close
  • Follow us
CATEGORIESILT CODENAMESUMMARYSELECT
ILT-U-2000Abrasion resistance of soles determination

Description: Abrasion resistance Method: ISO 4649

ILT-U-442Abrasion Resistance of Textile Fabrics

Description: Martindale Abrasion Tester Method Method: ASTM D4966

ILT-U-637Abrasion test in Textile

Description: Martindale method Method: EN 13520

ILT-U-595Absorbency of Textiles

Description: Method: AATCC 79

ILT-U-1249Aircraft textile materials fire test

Description: Vertical bunsen burner test, 45º Degree bunsen burner test, Horizontal bunsen burner test, 60º Degree bunsen burner test, and Oil burner test for seats cuchions. Method: CS/FAR 25, DOT/FAA/AR-00/12 Aircraft materials fire test handbook

ILT-U-952Alkylphenol ethoxylates determination

Description: APEO Method: ISO 18254

ILT-U-2002Analysis of flex resistance determinations

Description: Flex resistance (Dry 100.000 cycles) Method: ISO 17694

ILT-U-2001Analysis of slip resistance determinations

Description: Resistance determination of footwear. Method: ISO 13287

ILT-U-2012Apparent density and mass per unit area of leathers.

Description: Apparent density and mass per unit area Method: ISO 2420

ILT-U-1715Assessment of resistance of materials to molten metal splash

Description: Assessment of resistance of materials to molten metal splash Method: ISO 9185

ILT-U-1021Azo dyes in textile

Description: Method: ISO 14362-1

ILT-U-479Breaking force and extension at break of shoe laces

Description: Dry and Wet Method: SATR TM94

ILT-U-1579Burning behavior – measurement of flame spread properties of vertically oriented

Description: Method: ISO 6941

ILT-U-983Bursting strength and bursting distension determinationin textile

Description: Bursting strength; and Bursting distension Method: ISO 13938-1

ILT-U-986Bursting Strength of Textiles

Description: bursting strength of textiles—constant-rate-of-traverse (CRT) Ball Burst Test Method: ASTM D3787

ILT-U-1577Carpets determination

Description: Determination of tuft withdrawal force Method: ISO 4919

ILT-U-195Change of colour with accelerated ageing in leather

Description: Heat aging in a stove at 60 ºc for 24 hours (Method 6A); and Heat aging and humidity in a climatic chamber at 50 ºc and 90% hr for 24 hours (Method 7A) Method: ISO 17228

ILT-U-592Chemical tests in leather

Description: pH Method: ISO 4045

ILT-U-1669Children’s clothing determinations

Description: Cords and drawstrings on children’s clothing. Method: CNS 15291 L1037

ILT-U-1651Chromium VI in leather

Description: Chromium VI Method: ISO 17075

ILT-U-587Closure strength of touch and close fasteners

Description: Peel + shear; and peel + shear – after fastener 5000 revolutions Method: SATRA TM123

ILT-U-1374Color fastness to laundering

Description: C1S & C2S Method: ISO 105-C06

ILT-U-1782Color fastness to organic solvents determination

Description: To organic solvents Method: ISO 105 X05

ILT-U-1027Color fastness to rubbing – Veslic

Description: Dry felt and wet felt Method: ISO 11640

ILT-U-045Color fastness to washing

Description: ISO 105-C06:1994 Method: ISO 105-C06

ILT-U-774Colorfastness determination in watersea

Description: Method: AATCC 106

ILT-U-169Colorfastness to Laundering: Accelerated

Description: AATCC 61 Method: AATCC 61

ILT-U-843Colour fastness determinations in textile

Description: Determinations of colour fastness to perspiration; colour fastness to rubbing; and colour fasness to hot pressing. Method: ISO 105 E04, ISO 105 X12, ISO 105 X11

ILT-U-1019Colour fastness to bleaching determination in textile

Description: colour fastness to bleaching (Hypochlorite) Method: ISO 105 N01

ILT-U-293Colour fastness to circular rubbing

Description: Dry 256 revolutions and wet 128 revolutions Method: SATRA TM8

ILT-U-1100Colour fastness to hot pressing

Description: Method: ISO 105 X11

ILT-U-638Colour fastness to rubbing determination in Textile. 1A

Description: Colour fastness to rubbing Method: EN ISO 17700 – A

ILT-U-452Colour fastness to rubbing determination in Textile. 1B

Description: Colour fastness to rubbing Method: ISO 105 X2

ILT-U-1279Colour fastness to sea water

Description: Method: AATCC 106, ISO 105-E02

ILT-U-1322Colour fastness to washing with soap or soap and soda

Description: Method: ISO 105 C10

ILT-U-295Colour fastness to water and perspiration

Description: Method 1 water and method 2 alkaline solution of artificial perspiration Method: SATRA TM335

ILT-U-1944Colour fastness to water spotting determination

Description: Colour fastness to water spotting Method: ISO 15700

ILT-U-050Combustibility of covered furniture

Description: IMO A.652 (16) Annex 1, Part 8 of the Fire Test Procedures Code, Resolution MSC.61 (67) Method: IMO A.652

ILT-U-047Combustibility of Textil

Description: IMO A.652 (16) Annex 1, Part 7 of the Fire Test Procedures Code, Resolution MSC.61 (67) Method: IMO A.652

ILT-U-1783Crease recovery angle determination

Description: Recovery form creasing of a horizontally folded specimen by measuring the angle of recovery Method: EN 22313

ILT-U-1002Density and number of rows / columns positions in knitted fabrics

Description: Method: NBR 12060, NBR 10589

ILT-U-2009Density determination for outsoles

Description: Density (Method A) Method: ISO 2781

ILT-U-2004Density determination of leather

Description: Density Method: ISO 2781

ILT-U-1273Detection of the use of certain azocolorants accessible with and without extracting the fibers

Description: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene Method: ISO 14362-3, ISO 14362-1

ILT-U-1923Determination of absorption in nonwovens

Description: Absorption Method: ISO 9073-6

ILT-U-231Determination of breaking strength and elongation of fabrics

Description: ASTM D5034 (NTC 754-1) Method: ASTM D5034, NTC 754-1

ILT-U-814Determination of burning behaviour

Description: method A. Method: ISO 15025

ILT-U-1525Determination of coating adhesion – Textile

Description: Determination of coating adhesion Method: ISO 2411

ILT-U-345Determination of color fastness to light and transpiration.

Description: AATCC 15 and AATCC 16 (NTC 1479 and 772) Method: AATCC 15, AATCC 16, NTC 1479, NTC 772

ILT-U-234Determination of color fastness to rubbing

Description: Dry and wet Method: AATCC 8, NTC 786

ILT-U-399Determination of colour fastness to chlorinated pool water.

Description: ISO 105-E03 and NTC 850 Method: ISO 105-E03, NTC 850

ILT-U-398Determination of colour fastness to sea water

Description: NTC 850 Method: NTC 850

ILT-U-453Determination of dimensional change in washing and drying

Description: ISO 5077 Method: ISO 5077

ILT-U-430Determination of dimensional stability to washing

Description: BS EN ISO 6330 Method: BS EN ISO 6330

ILT-U-1163Determination of distension and strength of surface in leather

Description: Distension and strength of surface Method: ISO 3379

ILT-U-705Determination of ethoxylated alkylphenols

Description: Method: ISO/DIS 18218-2

ILT-U-1975Determination of Extractable Metals in textile

Description: Determination of Extractable Metals (Lead (Pb), Cadmium (Cd), Mercury (Hg), Arsenic (As), Copper (Cu), Cobalt (Co), Chromium (Cr), Nickel (Ni), Antimony (Sb)) by Salivary Solution (by ICP-MS) Method: DIN 54233-4

ILT-U-170Determination of fabric propensity to surface fuzzing and to pilling

Description: Modified Martindale method Method: EN ISO 12945-2

ILT-U-1164Determination Of Flex Resistance in leather

Description: Flexometer Method Method: ISO 5402-1

ILT-U-537Determination of formaldehyde in textiles

Description: Method: VDA 275, ISO 14184-1

ILT-U-987Determination of heat transmission on exposure to flame

Description: Heat transmission Method: ISO 9151

ILT-U-1321Determination of length, width of fabric roll

Description: Method: ISO 2286-1

ILT-U-428Determination of mass per unit area of fabric

Description: ISO 3801 Method: ISO 3801

ILT-U-455Determination of mass per unit area using small samples

Description: ISO 12127 Method: ISO 12127

ILT-U-701Determination of maximum force and elongation at maximum force using the strip method

Description: Method: ISO 13934-1

ILT-T-02Determination of maximum force and elongation at maximum force using the strip method. Open

Description: ISO 13934-1 Method: ISO 13934-1

ILT-U-985Determination of maximum force to seam rupture using the grab method

Description: Maximum force to seam rupture Method: ISO 13935-2

ILT-U-965Determination of maximum force using the grab method

Description: ISO 13934-2 Method: ISO 13934-2

ILT-U-462Determination of number of threads per unit lenght

Description: BS 5441 Method: BS 5441

ILT-U-1216Determination of PCP in textile sample

Description: Textil (HPLC); and Standard solution (HPLC) Method:

ILT-U-068Determination of pH of aqueous extract

Description: ISO 3071 Method: ISO 3071

ILT-U-431Determination of pH value in fabric

Description: AATCC 81 or ISO 3071 Method: AATCC 81, ISO 3071

ILT-U-1924Determination of resistance of the upper and lower terminals

Description: Slide fasteners. Zips Method: BS 3084

ILT-U-815Determination of resistance to water penetration in textile

Description: Method: ISO 811

ILT-U-1303Determination of single-end breaking force and elongation at break

Description: Breaking force and Elongation at break (using constant rate of extension) Method: ISO 2062

ILT-U-848Determination of softness and abrasion resistance in leather.

