close
  • Follow us
CATEGORIESILT CODENAMESUMMARYSELECT
ILT-U-661Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion

Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion

ILT-U-1807Aging behavior. Weathering in dry, hot climate

Description: Duration: 1600 hs Method: PV 3929

ILT-U-1808Aging behavior. Weathering resistance, humid heat

Description: Duration: 1600 hs Method: PV 3930

ILT-U-922Ash Content in Plastics

Description: Method: ASTM D5630

ILT-U-1009Ash determination in PVC pipes and connections

Description: Method A Method: NBR NM 84

ILT-U-911Bulk density and volatile matter determinations in Polyvinyl chloride

Description: Bulk density and Volatile matter Method: ASTM D2584, ASTM D1622

ILT-U-670Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems

Description: Method: ASTM D2846

ILT-U-517Coefficients of friction

Description: Method: ASTM D1894

ILT-U-2231Colorants in plastic materials determination

Description: Colorants in plastic materials and articles coming into contact with food. No visible migration (for finished products); Metals and metalloids; Carbon black (only for carbon black); Inorganic cadmium pigments; Unsulphonated Aromatic amines(only for powder sample, and indicate test according to pigments or dyes ); Specific aromatic amine(Benzidine, 2-naphthylamine, 4-aminodiphenyl) and sulphonated aromatic amines; and Polychlorinated biphenyls Method: Council of Europe AP(89)1

ILT-U-1043Compressive properties of oriented fiber-resin composites determination

Description: Compressive properties of oriented fiber-resin composites determination Method: SACMA SRM-IR-94

ILT-U-1044Compressive properties of rigid plastics determination

Description: Compressive properties of rigid plastics determination Method: ASTM D695

ILT-U-1509Continuous compression deformation test

Description: Aging of elastomeric parts in greenhouses with measurement of hardness variation IRHD; Aging of elastomeric parts in corn oil with IRHD hardness variation measurement; Aging of the elastomeric parts in distilled water with volume variation measurement; Aging of the elastomeric parts in acetic acid with volume variation measurement; and Permanent Compression Deformation Method: NBR 11823

ILT-U-660Crush resistance in pipes and connections determination

Description: Method: ASTM D2241, ASTM D1785

ILT-U-292Density and Specific Gravity (Relative Density) of Plastics by Displacement

Description: ASTM D792 Method: ASTM D792

ILT-U-523Determination of 2 % Secant Modulus for Polyethylene Geomembranes

Description: Method: ASTM D5323

ILT-U-304Determination of ash content in thermoplastics

Description: Method: ASTM D5630

ILT-U-719Determination of ash content on PVC pipes and fittings

Description: Ash Method: ASTM D5630

ILT-U-1844Determination of Chloroform Soluble Extractive in Resinous and polymeric coatings use as food contacting material

Description: Simulant: Deionized Water, EtOH 8%, n-Heptane Method: 21 CFR 175.300

ILT-U-556Determination of density of plastics by the density gradient technique. Gradient Column

Description: Method: ASTM D1505

ILT-U-1387Determination of melt flow rate (MFR) and melt volume rate (MVR)

Description: Method: ASTM D1238

ILT-U-672Determination of resistance to external blows

Description: Round-the-clock method Method: ISO 3127

ILT-U-303Determination of the index of fluidity in samples plastic

Description: Method: ASTM D1238

ILT-U-557Determination of the transition temperature of polymers by differential scanning calorimetry

Description: Method: ASTM D3418

ILT-U-254Determination of Thickness of Plastic Film Test Specimens

Description: ASTM D6988 Method: ASTM D6988

ILT-U-1457Determinations in plastic

Description: compressive test and cross cut test Method: ISO 2409, ISO 604

ILT-U-920Determining the Izod Pendulum Impact Resistance of Plastics

Description: Method: ASTM D256

ILT-U-1847Different determinations for Nylon Resins use as food contacting material

