM0177
(ENG) Impact test in CHARPY type, V-notch specimens (ENG) ILT-U-322 (ENG) Medium enery level, Srike 2mm, and Temperature 20 °c ISO 148-1
ASTM E23
(ENG) GB/T 229
(ENG) GOSTO 9454
(ENG) Hardness test on arc welded joints (ENG) ILT-U-598 (ENG) Impact (ENG) ISO 9016
(ENG) Macroscopic and microscopic examination of welds (ENG) ILT-U-605 (ENG) ISO 17639
(ENG) Bend test – Destructive test on welds in metallic materials (ENG) ILT-U-606 (ENG) ISO 5173
(ENG) Determining the mass loss and relative corrosion resistance of metal samples exposed in a salt spray chamber (CASS and NSS) (ENG) ILT-U-611 (ENG) Mass loss and relative corrosion resistance (CASS and NSS) EN ISO 9227
(ENG) SSC (Sulfide stress cracking) test (ENG) ILT-U-969 (ENG) Method A - Solution B ANSI/NACE TM0177
(ENG) Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys (ENG) ILT-U-975 (ENG) ASTM G28 - method A. ASTM G28
(ENG) Bend testing – corrugated steel bar (ENG) ILT-U-994 ASTM A615
Determination on copper cathodes ILT-U-066 BSI Method
Cooper ore determinations ILT-U-1458
Determining the size of a steel bar, steel U profiles, with taper flanges and carbon steel tubes welded ILT-U-194 (ENG) Steel bar, steel U profiles, with taper flanges and carbon steel tubes welded
(ENG) Chemical Analysis of Steel samples (ENG) ILT-U-024 (ENG) ASTM A751
(ENG) Breaking load test of slings (lifting cranes) (ENG) ILT-U-1090 (ENG) Inspection bodies ASME B30.9
(ENG) Chemical Analysis of Steel (ENG) ILT-U-1099 (ENG) Manganese determination ASTM E1086
ASTM E415
(ENG) Determination of O, N, C, S, H by LECO analysis (ENG) ILT-U-1139 ASTM E1019
(ENG) Pullout (Static) and Compression bending (Static) test (ENG) ILT-U-1232 (ENG) Pullout Static (Maximum Pullout load); and Compression Bending Static (Stiffens; Maximum Load; Displacement at ultimate load; Yield load; Displacement at yield load; Displacement at 2%; and Elastic displacement) (ENG) ASTM F1717
(ENG) ASTM F543
(ENG) Qualitative XRD examination (ENG) ILT-U-1235 (ENG) X-ray diffraction analysis and Crystallographic texture (ENG) EN 13925-2
(ENG) Detecting Detrimental Intermetallic Phase (ENG) ILT-U-1244 (ENG) Duplex Austenitic/Ferritic Stainless Steels (Method C) ASTM A923
(ENG) PENT (Pennsylvania Notch Test) test. (ENG) ILT-U-1263 (ENG) Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins (ENG) ASTM F1473
(ENG) Evaluation of pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking (ENG) ILT-U-130 (ENG) Total test pressure: 1 bar Partial pressure: 0.005 bar H2S (5 mbar) with CO2 balance Test duration: 720 hours Test solution: C NACE TM 0284
(ENG) Microetching Metals and Alloys (ENG) ILT-U-1317 (ENG) ASTM E407
(ENG) Analysis of carbon and sulfur by combustion (ENG) ILT-U-132 ASTM E1019
(ENG) Corrosion behavior of stainless steels (ENG) ILT-U-1593
Metal corrosion testing (ENG) ILT-U-1662 (ENG) 49 CFR 173.137 and described in UN Manual of Tests & Criteria, Section 37
(ENG) Zinc coating mass of flat steel determinations (ENG) ILT-U-1686 (ENG) Zinc coating mass of flat Steel (ENG) ASTM A90
(ENG) Salt Spray determinations (ENG) ILT-U-1690 (ENG) Galvanized Steel and Pre-painted Galvanized Steel, samples. (500 hours) ASTM B117
(ENG) Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (SEM/EDS) (ENG) ILT-U-1756 (ENG) Qualitative analysis. (ENG) ISO 22309
(ENG) Impact resistance determination (ENG) ILT-U-1791 (ENG) Impact resistance (ENG) ISO 21809-3
(ENG) ASTM D2794
ASTM G14, ASTM D2794
(ENG) Indentation resistance determination (ENG) ILT-U-1792 (ENG) Indentation resistance (ENG) ISO 21809-3
ASTM G17
(ENG) Cathodic disbondment determination (ENG) ILT-U-1793 (ENG) Cathodic disbondment (ENG) ISO 21809-3
(ENG) ASTM G8
(ENG) ASTM G42
(ENG) Holiday detection test (ENG) ILT-U-1794 (ENG) Holiday detection test NACE RP0188
(ENG) ASTM G62
(ENG) Resistance to stone impact (ENG) ILT-U-1805 (ENG) 18 days. Method B (ENG) ISO 20567-1
(ENG) Behavior in steam jet (ENG) ILT-U-1806 (ENG) 18 days. Method A (ENG) PV 1503
(ENG) Linear weight determination in corrugated bar (ENG) ILT-U-1814 (ENG) Clause 11 ASTM A615
(ENG) CTOD – Crack tip opening displacement test of Welded samples (ENG) ILT-U-1829 (ENG) Welded samples (ENG) BS 7448-2
(ENG) ISO 15653
(ENG) Specific migration of heavy metals in metal article (ENG) ILT-U-1850 (ENG) Simulant: Artificial Tap Water, 5 g/L Citric Acid (ENG) EN 13130-1
(ENG) Evaluation of Field Metallographic Replicas (ENG) ILT-U-1867 (ENG) Prepare specimens (Steel samples AISI 1010) for metallography, includes nital etch; Prepare replicas of specimens prepared for metallography, acetate film; Gold coated; and Digital micrographs of samples (100X magnification) (ENG) ASTM E1351