Description: Method: ISO 20344, ISO 17235

ILT-U-230Determination of spirality after laundering

Description: Woven and knitted fabrics Method: ISO 16322-2

ILT-U-963Determination of tear force of trouser-shaped test specimens

Description: UNE EN ISO 13937-2:2001 Method: ISO 13937-2

ILT-U-424Determination of tear force wing- shaped test specimens

Description: EN ISO 13937-3 Method: EN ISO 13937-3

ILT-U-1166Determination of tear load in Leather

Description: Double edge tear Method: EN ISO 3377-2

ILT-U-1218Determination of tear resistance

Description: Method: ISO 4674-1, ISO 4674-2

ILT-U-429Determination of tearing strength

Description: BS EN ISO 13937-1 Method: BS EN ISO 13937-1

ILT-U-1083Determination of the abrasion resistance of fabrics by the Martindale method

Description: Abrasion (50000 cycles) Method: ISO 12947-2

ILT-U-826Determination of the number of rows / courses and columns in knitted fabrics

Description: Number of curses and column Method: NBR 12060

ILT-U-228Determination of the number warp yarns and weft yarns

Description: ASTM D3775 (NTC 427) Method: ASTM D3775, NTC 427

ILT-U-232Determination of the slippage resistance of yarns at a seam in woven fabrics

Description: Fixed seam opening method Method: ISO 13936-1

ILT-U-1217Determination of thickness of textiles and textile products

Description: Method: ISO 5084

ILT-U-1447Determination of volatile matter in leather

Description: Method: ISO 4684

ILT-U-678Determinations in nonwovens

Description: Determination of mass per unit area Method: ISO 9073-1, EN 29073-1

ILT-U-451Determinations of colour fastness to perspiration

Description: Colour fastness to perspiration Method: ISO 105 E04, GB/T 3922

ILT-U-229Dimensional change after washing cloth home

Description: AATCC 135 Method: AATCC 135

ILT-U-1282Dimensional stability and wash/dry cycle

Description: Method: AATCC 150

ILT-U-1323Dimensional Stability During Domestic Washing And Drying Procedures

Description: Method: SANS 11167

ILT-U-1650Disperse dyes determination

Description: Disperse dyes Method: DIN 54231

ILT-U-1815Drying Rate of Fabrics

Description: Drying Rate of Textiles at their Absorbent Capacity: Air Flow Method; and Drying Rate of Fabrics: Heated Plate Method Method: AATCC 200, AATCC 201

ILT-U-2005Electric shock resistance of leather

Description: Electric shock resistance Method: ASTM F2412

ILT-T-07Electrostatic (ESD) – Garments – Resistive Characterization

Description: ANSI/ESD STM2.1-1997 Method: ANSI/ESD STM 2.1

ILT-U-1287Emission of formaldehyde in fabrics

Description: Method: AATCC 112

ILT-U-2052ESD, Resistance to ground

Description: Footwear qualification Method: ANSI/ESD STM9.1

ILT-U-1945Extractable Metals in textiles

Description: Lead, Cadmium, Mercury, Arsenic, Copper, Cobalt, Chromium, Nickel and Antimony by ICP-MS) Method: EPA 3052

ILT-U-1025Extratible HM in textile

Extratible HM

ILT-U-1660Fabric and leather determinations

Description: Determination of thickness; Flex resistance (Dry 100.000 cycles); Flexing resistance of outsole; and Fiber Analysis: Quantitative Method: AATCC 20A, ISO 20344, ISO 17694, ISO 2589

ILT-U-1362Fabric determinations

Description: Tissue weight; Density in flat tissues; and Tensile strength and elongation of flat fabrics. Method: NBR 10591, NBR 11912, NBR 10588

ILT-U-680Failure in sewn seams determination in Textile

Description: Method: ASTM D1683

ILT-U-1121Fastness determination

Description: Colour fastness to chlorinated water; Colour fastness to sea water; and Colour fastness to water Method: ISO 105-E01, ISO 105-E02, ISO 105-E03

ILT-U-375Fiber Analysis: qualitative and quantitative determinations

Description: AATCC 20 and AATCC 20A Method: AATCC 20, AATCC 20A

ILT-U-484Flame propagation determination

Description: Flame propagation (Method 1 samples <700 g/m2, and Method 2 samples >700 g/m2) Method: NFPA 701

ILT-U-1010Flame resistance in textile

Description: Method: ASTM D6413

ILT-U-1319Flammability of clothing

Description: Method: 16 CFR 1610, 16 CFR 1615, 16 CFR 1616

ILT-U-1556Flammability of fabric sample

Description: Method: 16 CFR 1500.52, 16 CFR 1500.53, 16 CFR 1500.51, 16 CFR 1500.48, 16 CFR 1500.49

ILT-U-307Flammability of materials used in the occupant compartments of motor vehicles

Description: FMVSS 302 Method: FMVSS 302

ILT-U-1288Flammability of textile fabrics

Description: Method: ASTM D1230

ILT-U-971Flammability test with 50 washes

Description: 16 CFR 1615 Method: 16 CFR 1615

ILT-U-651Flammabilty Test

Description: Flammability Method: ISO 3795

ILT-U-639Flex resistance test in Textile

Description: Flex resistance Method: EN 13512

ILT-U-265Flexing resistance of upper materials – Bally flexometer

Description: Dry 100.000 cycles; Wet 10.000 cycles; and Cold (-5ºc) 10.000 cycles Method: SATRA TM55

ILT-U-1531Footwear determination

Description: Sole bond strength test Method: ISO 17708

ILT-U-1226Footwear determinations – Clamping strength

Description: Method: SATRA TM150, SATRA TM175, SATRA TM149

ILT-U-1227Footwear determinations – Strength measurement

Description: Method: SATRA TM113, SATRA TM180, SATRA TM53

ILT-U-1225Footwear determinations – Tear strength

Description: Method: ISO 4674-1, SATRA TM162, SATRA TM43

ILT-U-619Footwear determinations. 02

Description: Puncture resistance; Impact resistance of dropouts; Compression resistance of dropouts; Internal length of the stop; Cutting height; Corrosion resistance of metal stops Ergonomic characteristics; Tear resistance; and Seam resistance Method: ISO 17697, ISO 20344, ISO 34-1

ILT-U-306Footwear determinations. 03

Description: Breaking force of buckles (three point bending test); Strength of fastened buckles; and Hardness of rubber and plastics – durometer method (Type of durometer A or D) Method: SATRA TM141, SATRA TM151, SATRA TM205

ILT-U-267Footwear determinations. 04

Description: Tear strength (trouser leg method), and Peel strength of footwear sole bonds Method: SATRA TM30, SATRA TM411

ILT-U-1224Footwear determinations. 05

Description: Method: SATRA TM51,SATRA TM52, SATRA TM226

ILT-U-632Formaldehyde determination in Textile

Description: Formaldehyde Method: ISO 14184-1, ISO 14184-2, AATCC 112

ILT-U-1943Free formaldehyde determination

Description: Determination of the free formaldehyde in process auxiliaries Method: ISO 27587

ILT-U-1911Full Shoe Flex determination

Description: ½ pair 100.000 (cycles) Flexes Method: SATRA TM92

ILT-U-1871Furniture and fabric determinations.

Description: Cover Fabric Test; Barrier Materials Test; Resilient Filling Materials Test; General safety requirements; Stability; and Product information Method: California Technical Bulletin 117, EN 14749

ILT-U-1985Geotextile determinations

Description: Determining Apparent Opening Size of a Geotextile; Trapezoidal tear strength test; and Grab Breaking load and Elongation Method: ASTM D4533, ASTM D4632, ASTM D4751

ILT-U-2282Geotextile determinations

Weight, Width, Thickness, Wide-Width Tensile, Trapezoidal Tear Strength, Puncture Strength, CBR Puncture

ILT-U-2315Geotextile determinations

Flexible sheets for waterproofing. Determination of tensile properties, Resistance to tearing (nail shank), and Tensile properties of Plastic and rubber sheets for roof waterproofing

ILT-U-2316Geotextile determinations

Flexible sheets for waterproofing. Determination of thickness and mass per unit area

ILT-U-1984Geotextile determinations. 01

Description: Determination of water permeability test; and Characteristic opening size (AOS) Test Method: ISO 12956, ISO 11058

ILT-U-052Geotextile determinations. 02

Description: Tensile Properties; Trapezoid Tearing Strength; Grab Breaking Load and Elongation; and Index Puncture Resistance Method: ASTM D4833, ASTM D4533, ASTM D4632, ASTM D4595

ILT-U-1343Geotextile determinations. 03

Description: Method: ISO 12236, ISO 10319, ISO 25619

ILT-U-446Geotextile determinations. 04

Description: Tensile Properties; Trapezoid Tearing Strength; Static Puncture Strength; and Grab Breaking Load and Elongation Method: ASTM D4632, ASTM D4533, ASTM D4595, ASTM D6241

, , ILT-U-1550Gowns determinations.