Description: Extractable Fractions in Nylon Resins (Deionized Water extractives, 95% ethanol extractives, Ethyl acetate extractives, and Benzene extractives); Specific Gravity in Nylon; Melting Point in Nylon Resins; and Solubility in Boiling HCl in Nylon Resins Method: 21 CFR 177.1500

ILT-U-1845Different determinations for Olefin polymers use as food contacting material

Description: Determination of Extractable Fraction for Olefin polymers (Hexane); Determination of Soluble Fraction for Olefin polymers (Xylene); Determination of Density for Olefin polymers; and Determination of Melting Point for Olefin polymers Method: 21 CFR 177.1520

ILT-U-1342Dimensional stability of PVC pipes

Description: Method: NBR 5687

ILT-U-1386Dimensions of Thermoplastic Pipe and Fittings

Description: Method: ASTM D2122

ILT-U-1640Elemental analysis on polymeric materials by FTIR

Description: Method: ASTM E1252

ILT-U-2233Epoxy resins determination

Description: Restriction of use of certain epoxy derivatives. Overall migration in 10% ethanol (pH>4.5 aqueous foods); Overall migration in 3% acetic acid (pH?4.5 acidic foods); Overall migration in 20% ethanol (alcohol content?20% foods); Overall migration in 50% ethanol (alcohol content>20% or oil in water emulsions); Overall migration in rectified olive oil or substitute of rectified olive oil (fatty foods); Specific migration of primary aromatic amine in 3 % acetic acid; and Soluble heavy metal (Al, Ba, Co, Cu, Fe, Li, Mn, Zn,Ni) Method: Commission Regulation (EU) No 10/2011, Commission Regulation (EC) No 1895/2005

ILT-U-291Exposure to Laboratory Light Sources: Accelerated UV Ageing. PT

Description: Exposure to Laboratory Light Sources. Accelerated UV Ageing. (10 cycles of 8 hours of UVA-340 ultraviolet light at 60°C, followed by 4 hours of condensation (simulating dew) at 50°C.); and Color Determination of Plastic Pellets Method: ASTM G154, ASTM D6290

ILT-U-1764Exposure to Laboratory Light Sources: Xenon Arc Lamps

Description: Exposure to Laboratory Light Sources: Xenon Arc Lamps (300 hours); and Color Determination Method: ISO 4892-2, ASTM D6290

ILT-U-374Fiber Reinforced Plastics test

Description: ISO 527-4, ISO 527-5, ISO 14125, ISO 14126, & ISO 14130. Method: ISO 527-4, ISO 527-5, ISO 14125, ISO 14126, ISO 14130

ILT-U-666Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints

Description: Pressure test for leakproofness Method: ISO 3603

ILT-U-1914Flammability in plastics

Description: Flammability Method: UL 94

ILT-U-998Fluorescent Ultraviolet (UV) Exposure of Photodegradable plastics

Description: Exposure of Photodegradable plastics. Method: ASTM D5208

ILT-U-1915Heavy Metal content in plastics

Description: Lead, Zinc, Cadmium, Mercury, and Arsenic Method:

ILT-U-520Hot seal strength determination

Description: Method: ASTM F1921

ILT-U-999Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material

Description: Energy dispersive X-ray spectrometry Method: ASTM F2617

ILT-U-1063Impact Resistance of Plastic Film by the Free-Falling Dart Method. PT

Description: Impact resistance. Method: ASTM D1709

ILT-U-1423In-plane shear response of polymer matrix composite materials by tensile test of a +/- 45° laminate determination

Description: In-plane shear response of polymer matrix composite materials by tensile test of a +/- 45° laminate determination Method: ASTM D3518