(ENG) Four-point bending test (Static) (ENG) ILT-U-1868 (ENG) Four-point bending (Static): Structural Stiffens; Maximum moment; and Yield moment (ENG) ASTM F2193
(ENG) Linear-Elastic Plane-Strain Fracture Toughness KIc (ENG) ILT-U-1891 (ENG) SENB or CT (Metallic materials specimens) ASTM E399
(ENG) Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels (ENG) ILT-U-1905 (ENG) Method A, B and C ASTM A923
(ENG) Energy dispersive x-ray microanalysis (EDX) determination (ENG) ILT-U-1908 (ENG) Energy dispersive x-ray microanalysis (EDX)
(ENG) Determining the inclusion or second-phase constituent content (ENG) ILT-U-1974 (ENG) Determining the inclusion or second-phase constituent content by automatic image analysis (ENG) ASTM E1245
(ENG) Analysis of concentrates of copper, lead and zinc (ENG) ILT-U-198
(ENG) Linear-Elastic Plane-Strain Fracture Toughness CTOD (ENG) ILT-U-1998 (ENG) SENB or CT (Metallic materials specimens) (ENG) ASTM E1820
(ENG) Resistivity of Electrical Conductor Materials (ENG) ILT-U-2131 (ENG) Resistivity (ENG) ASTM B193
(ENG) Delta ferrite content determination (ENG) ILT-U-2132 (ENG) Delta ferrite content in martensitic stainless steels (ENG) AMS 2315
(ENG) Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials (ENG) ILT-U-275 (ENG) Evaluation of coatings exposed to atmospheric corrosion
(ENG) Density testing on steel (ENG) ILT-U-287 (ENG) ASTM B311
(ENG) ISO 3369
(ENG) Exposure to Laboratory Light Sources: Accelerated UV Ageing (ENG) ILT-U-291 (ENG) Exposure to Laboratory Light Sources: Accelerated UV Ageing (340 nm (UVA) method for 300 hrs) ASTM G154
(ENG) Preparation and analysis of micro specimen for ferrite count (ENG) ILT-U-301 (ENG) Microstructure examination (ENG) ASTM E3
(ENG) ASTM E407
(ENG) Analysis of macroetching metals (ENG) ILT-U-302 (ENG) Homogeneity or Not homogeneity of steel bar sample (ENG) ASTM E340
(ENG) ASTM E381
(ENG) Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels. (ENG) ILT-U-324 (ENG) Practice C & E ASTM A262
(ENG) Analysis of concentrates of Tin & Lithium (ENG) ILT-U-360 (ENG) Tin & Lithium
(ENG) Analysis of concentrates of Manganese and Tungsten (ENG) ILT-U-363 (ENG) Manganese and Tungsten
(ENG) Chemical Analysis of Steel samples (ENG) ILT-U-371 (ENG) B, V, Cu, and Sn ASTM E415
(ENG) Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials (ENG) ILT-U-420 (ENG) Weatherometry, U.V. exposure (ENG) ASTM G155
(ENG) Determination of resistance to intergranular corrosion of stainless steels (Method B) (ENG) ILT-U-473 (ENG) Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (Method B) EN ISO 3651-2
(ENG) Gold in rocks determination (ENG) ILT-U-558 (ENG) From 8 PPB to 100 PPB and 1 PPM to 400 PPM
(ENG) Tensile testing on steel (ENG) ILT-U-620 (ENG) ASTM A706
(ENG) Microbeam analysis. Analysis using energy-dispersive spectrometry (SEM/EDS) (ENG) ILT-U-636 (ENG) Qualitative analysis. The range of elements we have is from Na to U. (ENG) ISO 22309
(ENG) Analysis of concentrates of Iron and Graphite (ENG) ILT-U-643 (ENG) Iron and Graphite
(ENG) Surface area for metal powders (BET) (ENG) ILT-U-784 (ENG) BET – 5 – Point analysis (Nitrogen Gas) (ENG) ASTM B922
(ENG) Analysis of concentrates of Uranium ore (ENG) ILT-U-859 (ENG) Uranium ore
Paints and varnishes determination ILT-U-2024 Film thickness ISO 2178
Paints and varnishes determinations ILT-U-2025 Coating Thickness Amplitude Sensitive Eddy Current (Eddy Current) Method ISO 2360
Measurement of coating thickness. ILT-U-2067 Measurement of coating thickness. X-ray spectrometric methods ISO 3497
Materials and articles in contact with foodstuffs ILT-U-2068 Dip Test for coated surface 8hrs ISO 8442-2
Materials and articles in contact with foodstuffs ILT-U-2069 Dip Test for Ferritic & Austenitic stainless steel 6hrs ISO 8442-2
Materials and articles in contact with foodstuffs ILT-U-2075 Dip Test for Martensitic stainless steel 6hrs ISO 8442-2
Mechanical properties of fasteners ILT-U-2076 Torsional test and minimum torque test ISO 898-7
Mechanical properties of fasteners made of carbon steel and alloy steel ILT-U-2080 Proof load test ISO 898-2
Metal determinations ILT-U-2089 chemical analysis in stainless steel sample by OES ASTM E1086
ASTM E1019
Measurement of coating thickness ILT-U-2102 Coating thickness in metallic (Microscopical method) ASTM B487
Jominy qualification test ILT-U-2114 Jominy qualification ISO 642
ASTM A255
Failure determination by macrographic analysis ILT-U-2115 Folds, fissures, pores, occlusions, exfoliations or any other defect Nch 1514
Solicitar