Description: Synthetic Blood Penetration Method: ISO 16603

ILT-U-2006Hardness determination in leather

Description: Hardness (Type A or Type D) Method: ISO 868

ILT-U-062Heavy metals, Disperse dyes, Organo tins and Pthalates in polymers in Textiles

Description: Heavy metals; Disperse dyes; Organo tins; and Pthalates in polymers Method: ISO 105 E04, DIN 53316, ISO 17353, ASTM D3465, CPSC-CH-C1001-09

ILT-U-1610Heel fatigue resistance

Description: Heel fatigue resistance (2000 cycles) Method: ISO 19956

ILT-U-1285Hydraulic Bursting Strength of Textile Fabrics-Diaphragm Bursting Strength Tester Method

Description: Burst resistance Method: ASTM D3786

ILT-U-294Lateral impact test for shoe heels

Description: Method: SATRA TM20

ILT-U-1368Lead determination in leather

Description: Method: ISO 17072-2

ILT-U-631Lead determination in Textile

Description: Lead Method: CPSC-CH-E-1002-08.1, CPSC-CH-E-1003-09.1, CPSC-CH-E-1001-08.1

ILT-U-1549Leather – Chemical determinations

Description: pH; Pb, Co, Cr and Ni; Chromium VI; and formaldehyde content Method: ISO 17075, ISO 17072-2, ISO 4045, ISO 17226-1, ISO 17072-1

ILT-U-1162Leather – Physical and mechanical tests – Determination of tear load

Description: Single edge tear resistance Method: ISO 3377-1

ILT-U-1408Leather and textile determinations. 1A

Description: Single edge tear; Double edge tear – Baumann; Vamp flex; Determination of the abrasion resistance of fabrics by the Martindale method (50000 cycles); and pH of textiles Method: ISO 12947-2, SATRA TM25, ISO 3377-1, ISO 3071, ISO 5402-2

ILT-U-1352Leather and textile determinations. 1B

Description: C/F to Rubbing (Veslic); C/F to Rubbing (circular) Dry: 256 revolutions; C/F to Rubbing (circular) wet: 128 revolutions; vamp Flex test (Room temperature. Dry: 100.000 cycles); vamp Flex test (Room temperature. wet: 100.000 cycles); Heel fatigue for shoe heels (20.000 cycles); Thickness of leather; Color fastness to water (method 1); and Color fastness to perspiration (method 2, alkaline solution) Method: ISO 5402-1, ISO 2589, ISO 11640

ILT-U-1417Leather determination

Description: Identification of leather with microscopy Method: ISO 17131

ILT-U-1594Leather determinations. 01

Description: Resistance to water penetration Maeser, and Abrasion Resistance Method: ISO 4649, ASTM D2099

ILT-U-1906Leather determinations. 02

Description: Paints and Varnishes. Cross-Cut Test; Chromium(VI); Colour fastness to cycles of to-and-fro rubbing; and Detrmination of 4-AMINOAZOBENZENE Method: ISO 2409, ISO 11640, ISO 17075, ISO 17234-2

ILT-U-1857Leather determinations. 03

Description: Determination of the total metal content in leather; Determination of the total metal content in leather; tear strength of leather using a double edged tear; Behaviour of the surface of a leather on rubbing with a wool felt; Leather identification by microscopy; and Determination of the thickness of the surface coating Method: ISO 17186, ISO 17131, ISO 11640, EN ISO 3377-2, ISO 17072-1, ISO 17072-2

ILT-U-1837Leather determinations. 04

Description: Impact from above with high energy droplets (Rain Tower) Method: EN 14360

ILT-U-733Leather determinations. 05

Description: Outsole flex resistance; Abrasion resistance test; PH Content; Metallic accessories Corrosion resistance; and Color fastness Rubbing test Method: AATCC 116, ISO 20344, ISO 4045, ISO 20871, ISO 22775, ISO 17707

ILT-U-783Leather determinations. 06

Description: Preparation of samples for chemical tests; Determination of volatile matters; Determination of pH; Method of determination of sulphated total ash and sulphated ash of insoluble in water. Method of determination of soluble materials in dichloromethane or other suitable solvents; Method of determination of soluble materials in dichloromethane or other suitable solvents; and Determination of the chromium oxide content of leather and its quantification by atomic absorption spectrometry Method: ISO 4045, ISO 4684, IRAM 8503, NTE INEN 1055, NTE INEN 1063, ISO 4044, ISO 5398-3

ILT-U-728Leather determinations. 07

Description: Thickness determination; Determination of tensile strength and percentage elongation; Determination of the resistance to tearing by the method of two edges on leathers; Tongue method for determining tear strength; and Determination of abrasion resistance by rotating drum device Method: ISO 2589, ISO 3376, ISO 3377-2, ISO 3377-1, ISO 4649

ILT-U-732Leather determinations. 08

Description: Slip Resistance test; Shoe peeling strength Test; Perspiration resistance test; and Water absorption & desorption test Method: ISO 5404, ISO 22649, ISO 22652, SATRA TM404, ISO 13287

ILT-U-073Leather determinations. 09

Description: pH; Colour fastness to perspiration; and Leather Chromium VI Method: ISO 17075, ISO 105 E04, ISO 4045

ILT-U-1681Leather determinations. 10

Description: Tear strength (Double edge); tensile strength & extension; dynamic water resistance by Maeser tester; chromic oxide content; chromium (IV) content; and pH Method: ISO 4045, ISO 17075, ISO 3377-2, ISO 3376, ISO 5403-2, ISO 5398-1

ILT-U-1630Leather determinations. 11

Description: Determination of thickness; density; determination of tear load; flex resistance; penetration resistance of inserts; outsole abrasion resistance; impact resistance; effect of high temperature for non-metals toecaps; flexing resistance of outsole; and electric shock resistance. Method: ISO 2589, ISO 2781, ISO 3377-2, ISO 20344, ISO 17694, ASTM F2412

ILT-U-1289Leather determinations. 12

Description: Azo Dyes; and Pentachlorophenol Method: ISO 17234-1, ISO 17070, ISO 17234-2

ILT-U-554Leather determinations. 13

Description: Chromic Oxide in leather; Total Lead; and Chromium and Aluminum Method: ISO 5398-1, EN 71-3, CPSC-CH-E1002-08.3

ILT-U-179Leather determinations. 14

Description: pH; Cr VI; Formaldehyde; Phthalates; Heavy metals; and Organo tin Method: ISO 4045, ISO 17075, ISO/TS 17226-2, ISO/TS 16181, ISO 17072-2, EN 14602, ISO/TS 16179, HAP ZEK 01.4-08

ILT-U-1284Light fastness and evaluation of aging

Description: Method 3 Method: AATCC 16

ILT-U-1120Light fastness determination

Description: Determination (as bright+colour) moisturized sweat Method: ISO 105-B07

ILT-U-1129Light fastness determination. 01

Description: Determination (as bright+colour) Method: ISO 105-B10

ILT-U-1118Light fastness determination. 02

Description: Determination (as bright+colour) Method: ISO 105-B02

ILT-U-1119Light fastness determination. 03

Description: Set 3 Method 4 – 320h Method: ISO 105-B06

ILT-U-2017Linear density determination in textiles

Description: Linear density Method: ISO 1973

ILT-U-2171Mask determinations

Description: Seam Strength (Per Seam Type) Method: EN 14325, EN 13935-2

ILT-U-2168Mask determinations. 01

Description: Resistance to Dry Microbial Penetration Method: ISO 22612

ILT-U-2167Mask determinations. 02

Description: Resistance to Wet Bacterial Penetration Method: ISO 22610

ILT-U-677Mass Per Unit Area (Weight) of Fabric

Description: Method: ASTM D3776

ILT-U-2015Mass per unit area determinations in geotextiles

Description: Mass per unit area Method: ASTM D5261

ILT-U-2010Matter soluble in dichloromethane and free fatty acid content determination for leathers.

Description: Matter soluble in dichloromethane and free fatty acid content Method: ISO 4048

ILT-U-964Measurement of thermal and water-vapour resistance under steady-state conditions in textile

Description: UNE – EN 31092:1996 Method: UNE – EN 31092

ILT-U-426Mechanical and physical tests in leather

Description: Tensile strength and percentage elongation; tear load; Water vapour permeability and Water vapour absorption. Method: ISO 17229, ISO 14268, ISO 3377-2, ISO 3376

ILT-U-471Moulded plastics footwear

Description: Lined or unlined polyurethane boots for general industrial use. Anex C (-5ºC x 150.000 cycles); and Lined or unlined poly(vinyl chloride) boots for general industrial use. Anex C (-5ºC x 150.000 cycles) Method: ISO 5423, ISO 4643

ILT-U-613Non woven geotextile determinations

Description: Mass per unit area; determination of thickness at 2kpa presser; and static puncture test (CBR Test) Method: ISO 9864, ISO 9863-1, ISO 12236

ILT-U-695Number of filaments of a thread

Description: In house methodology Method:

ILT-U-452Odors determination

Description: SNV 195 651 Method: Oeko-Tex 201 M-16

ILT-U-464Organotin compounds determination

Description: ISO 16179 Method: ISO 16179

ILT-U-1003Parts Sizing determination

Description: Method: NBR 12071

ILT-U-633Phthalates content determination in Textile

Description: Phthalates content Method: ISO 14362-1, ISO 17234-1

ILT-U-1022Phthalates in polymers

Description: Method: CPSC-CH-C1001-09.3

ILT-U-714Physical determinations in leather

Description: Thickness; and Tensile strength and elongation Method: ISO 2589, ISO 3376

ILT-U-235Pilling Resistance of Textile Fabrics

Description: ASTM D3512 (NTC 2051-2) Method: ASTM D3512, NTC 2051-2

ILT-U-1928Polycyclic aromatic hydrocarbons (PAH) determination

Description: PAH in footwear materials (by GC-MS ) Method: ISO/TS 16190

ILT-U-1790Preservatives determination in leather

Description: Preservatives Method: EN 71-9

, ILT-U-2280Protective clothing determination

Protective clothing against pesticide

ILT-U-1717Protective clothing determinations

Description: Puncture resistance; tear resistance; color measurement in new state; color measurement after exposure to light; determination of contact heat transmission through protective clothing or constituent materials; oil repellency-Hydrocarbon resistance test ; determination of resistance to damage by flexing method C: Crumple flex; abrasion resistance, Martindale Method: ISO 5740, ISO 7854,ISO 12127, ISO 14419, EN 863, ISO 9173-4, ISO 20471

ILT-U-1004Qualitative and quantitative analysis in textile

Description: Method: NBR 13538, NBR 11914

ILT-U-1298Qualitative and quantitative analysis of fibers

Description: Method: ISO 1833

ILT-U-388Quantitative analysis of fibers. Textile

Description: NTC 481. Method: NTC 481

ILT-U-226Quantitative Analysis of Textiles

Description: ASTM D629 Method: ASTM D629

ILT-U-1316Quantitative chemical analysis

Description: Separation of fibers Method: ISO 1833-3, ISO 1833-11, ISO 1833-10, ISO 1833-12, ISO 1833-13, ISO 1833-14, ISO 1833-16, ISO 1833-15, ISO 1833-17, ISO 1833-1, ISO 1833-18, ISO 1833-19, ISO 1833-20, ISO 1833-23, ISO 1833-22, ISO 1833-21, ISO 1833-24, ISO 1833-4, ISO 1833-5, ISO 1833-6, ISO 1833-7, ISO 1833-8, ISO 1833-9

ILT-U-1528Quantitative chemical analysis in fabric sample

Description: Mass fraction of polyester fiber mixed with cotton; Mass fraction of wool fiber in a two-component and pure-wool mixture; and Mass fraction of viscose fiber Method: GB/T 2910.14, GB/T 2910.8

ILT-U-590Quantitative chemical analysis in textiles

Description: Mixtures of acetate and certain other fibres (method using acetone) Method: ISO 1833-3

ILT-U-454Quantitative chemical analysis in textiles. 01

Description: Ternary fiber mixtures Method: ISO 1833-2

ILT-U-329Quantitative chemical analysis in textiles. 02

Description: ISO 1833 Method: ISO 1833-1 (annex B).

ILT-U-1716Resistance to water penetration determination

Description: Resistance to water penetration- after pretreatment-flexing; and resistance to water penetration- after pretreatment-influence of fuel and oil Method: EN 343

ILT-U-1838Respiratory protective devices

Description: Conditioning; Visual inspection; Inflammability; Penetration of filter material; Carbon dioxide content in the inhalation air; and Respiration resistance Method: EN 149

ILT-U-478Rubber products determinations

Description: Chemical Analysis Method: ASTM D297

ILT-U-1877Safety shoes determinations

Description: Impact resistance; Slip Resistance; Thermal insulation; Electrical resistance; Hydrolysis; and Resistance to electrical voltage (Withstand test voltage) Method: EN 50321, ISO 20344

ILT-U-2013Seam strength determination for footwear sample

Description: Seam strength Method: ISO 17697

ILT-U-915Shoe lace determinations

Description: Knot slippage test; Abrasion resistance (method 1 abrasion cycles 20.000); and Shoe lace to shoe lace and shoe lace to lace carrier abrasion (method 1 abrasion cycles 20.000) Method: SATRA TM154, SATRA TM195, ISO 22774

ILT-U-389Skewness Change in Fabric and Garment Twist.

Description: Resulting from Automatic Home Laundering Method: NTC 5121, AATCC 179

ILT-U-1926Slide fasteners

Description: Resistance of slide fasteners Method: DIN 3419-1

ILT-U-908Smoothness appearance of fabrics after cleansing

Description: Method: ISO 7768

ILT-U-1574Solar UV protective properties in textile

Description: Method: EN 13758-1

ILT-U-1281Solidity of dyes to sweat

Description: Method: AATCC 15

ILT-U-2011Sulphated total ash and sulphated water-insoluble ash determination for leathers

Description: Sulphated total ash and sulphated water-insoluble ash Method: ISO 4047

ILT-U-2196Surface active agents determinations

Description: Colour measurement (intrinsic yellowing, greying, whiteness); Tensile strength; Cotton fluidity; and Ash content Method: AS/NZS 4146, ISO 4312

ILT-U-078Suture thread determinations

Description: Suture diameter determination test; Tensile Test; and Swage Test Method: NBR 13904

ILT-U-487Taber Abrasion. OT

Description: ASTM D3389 and NCh 773/2 Of. 1992. Method: ASTM D3389, NCh 773/2 Of. 1992.

ILT-U-168Tear strength and breaking strength and elongation determinations

Description: ASTM D 1424 Method: ASTM D1424, ASTM D5034

ILT-U-1286Tearing strength of fabrics by tongue

Description: Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine) Method: ASTM D2261

ILT-U-269Tensile and elongation of yarn

Tensile and elongation

ILT-U-2007Tensile strength and elongation for outsoles

Description: Tensile strength and elongation Method: EN 12803

ILT-U-1026Tensile Strength and elongation in leather

Description: Method: ISO 3376

ILT-U-640Tensile strength determination in Textile

Description: Tensile strength Method: EN 13522

ILT-U-1927Tensile strength of zip fasteners

Description: Annex B, D, E, G, I, J, and H Method: EN 16732

ILT-U-289Test for adhesion of finish in leather

Description: Method: ISO 11644

ILT-U-397Test for colour fasness to hot pressing.

Description: ISO 105 – X 11 and NTC 766. Method: NTC 766, ISO 105 – X 11

ILT-U-589Test for colour fastness to rubbing

Description: Method: ISO 105 X12, GB/T 3920

ILT-U-1318Test for Dimensional Change of Knit Cotton Fabric

Description: Method: ASTM D1231

ILT-U-348Test Method for Linear Density of Yarn (Yarn Number)

Description: ASTM D1907 (NTC 842) Method: ASTM D1907, NTC 842

ILT-U-347Test Method for Tearing Strength of Fabrics

Description: Falling-Pendulum (Elmendorf-Type) Apparatus Method: ASTM D1424, NTC 313-2

ILT-U-396Test method for tensile properties of yarns

Description: Sinlge-strand method Method: ASTM D2256, NTC 386

ILT-U-225Test Method for Width of Textile Fabric

Description: ASTM D3774 (NTC 228) Method: ASTM D3774, NTC 228

ILT-U-1619Test methods for footwear

Description: Specific ergonomic features; upper/outsole and sole interlayer bond strength; Sole interlayer bond strength; internal toecap length; impact resistance; compression resistance; Behaviour of toecaps clase I; Behaviour of inserts clase I; Behaviour of toecaps clase II; Behaviour of inserts clase II; Behaviour of non-metalic toecaps; Behaviour of non-metalic inserts; leakproofness; Dimensional conformity of inserts; Penetration resistance of the sole; Flex resistance of penetration -resistant insert; Slip resistance-SRA; Slip resistance-SRB; Slip resistance-SRC; Insulation against heat (150°C); Insulation against heat (250°C); Energy absorption of the seat region; Resistance to water for whole footwear; Thickness of upper; The height of the upper; Tear strength of the upper; Tear strength of the lining; Tear strength of the tongue; Tensile properties of the upper; Upper flexing resistance (rubber); Upper flexing resistance (polymer); Water vapour permeability; Water vapour coefficient; Ph value; Hydrolysis of upper; Chromium VI content; Abrasion resistance of lining DRY25600 WET 12800; Abrasion resistance of lining DRY51200 WET 25600;Abrasion resistance of lining DRY25600 WET 12800; Water penetration and water absorption for upper; Insole thickness; Water absorption and desorption of insole; Water absorption and desorption of insock; Outsole thickness; Tear strength of outsole; Outsole abrasion resistance; Flexing resistance of outsole; Hydrolysis of outsole; Fuel oil; Flexing resistance after fuel oil; Hot contact Method: ISO 20344

ILT-U-1165Tests for colour fastness in leather

Description: Colour fastness to migration into polymeric material Method: ISO 15701

ILT-U-393Tests for colour fastness to drycleaning

Description: EN ISO 105 D01 Method: ISO 105 D 01, AATCC 132

ILT-U-1258Tests for colour fastness. General principles for measurement of surface colour in fabrics

Description: Chromaticity coordinates measurement Method: ISO 105-J01

ILT-U-788Textil determinations

Description: Water Permeability of Geotextiles; and Index Puncture Resistance of Geomembranes and Related Products Method: ASTM D4833, ASTM D4491

ILT-U-787Textil determinations. 01

Description: Linear Density of Yarn ; Mass Per Unit Area (Weight); and Mass per Unit Area of Geotextiles Method: ASTM D5261, ASTM D3776, ASTM D1907

ILT-U-786Textil determinations. 02

Description: Breaking Force and Elongation Method: ASTM D5034,ASTM D5035

ILT-U-785Textil determinations. 03

Description: Width and length, Apparent Opening Size, and Nominal Thickness Method: ASTM D3374, ASTM D4751, ASTM D5199

ILT-U-1881Textile (parachutes) determinations

Description: Flammability Test; Trapezoid Tearing Strength of Geotextiles; Conditioning (2 days @ 21C, 65% RH); and Strap strength test Method: PIA 4108E, PIA 502, PIA 504a, ASTM D6413, ASTM D4533, ASTM D6775

ILT-U-1730Textile and leather determinations

Description: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene; detection of the use of certain azo colorants accessible with and without extracting the fibres; determination of certain aromatic amines derived from azo colorants; chemical determination of chromium(VI) content in leather; and colour fastness to cycles of to-and-fro rubbing Method: ISO 11640, ISO 17075, ISO 14362-3, ISO 14362-1,ISO 17234-1

ILT-U-1729Textile and leather determinations. 01

Description: Determination of resistance to water penetration. Hydrostatic pressure test; determination of flex resistance; determination of pH; determination of fabric propensity to surface fuzzing and to pilling – pilling box method; calculation of colour differences; general principles for measurement of surface colour Method: ISO 105 J03, ISO 105-J01, ISO 4045, EN ISO 12945-1, ISO 5402-1, EN 20811

ILT-U-1546Textile determination – Color fastness of articles for common use (with artificial saliva)

Description: Determination of the color fastness of articles for common use Part 1 test with artificial Saliva Method: DIN 53160

ILT-U-1507Textile determination, 33

Description: Determination of mass per unit length and mass per unit area (method 5); Determination of maximum force and elongation at maximum force using the strip method; and Burning behaviour — Determination of ease of ignition of vertically oriented specimens Method: ISO 13934-1, ISO 6940, ISO 3801

ILT-U-2222Textile determination. 01

Description: Flammability of products subjected to direct impingement of flame. single-flame Method: ISO 11925-2

ILT-U-2221Textile determination. 02

Description: Colour fastness to spotting – acid Method: ISO 105 E05

ILT-U-2220Textile determination. 03

Description: Colour fastness to bleaching – peroxide Method: ISO 105 N02

ILT-U-2219Textile determination. 04

Description: Colour fastness to mercerizing Method: ISO 105 X04

ILT-U-2218Textile determination. 05

Description: Colour fastness to hot water Method: ISO 105 E08

ILT-U-2217Textile determination. 06

Description: Colour fastness to domestic and commercial laundering – Oxidative bleach (using a non-phosphate reference detergent) Method: ISO 105 C09

ILT-U-2216Textile determination. 07

Description: Detection and determination of photochromism Method: ISO 105 B05

ILT-U-2215Textile determination. 08

Description: Grey scale for assessing change in colour and Grey scale for assessing staining Method: EN 20105-A02, EN 20105-A03

ILT-U-2214Textile determination. 09

Description: Colour fastness to organic solvents Method: ISO 11643

ILT-U-2212Textile determination. 10

Description: Protective clothing – protection against heat and flames – limited flame spreading materials, material assemblies and clothing Method: ISO 14116

ILT-U-077Textile determination. 11

Description: Kawabata Evaluation System (KES). Evaluation of the touch of the Tissues. Total Hand Value (Tensile, Bending, Shear, Compression, Surface, Thickness, Weight) Method: Kawabata Evaluation System (KES)

ILT-U-1956Textile determination. 12

Description: Heat transmission on exposure to flame Method: EN 367

ILT-U-1958Textile determination. 13

Description: Retroreflection geometry (after washing and flammability) Method: ISO 20471

ILT-U-1957Textile determination. 14

Description: Resistance of materials to penetration by liquids Method: ISO 6530

ILT-U-1932Textile determination. 15

Description: Crease Recovery Angle Method: ISO 2313

ILT-U-1933Textile determination. 16

Description: Abrasion resistance Method: EN 530

ILT-U-1934Textile determination. 17

Description: component safety determination: Pressure springs and the like; Traction Test; and Wash Test (Anexe B and C) Method: CEN/TR 16792

ILT-U-1935Textile determination. 18

Description: Puncture resistance Method: EN 863

ILT-U-1936Textile determination. 19

Description: Retroreflection Method: CIE 54

ILT-U-1937Textile determination. 20

Description: Flexural damage resistance (Matia Method A), and Flexural damage resistance (Crumple/Flex Method C) Method: ISO 7854

ILT-U-1938Textile determination. 21

Description: Abrasion resistance (martindale) Method: ISO 5470-2

ILT-U-1939Textile determination. 22

Description: Dimensional stability to cold water immersion Method: ISO 7771

ILT-U-1940Textile determination. 23

Description: Yarn contraction in a fabric Method: ISO 7211-3

ILT-U-1941Textile determination. 24

Description: Flow Method: ISO 7211-1

ILT-U-1942Textile determination. 25

Description: Oil repellency Method: ISO 14419

ILT-U-1931Textile determination. 26

Description: Convective heat resistance Method: ISO 17493

ILT-U-1930Textile determination. 27

Description: Average fiber diameter (projection microscope method). Method: ISO 137

ILT-U-1925Textile determination. 28

Description: Colour fastness to water Method: ISO 11642

ILT-U-297Textile determination. 29

Description: Colour Fastness. Assessment Of Migration Of Textile Colours Into Polyvinyl Chloride Coatings Method: ISO 105 X10

ILT-U-1747Textile determination. 30

Description: Resistance to abrasion with change of aspect and mass loss after abrasion Method: ASTM D3389

ILT-U-1117Textile determination. 31

Description: Wrinkle Recovery of Woven Fabrics: Recovery Angle Method: AATCC 66

ILT-U-501Textile determination. 32

Description: Determination of Mass per Unit Area (Gram per square meter); Fiber Content (Polyester% & Cotton %); Threads per Unit Length (Woven fabric Construction); Determination of Dimensional stability to washing (Shrinkage); Tensile strength (Grab Method); Counts of Yarn (Woven fabric); Determination of pH of water extract from wet processed textile; and Soil Release (Oil Stain Release Method) Method: ASTM D5034, ASTM D3775, ASTM D3776, AATCC 135, AATCC 20A, AATCC 20, AATCC 130, ISO 7211-5

ILT-U-2223Textile determination. 35

Description: Burning – Flame of spread of vertically oriented specimens and Ignitability of vertically oriented specimens Method: EN 1624, EN 1625

ILT-U-2246Textile determination. 36

Description: Test Determination of wrinkle recoverability, recovery angle, and Test color fastness to water Method: ASTM D2212, ASTM D2210

ILT-U-1633Textile determination. 37

Description: Determination of thickness; Determination of tensile strength and percentage extension; Determination of tear load – Single edge tear; Determination of flex resistance – Flexometer method; Determination of distension and strength of surface (Ball burst method); Determination of Ph; Tests for colour fastness – Colour fastness to water; Tests for colour fastness – Colour fastness to migration into polymeric material; Determination of the abrasion resistance of fabrics by the Martindale method – Determination of specimen breakdown; Tests for colour fastness- Colour fastness to cycles of to-and-fro rubbing-Dry-Wet: Tests for colour fastness- Colour fastness to cycles of to-and-fro rubbing-Sweat: and Determination of volatile matter Method: ISO 4684, ISO 11640,ISO 12947-2, ISO 15701, ISO 4045, ISO 5402-1, ISO 3379, ISO 3376, ISO 2589, ISO 11642, ISO 11641

ILT-U-2109Textile determination. 38

Description: Colorfastness to Chlorine Bleach, and Non-Chlorine Bleach Method: AATCC TS 001

ILT-U-2110Textile determination. 39

Description: Stretch and Recovery Method: ASTM D3107

ILT-U-2111Textile determination. 40

Description: Weather Resistance of Textiles (Xenon Arc Lamp Exposure) Method: AATCC 169

ILT-U-477Textile determination. 41

Description: Colour fastness to saliva Method: GB/T 18886

ILT-U-476Textile determination. 42

Description: Colour fastness to saliva Method: ISO 20701

ILT-U-475Textile determination. 43

Description: Colour fastness to Saliva & Perspiration Method: Oeko-Tex 201 M-9-0

ILT-U-1804Textile determination. 44

Description: Odors determination Method: GB 18401

ILT-U-1543Textile determinations – Abrasion resistance of fabrics by the martindale method

Description: Abrasion resistance of fabrics by the martindale method -Part 2 specimen breakdown; Part 3 mass loss; and Part 4 appearance change Method: ISO 12947-2, ISO 12947-3, ISO 12947-4

ILT-U-1539Textile determinations – Color fastness to water

Description: Color fastness to water Method: ISO 105-E01, AATCC 107, GB/T 5713

ILT-U-1623Textile determinations – Colorfastness

Description: Colorfastness to Perspiration and Light; drycleaning; heat: hot pressing; water: chlorinated pool; dye transfer in storage; fabric-to fabric; powdered non-chlorine bleach in home laundering; sodium hypchlorite bleach in home laundering; acids and alkalis; crocking. crockmeter method; perspiration; light: xenon-arc; laundering: accelerated; bleaching with hydrogen peroxide; water spotting; water sea; water; ozone in the atmosphere under low humidities; crocking: rotary vertical crockmeter; heat: dry (excluding pressing) Method: AATCC 61, AATCC 6, AATCC 116, AATCC 106, AATCC 8, AATCC 188, AATCC 15, AATCC 101, AATCC 104, AATCC 107, AATCC 109, AATCC 172, AATCC 117, AATCC 125, AATCC 132, AATCC 163, AATCC 133

ILT-U-1540Textile determinations – Colour fastness to rubbing

Description: Test for colour fastness to rubbing; and color fastness to crocking Method: AATCC 8, ISO 105 X12

ILT-U-1541Textile determinations – Colour Fastness; assessment of the potential to phenolic yellowing of materials

Description: Colour fastness: Part X18: assessment of the potential to phenolic yellowing of materials Method: ISO 105 X18

ILT-U-1534Textile determinations – Determination of mass per unit length

Description: Determination of mass per unit length and mass per unit area; Determination of mass per unit area using small samples; and Mass per Unit area (Weight) Method:

ILT-U-1536Textile determinations – Dimentional changes detremination

Description: Determination of dimensional change in washing and drying; domestic washing and drying procedures ; dimentional changes of fabrics after home laundering; and dimentional changes of garments after home laundering Method: ISO 5077, ISO 6330, AATCC 135, AATCC 150

ILT-U-1542Textile determinations – Fabric propensity to surface fuzzing and to pilling

Description: Fabric propensity to surface fuzzing and to pilling – Part 1: pilling box method; and Part 2: modified martindale method Method: ISO 12945-2, ISO 12945-1

ILT-U-1535Textile determinations – Number of threads per unit length deteremination

Description: Number of threads per unit length; and Warp (End); and Filling (Pick) Couunt of Woven Fabrics determinations Method: ISO 7211-2, ASTM D3775

ILT-U-1545Textile determinations – Quick methods for CF chlorine and Non-Chlorine Bleach

Description: Quick methods for CF chlorine and Non-Chlorine Bleach; and procedure for appearance of apparel & other textile end products after repeated home laundering Method: TS 001, TS 008

ILT-U-1544Textile determinations – Smoothness appearance of fabrics after repeated home laundering

Description: Smoothness appearance of fabrics after repeated home laundering; and appearance of apparel and other textile end products after repeated home laundering Method: AATCC 124, AATCC 143

ILT-U-1537Textile determinations – Spirality after laundering determination

Description: Determination of spirality after laundering (woven and knitted fabrics); determination of spirality after laundering (woven and knitted garments); and skewness change in fabric and garment twist resulting from automatic home laundering. Method: ISO 16322-2, AATCC 179, ISO 16322-3

ILT-U-1624Textile determinations – Yarm

Description: Breaking force and breaking elongation of a yarn with cv determination; breaking force and breaking elongation of a yarn; twist by direct counting method; linear density- test with CV determination; and Linear density Method: ISO 2060, ISO 2062, ISO 17202

ILT-U-298Textile determinations - Tensile strength

Description: Double tear resistance, Resistance to breaking and trapping of leather (Lastometer) Method: ASTM D2212, ASTM D2210, ASTM D2207

ILT-U-2286Textile determinations - Upholstered Furniture

Description:
Rule :

ILT-U-2213Textile determinations, 34

Description: Colour fastness to mild washing and Colour fastness to machine washing Method: ISO 15702, ISO 15703

ILT-U-2172Textile determinations. 01

Description: Liquid Moisture Management Properties Method: AATCC 195

ILT-U-1968Textile determinations. 02

Description: Fabric propensity to surface fuzzing and to pilling. Part 3: Random tumble pilling method Method: ISO 12945-3

ILT-U-1967Textile determinations. 03

Description: Number of threads per unit length Method: EN 1049-2

ILT-U-1966Textile determinations. 04

Description: Ligament Method: UNE 40161

ILT-U-1961Textile determinations. 05

Description: Number of stitches per unit length and unit area Method: EN 14971

ILT-U-1953Textile determinations. 06

Description: Burning behavior. Flame spread of vertically oriented specimens Method: EN 1102

ILT-U-1946Textile determinations. 07

Description: Colour fastness to organic solvents; Colour fastness to hot pressing; Colour fastness. Assessment of the potential to phenolic yellowing of materials; Colour fastness to washing with soap or soap and soda; and Colour fastness to bleaching: Hypochlorite Method: ISO 105 N01, ISO 105 C10, ISO 105 X18, ISO 105 X11, ISO 105 X05

ILT-U-1947Textile determinations. 08

Description: Determination of twist in single spun yarns — Untwist/retwist method; Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change; Determination of width and length; Determination of the fabric propensity to surface pilling, fuzzing or matting; and Methods for the presentation of a weave diagram and plans for drafting, denting and lifting Method: ISO 7211-1, ISO 22198, ISO 3759, ISO 12945-3, ISO 17202

ILT-U-1948Textile determinations. 09

Description: Determination of the recovery from creasing of a horizontally folded specimen of fabric by measuring the angle of recovery; Hydraulic method for determination of bursting strength and bursting distension; Determination of spirality after laundering. Woven and knitted fabrics; Determination of spirality after laundering. Woven and knitted garments; Determination of the abrasion resistance of fabrics by the Martindale method. Determination of mass loss; and Determination of the abrasion resistance of fabrics by the Martindale method. Assessment of appearance change. Method: ISO 12947-4, ISO 12947-3, ISO 16322-3, ISO 16322-2, ISO 13938-1, ISO 2313

ILT-U-1949Textile determinations. 10

Description: Technical requirements for determining a sharp point in toys and other articles intended for use by children under 8 years of age; Technical requirements for determining a sharp metal or glass edge in toys and other articles intended for use by children under 8 years of age; Flammability of clothing textiles; Convective heat resistance using a hot air circulating oven; and Abrasion resistance of protective clothing material Method: EN 530, ISO 17493, 16 CFR 1610, 16 CFR 1500.49, 16 CFR 1500.48

ILT-U-1950Textile determinations. 11

Description: testing performance when cleaning and finishing using tetrachloroethene; Determination of linear density of yarn removed from fabric; Determination of tear resistance. Constant rate of tear methods; and Determination of tear resistance. Ballistic pendulum method Method: ISO 4674-2, ISO 4674-1, ISO 7211-5, ISO 3175-2

ILT-U-1951Textile determinations. 12

Description: Puncture resistance; Burning behavior. Determination of ease of ignition of vertically oriented specimens; Burning behavior. Measurement of flame spread properties of vertically oriented specimens; Maximum force to seam rupture using the grab method; and Oil repellency. Hydrocarbon resistance test Method: ISO 14419,ISO 13935-2, ISO 6941, ISO 6940, EN 863

ILT-U-1952Textile determinations. 13

Description: Contact heat produced by heating cylinder; Retroreflection; Heat transmission on exposure to flame; Resistance to damage by flexing; Recommendations for the design and manufacture of children’s clothing – Mechanical safety; Measurement of the electrical resistance through a material (vertical resistance); and Abrasion resistance. Martindale abrader Method: ISO 5470-2,EN 1149-2, CEN/TR 16792, ISO 7854, ISO 9151, ISO 12127, CIE 54.2

ILT-U-1919Textile determinations. 14

Description: Determination of linear density of yarn removed from fabric; and Determination of number of threads per unit length Method: ISO 7211-2, ISO 7211-5

ILT-U-1920Textile determinations. 15

Description: Branched textile hydrophilicity Method: EN 14697

ILT-U-1921Textile determinations. 16

Description: Colour fastness to water; Colour fastness to perspiration; Colour fastness to rubbing; Assessment of the potential to phenolic yellowing of materials, and Colour fastness to artificial light (Method 3) Method: ISO 105-B02, ISO 105 X18, ISO 105 X12, ISO 105 E04, ISO 105-E01

ILT-U-1894Textile determinations. 17

Description: Thickness; Sole Adhesion test; and Lace Abrasion test Method: ISO 22774, ASTM D1777, SATRA TM404

ILT-U-1893Textile determinations. 18

Description: Tear Strength (Upper); Water Resistance (Outsole); and Accessories Corrosion Method: ISO 17696, ISO 5404, ISO 22775

ILT-U-1892Textile determinations. 19

Description: Slip Resistance; Flex Resistance (Outsole); and Abrasion Resistance (Outsole) Method: ISO 17707, ISO 13287, ISO 20871

ILT-U-1888Textile determinations. 20

Description: Dimensional stability to dry cleaning; and Aspect evaluation after dry cleaning. Method: ISO 3175-2

ILT-U-1887Textile determinations. 21

Description: Dimensional stability to Cold Water Immersion Method: ISO 6925

ILT-U-1886Textile determinations. 22

Description: Textile Floor Covering-Burning Behavior (Tablet Test Method) Method: ISO 6925

ILT-U-1885Textile determinations. 23

Description: Color Fastness to Rubbing: Organic Solvents Method: ISO 105 D02

ILT-U-1884Textile determinations. 24

Description: Determination of Air Permeability Method: ASTM D737

ILT-U-1883Textile determinations. 25

Description: Determination of Thickness. Method: ASTM D1777

ILT-U-1882Textile determinations. 26

Description: Determination of number of wales and courses. Method: ASTM D3887

ILT-U-280Textile determinations. 27

Description: Water Resistance: Rain Test; Water Repellency: Spray Test; Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus; Breaking Strength and Elongation of Textile Fabrics (Grab Test); Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method); Mass Per Unit Area (Weight) of Fabric; and Fiber Analysis: Qualitative Method: AATCC 20,AATCC 22, ASTM D1424, ASTM D5034, ASTM D4966, ASTM D3776, AATCC 35

ILT-U-1818Textile determinations. 28

Description: Flammability of textile fabrics when subjected to a small igniting flame applied to the face or bottom edge of vertically oriented specimens, Burning Behaviour – 45° Test – Determination of Flame Spread Rate, Determination of the abrasion resistance of fabrics by the Martindale method, Determination of mass loss, Determination of number of stitches per unit length and unit area, Cleansing and wetting procedures for use in the assessment of the effect of cleansing and wetting on the flammability of textile and fabric assemblies, and Flammability of children’s sleepwear Method: 16 CFR 1616, ISO 12947-3, 16 CFR 1615, BS 5651, EN 14971, GB/T 14644, BS 5438

ILT-U-069Textile determinations. 29

Description: Linear density; Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator; Colour fastness to hot pressing; and Breaking force and breaking elongation of a yarn Method: ISO 105 C08, ISO 105 X11, ISO 2062, ISO 2060

ILT-U-1785Textile determinations. 30

Description: DMFa; Glycols; and Chlorinated organic carriers (COC) Method: DIN 54232, ISO 16186

ILT-U-1064Textile determinations. 31

Description: Number of threads per unit length; Dimensional change in wash and drying; Tear force of wing-shaped test specimen; Maximum force using the strip method; Oil repellency; Colour fastness to dry cleaning; Colour fastness to organic solvents; Quantitative analysis; Recovery form creasing of a horizontally folded specimen by measuring the angle of recovery; and Linear density Method: ISO 7211-5, ISO 1833-3, ISO 1833-11, ISO 1833-1, ISO 1833-2, ISO 14419, ISO 1833-7, ISO 13934-1, ISO 13937-3, ISO 13937-1, ISO 6330, ISO 105 X05, ISO 105 D01, EN 1049-2, EN 22313

ILT-U-1757Textile determinations. 32

Description: Yarn number based on short-Length specimens; and Number of filaments on yarn or woven Method: ASTM D1059

ILT-U-208Textile determinations. 33

Description: Fiber analysis; Colorfastness assessment; pH Content; GSM; Tensile strength – strip method; Tensile strength – grab method; Bursting strength – Diaphragm Bursting Strength Tester Method; and Bursting strength – (CRT) Ball Burst Test Method: ASTM D3786, ISO 3801, ISO 3071, ISO 1833-1, AATCC 20, AATCC 1, ASTM D3787, ASTM D5034, ISO 13934-1

ILT-U-873Textile determinations. 34

Description: Tensile strength; Water penetration (Hydrostatic Pressure); Previous treatment – Washing and drying domestic (Flammability); Flammability- Checking Capability; Fiber Composition- up to 2 fibers; and Symbology of labeling conservation Method: ISO 1833-1, ISO 6330, ISO 811, ISO 3758, ISO 13934-1, ISO 12952-1

ILT-U-907Textile determinations. 35

Description: Previous treatment -Washing and drying domestic; Fire behavior; Flammability of floor coverings textile (textile methenamine) Method: 16 CFR 1615, 16 CFR 1630, 16 CFR 1631, 16 CFR 1616, AATCC 124

ILT-U-781Textile determinations. 36

Description: Previous treatment -Washing and drying domestic; Assessment of the ignitability of bedding items; Ignition source: smouldering cigarette; Assessment of the ignitability of bedding items; Ignition source: match-flame equivalent; Flammability of Blankets; Testing the Smolder Resistance of Materials Used in Upholstered Furniture Method: ISO 12952-1, California Technical Bulletin 117, ISO 12952-2, ASTM D4151, ISO 6330

ILT-U-1214Textile determinations. 37

Description: Method for determination of number of thread; Standard test method for pilling; Determination of tuft withdrawal force; Determination of abrasion resistance (Taber abrader); and Colour fastness to hot pressing Method: ISO 105 X11, ISO 7211-2, ISO 5470-1, ISO 4919, ASTM D3512, SASO 2654

ILT-U-224Textile determinations. 38

Description: Determination of certain flame retardants (Brominated flame retardants and Phosphorus flame retardants) Method: ISO 17881-1, ISO 17881-2

ILT-U-1548Textile determinations. 39

Description: Test for Colour Fastness to Perspiration; and Color fastness to Perspiration Method: AATCC 15, ISO 105 E04

ILT-U-480Textile determinations. 40

Description: Resistance to Slippage of Yarns Method: ASTM D434

ILT-U-314Textile determinations. 41

Description: Fiber composition Method: ISO 1833-4

ILT-U-212Textile determinations. 42

Description: Organic fluorine — Part 1: Determination of the non-volatile compound content (PFAS); Determination of chlorinated hydrocarbons in leather (SCCP + MCCP + LCCP); and Determination of halogenated compounds – flame retardants Method:

ILT-U-1024Textile determinations. 43

Description: Determination of mass per unit area; Determination of dimensional change in washing and drying; Qualitative and quantitative analysis of fibers; Determination of linear density (mass per unit length); Colour fastness to domestic and commercial laundering; Colour fastness to hot pressing; Determination of single-end breaking force and elongation at break; Colour fastness to domestic and commercial laundering; and Colour fastness to perspiration Method: ISO 105 E04, ISO 105-C06, ISO 2060, ISO 2062, ISO 105 X11, ISO 1833-1, ISO 12127, ISO 5077, ISO 105 C08

ILT-U-866Textile determinations. 44

Description: Formaldehyde; pH; and Wing Tear Method: SO 14184-1, ISO 13937-3, ISO 3071

ILT-U-853Textile determinations. 45

Description: Determination of mass per unit length and mass per unit area; Determination of the tendency to the formation of fluff and pellets. Modified Martindale method; Fastness tests. Part E04: Color fastness to perspiration; and Determining the dimensional variations in the washing and drying Method: ISO 12945-2, ISO 3801, ISO 5077, ISO 105 E04

ILT-U-634Textile determinations. 46

Description: Certain azo colorants in dyed leathers; Content of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers, and pentachlorophenol, its salts, and esters in leather; Phthalates in footwear materials; Quantitatively determine dimethyl fumarate (DMFU); Determination of organotin compounds; Chemical determination of metal content; and Determination of pH Method: ISO 17234-1, ISO 16179, ISO 17070, ISO/TS 16181, ISO 16186, ISO 17072-1, ISO 4045

ILT-U-607Textile determinations. 47

Description: Mass per unit area; and Quantitative Analysis of Textiles Method: ASTM D629, ASTM D3776

ILT-U-576Textile determinations. 48

Description: Tear strength determinations; Breaking strength and elongation determinations; Resistance pilling; Flame resistance; and Water penetration Method: ASTM D5034, ASTM D3512,ASTM D6413,ASTM D1424, AATCC 127

ILT-U-323Textile determinations. 49

Description: Determination of the number of warp yarns and number of weft yarns; and Determination of the mass per unit area Method: ASTM D3775, ASTM D3776

ILT-U-163Textile determinations. 50

Description: Determination of fabric propensity to surface fuzzing and to pilling – Part 2: Modified Martindale method; Light fastness; Wrinkle recovery; Spray test; Determination of formaldehyde; and Chromaticity coordinates Method: ISO 105-J01, ISO 14184-1, AATCC 22, AATCC 128, ISO 105-B02, ISO 12945-2

ILT-U-161Textile determinations. 51

Description: Determination of maximum force and elongation at maximum force using the strip method; Determination of tearing strength; Determinations of colour fastness to perspiration; Color fastness to washing; Colour fastness to hot pressing; colour fastness to rubbing; Determination of dimensional change in washing and drying; Determination of mass per unit area using small samples; Quantitative chemical analysis; and Quantitative chemical analysis — Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) Method: ISO 105-C06, ISO 105 E04, ISO 13937-1, ISO 13934-1, ISO 105 X11, ISO 105 X12, ISO 1833-11, ISO 1833-1, ISO 12127, ISO 5077

ILT-U-061Textile determinations. 52

Description: Determination of resistance to surface wetting (spray test); Determination of the permeability of fabrics to air; and Determination of width and length Method: ISO 4920, EN 1773, ISO 9237

ILT-U-031Textile determinations. 53

Description: Abrasion Test (Martindale): Colour fastness determinations in textile; Determination of mass per unit length and mass per unit area; Determination of formaldehyde in textiles; Determination of fabric propensity to surface fuzzing and to pilling – Modified Martindale method; Dimensional change after washing cloth home; Color fastness to washing; Heavy metals; Disperse dyes; Organo tins; Pthalates in polymers; Materials and articles in contact with foodstuffs; and Cadmium determination Method: EN 1122, ISO 12945-2, ISO 105-C06, DIN 53316, ISO 14184-1, VDA 275, ISO 17353, ISO 105 E04, EN 1186, AATCC 135, CPSC-CH-C1001-09, ASTM D3465, ISO 3801, ISO 105 X11, EN 13520, ISO 105 X12

ILT-U-013Textile determinations. 54

Description: Determination of tear force of trouser-shaped test specimens – Single Tear Method; Hydraulic method for determination of bursting strength and bursting distension; Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test; Determination of maximum force to seam rupture using the grab method; Determination of dimensional change in washing and drying; Flame Resistance of Textiles (Vertical Test); Determination of heat transmission on exposure to flame; Determination of contact heat transmission through protective clothing or constituent materials; Unsteady-state heat transfer evaluation of flame resistant materials for clothing with continuous heating; and Toys – specification for migration of certain elements Method: ASTM D6413, ASTM F2700, ISO 12127, ISO 9151, ISO 15025, ISO 5077, ISO 13938-1, ISO 13935-2, ASTM D3787, ISO 13937-2

ILT-U-1728Textile determinations. 55

Description: Number of threads per unit length; determination of tear force of trouser-shaped test specimens; oil repellency-Hydrocarbon resistance test; determination of pH; determination of the slippage resistance of yarns at a seam in woven fabrics Method: ISO 3071, ISO 14419, ISO 13937-2, ISO 13936-1, EN 1049-2

ILT-U-1727Textile determinations. 56

Description: Determination of maximum force and elongation at maximum force using the strip method; colour fastness to domestic and commercial laundering; colour fastness to artificial light: Xenon arc fading lamp test; determination of the abrasion resistance of fabrics by the martindale method; determination of fabric propensity to surface fuzzing and to pilling — Part 2: modified martindale method; determination of mass per unit area using small samples Method: ISO 12127, ISO 12945-2, ISO 12947-2, ISO 105-B02, ISO 105-C06, ISO 13934-1

ILT-U-1726Textile determinations. 57

Description: Determination of maximum force using the grab method; colour fastness to sea water; determination of dimensional change in washing and drying; domestic washing and drying procedures for textile testing; colour fastness to chlorinated water (swimming-pool water) Method: ISO 105-E03, ISO 6330, ISO 5077, ISO 105-E02, ISO 13934-2

ILT-U-325Textile determinations. 58

Description: Determinations of colour fastness to perspiration; test for colour fastness to rubbing; colour fastness to water; and determination of fabric propensity to surface fuzzing and pilling Method: ISO 12945-1, ISO 105-E01, ISO 105 E04, ISO 105 X12

ILT-U-609Textile determinations. 59

Description: Colour fastness to dye transfer; fabric weight; appearance after domestic washing & drying; and colour fastness to artificial sweat Method: ISO 16322-3, ISO 16322-2, ISO 16322-1, ISO 12127, AATCC 163, DIN 53160

ILT-U-608Textile determinations. 60

Description: Bursting and Determination of abrasion resistance (Taber abrader) Method: ISO 13938-2, ISO 5470-1

ILT-U-1677Textile determinations. 61

Description: Burning behavior: Determination of the ease of ignition; exposure to radiant heat; and determination of material behavior on the impact of small molten metal spatter Method: ISO 6940, ISO 6942, ISO 9150

ILT-U-1663Textile determinations. 62

Description: Type of ligament; linear density; mass per unit area; pilling resistance; and tear resistance Method: ASTM D1424,ISO 7211-5, ISO 12945-1, ASTM D3776, ISO 7211-1

ILT-U-1654Textile determinations. 63

Description: Burning behaviour; and Surface flammability of carpets and rugs Method: 16 CFR 1615, 16 CFR 1610, ISO 15025, 16 CFR 1616, 16 CFR 1630, 16 CFR 1631, EN 1102

ILT-U-1655Textile determinations. 64

Description: Washing/drying cycle; strength of dyes to sweat; and color fastness to light Method: ISO 105 E04ISO 105-B02, ISO 6330, ISO 7768,

ILT-U-1637Textile determinations. 65

Description: Calculation of colour differences: colour fastness to spotting: Water; fire behavior; and Colour fastness to washing with soap or soap and soda Method: 16 CFR 1610, ISO 105 C10, ISO 105 E07,ISO 105 J03

ILT-U-1627Textile determinations. 66

Description: Tearing strength; pilling resistance; width of textile fabric; end (warp) and pick (filling) count of woven fabrics; mass per unit area (weight); bursting strength; and abrasion resistance Method: ASTM D4966, ASTM D2261, ASTM D3776, ASTM D3775, ASTM D3774, ASTM D3512, ASTM D3786

ILT-U-1628Textile determinations. 67

Description: Colorfastness to crocking; to laundering; to light: xenon-arc; fiber analysis: quantitative; smoothness appearance of fabrics after repeated home laundering; and dimensional changes of fabrics after home laundering Method: AATCC 135, AATCC 124, AATCC 20A, AATCC 61, AATCC 16, AATCC 8

ILT-U-1625Textile determinations. 68

Description: Dimethyl fumarate; residues of solvents; and generic determination of smells Method: ISO/TS 16189, ISO 16186, GB 18401

ILT-U-1620Textile determinations. 69

Description: Small parts; Use & abuse test; Sharp points; Sharp edges; Colour fastness to hot pressing; and Dimensional change after washing cloth home Method: 16 CFR 1500.48, 16 CFR 1500.49, 16 CFR 1500.51, 16 CFR 1500.52, 16 CFR 1500.53, 16 CFR Part 1501, AATCC 135, ISO 105 X11

ILT-U-1538Textile determinations. 70

Description: Weight Thickness Tension Dynamic elongation Tear resistance (long and transv) Tear resistance per stitch Smoothness Bending length Chemical resistance (veslic dry – 20c) Flamability Elongation under constant load Adherence Abrasion resistance Method: ISO 11644, ISO 11640, ISO 17235, ISO 3795, ASTM D3776, ISO 3377-1, ASTM D2261, ISO 13934-1, ASTM D5034, ISO 3376, ASTM D1813, ASTM D2208, ASTM D2211, ASTM D5587, ISO 23910, BN-157-01, BN 157-02, BN 107-01, SAE J855

ILT-U-1524Textile determinations. 71

Description: Determination of maximum force to seam rupture using the strip method Method: ISO 13935-1

ILT-U-1523Textile determinations. 72

Description: Determination of mass per unit area; and Determination of thickness Method: ISO 9073-1, ISO 9073-2

ILT-U-1522Textile determinations. 73

Description: Determination of tensile strength and elongation; Determination of breaking strength and elongation of nonwoven materials using the grab tensile test; and Determination of tear resistance Method: ISO 9073-4, ISO 9073-3, ISO 9073-18

ILT-U-1491Textile determinations. 74

Description: Tensile strength and elongation; and Slippage of standard seam Method: NBR 13041, NBR 9925, ISO 9073-3

ILT-U-1327Textile determinations. 75

Description: Determination of breaking strenght and elongation (strip); Nonwoven – Determination of tensile strength and elongation; Determination of slippage of a standard seam; and Determination of density yarn Method: NBR 11912, NBR 10588, NBR 9925, NBR 13041

ILT-U-1326Textile determinations. 76

Description: M.D abrasion; Vamp flexing; Toe post Strength; Attachment Strength of Strap; and Heel fatigue Method: SATRA TM31, SATRA TM118, SATRA TM120, SATRA TM25, SATRA TM21

ILT-U-1236Textile determinations. 77

Description: Determination of metals using microwave digestion – Heavy Metals (As, Cd, Co, Cr, Cu, Hg, Ni, Pb, Sb); Determination of metals extracted by acidic artificial perspiration solution – Heavy Metals (As, Cd, Co, Cr, Cu, Hg, Ni, Pb, Sb); Detection of the use of certain azo colorants accessible with and without extracting the fibers; Detection of the use of certain azo colorants, which may release 4-aminoazobenzene); and Phthalates Method: ISO 14362-1, ISO 14362-3, EN 16711-1, EN 16711-2, EN 15777

ILT-U-850Textile determinations. 78

Description: Determination of the number of threads per unit length of warp and weft of flat fabrics; Determination of the repellency of fabrics to water (Spray test); Instrumental measurement of color in textiles; Quantitative analysis of textile fibers; Qualitative analysis of textile fibers; Determination of the pH of the aqueous extract of wet processed textiles; Dimensional change in clothes by washing in automatic machine for domestic use; and Dimensional change in fabrics after washing in a domestic machine. Method: AATCC 135, NTC 2308, AATCC 150, AATCC 81, AATCC 20, ASTM D629, AATCC 22, NTC 5495, NTC 481-3, NTC 908, NTC 1213, NTC 0151, NTC 427, ASTM D3775

ILT-U-628Textile determinations. 79

Description: Tear resistance; Color fastness to perchlorethylene determination; Recouvery from creasing of a horizontally folded specimen by measuring the angle of recouvery; Density of yarns; Methods for the presentation of a weave diagram and plans for drafting, denting and lifting; and Oil repelances Method: EN ISO 13937-3, ISO 13937-2, ISO 105 D01, ISO 7211-5, ISO 7211-1, ISO 14419, ISO 22313

ILT-U-588Textile determinations. 80

Description: Grammage; dimension; and pH Method: ISO 3801, ISO 3071, ISO 22198

ILT-U-440Textile determinations. 81

Description: Wrinkle Recovery of Fabrics: Appearance Method; Maximum force to seam rupture using the grab method; Hydraulic method for determination of bursting strength and bursting distension; Pneumatic method for determination of bursting strength and bursting distension; Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine); Basic ligaments of woven fabrics; and Determination of the width of tissue of nonwovens and fabrics Method: AATCC 128, ISO 13935-2, ISO 13938-1, ISO 13938-2, ASTM D2261, NBR 12546, ISO 3572, NBR 10589, ISO 22198

ILT-U-450Textile determinations. 82

Description: Colour fastness to artificial light: Xenon arc fading lamp test; Colorfastness to Crocking Testing; Colorfastness to Perspiration Testing; Colorfastness to Laundering Testing; Colorfastness to Sea Water Testing; and Fiber Analysis: Qualitative and Quantitative Method: AATCC 106, AATCC 61, AATCC 15, AATCC 8, ISO 105-B02, AATCC 20A, AATCC 20

ILT-U-004Textile determinations. 83

Description: Light fastness; color fastness to rubbing; and mass per unit area (weight) Method: ISO 105-B02, ISO 105 X12, ASTM D3776

ILT-U-1576Textile floor coverings determination

Description: Determination of thickness loss under dynamic loading Method: ISO 2094

ILT-U-2014Thickness determination for leather sample.

Description: Thickness Method: ISO 2589

ILT-U-1514Trapezoidal tear resistance

Description: Method: ASTM D4533

ILT-U-395Twsit in single yarns.

Description: Twisting and untwisting method. Method: NTC 443

ILT-U-427Ultraviolet protection factor determination

Description: AATCC 183 Method: AATCC 183

ILT-U-988Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Continuous Heating

Description: Method: ASTM F2700

ILT-U-1028Upper flexing resistance in footwear

Description: Method: EN 13512

ILT-U-1578Water penetration test

Description: Method: AATCC 127

ILT-U-441Water Repellency: Spray Test

Description: AATCC 22 Method: AATCC 22

ILT-U-1367Water vapour permeability and chrome content in leather

Description: Water vapour permeability; and Chrome content. Method: ISO 5398, ISO 14268

ILT-U-676Weaves determinations

Description: Method: ISO 3572

ILT-U-1001Weight and Fabric Frame Base Plans determinations

Description: Weight and weave classification. Method: NBR 10591, NBR 12546

ILT-U-340Wet blue determinations (leather)

Description: Chrome content; pH; TCMTB content; and Moisture Method: ISO 5398, ASTM D6657, ISO 13365, ASTM D6658

ILT-U-594Whiteness in textile

Description: Method: AATCC 110

ILT-U-679Width and length determination in Textile

Description: Method: ISO 22198

ILT-U-1257Wrinkle Recovery of Fabrics

Description: Appearance Method Method: AATCC 128

ILT-U-394Yarn. Determination of Twist in Yarns.

Description: Direct Couting Method. Method: NTC 752

Category of Schemes
ILT – Interlaboratory Test
Scroll to Top