ILT-U-668Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

Description: Method: ASTM D3212

ILT-U-673Longitudinal reversion

Description: Thermal reversion Method: ISO 2505

ILT-U-921Melt Flow Rates of Thermoplastics by Extrusion Plastometer

Description: Method: ASTM D1238

ILT-U-2236Nylon products determination. PT

Description: Plastic materials and articles intended to come into contact with food. Overall migration in 10% ethanol (pH>4.5 aqueous foods); Overall migration in 3% acetic acid (pH?4.5 acidic foods); Overall migration in 20% ethanol (alcohol content?20% foods); Overall migration in 50% ethanol (alcohol content>20% or oil in water emulsions); Overall migration in rectified olive oil or substitute of rectified olive oil (fatty foods); Specific migration of primary aromatic amine in 3 % acetic acid; Soluble heavy metal (Al, Ba, Co, Cu, Fe, Li, Mn, Zn,Ni); and Specific migration of caprolactam in 3% acetic acid Method: Commission Regulation (EU) No 10/2011

ILT-U-515OD Test

Description: Method: ASTM D1505

ILT-U-1048Open-hole compressive strength of polymer matrix composite laminates determination

Description: Open-hole compressive strength of polymer matrix composite laminates determination Method: ASTM D6484

ILT-U-1267Open-hole testing strength of polymer matrix composite determination

Description: Open-hole testing strength of polymer matrix composite determination Method: ASTM D5799

ILT-U-158PBBS & PBDES determinations in plastic

PBBS & PBDES

ILT-U-058Physicochemical Tests for Plastic pharmaceutical Containers

Description: USP <661> Method: USP 661

, ILT-U-2312Plastic -Toy compounds determination.

Description:
Standard :

ILT-U-1172Plastic chairs determinations

Description: Visual verification; Dimensional verification; Static load test; Impact resistance test; and Test for strength of hind legs Method: NBR 14776

ILT-U-1912Plastic corrosivity

Description: Weight loss in HCL 10%, Weight loss in NA OH 10%, and Weight loss in Dis.water Method:

ILT-U-2169Plastic determinations. 1A

Description: Glass transition temperature and glass transition step height; and TGA Thermogravimetry Method: ISO 11358-1, ISO 11357-2

ILT-U-1796Plastic determinations. 1B

Description: Overall Migration from plastic using MPPO as a simulant; and BISPHENOL A Method: EN 1186-13

ILT-U-1231Plastic determinations. 1C

Description: Density; Melt Flow index; Mechanical properties; Dimensions of the tubes; Resistance to internal pression; and Tear resistance Method: ISO 3126, ISO 1167, EN 388, ISO 527, ISO 1133-1, ISO 1183-1

ILT-U-2170Plastic determinations. 1D

Description: Temperature and enthalpy of melting and crystallization; and TGA Thermogravimetry Method: ISO 11358-1, ISO 11357-3

ILT-U-2173Plastic determinations. 1E

Description: Burning behavior by oxygen index (Ambient-temperature test) Method: ISO 4589-2

ILT-U-1913Plastic FTIR Spectrophotometer

Description: FTIR Spectrophotometer Method:

ILT-U-1141Plastic tensile properties

Description: plasticized PVC hose. ASTM D638 Method: ASTM D638

ILT-U-200Plastics Methodology for Assessing Polymer Photo-aging by FTIR

Description: 300 hrs and compare carbonyl Method: ISO 10640

ILT-U-2235Polycarbonate products determination

Description: Plastic materials and articles intended to come into contact with food. Overall migration in 10% ethanol (pH>4.5 aqueous foods); Overall migration in 3% acetic acid (pH?4.5 acidic foods); Overall migration in 20% ethanol (alcohol content?20% foods); Overall migration in 50% ethanol (alcohol content>20% or oil in water emulsions); Overall migration in rectified olive oil or substitute of rectified olive oil (fatty foods); Specific migration of primary aromatic amine in 3 % acetic acid; Soluble heavy metal (Al, Ba, Co, Cu, Fe, Li, Mn, Zn,Ni); and Specific migration of BPA in 50% ethanol Method: Commission Regulation (EU) No 10/2011

ILT-U-1161Polyethylene determinations

Description: Melt Flow Index (MFI); density by displacement; and density by gradient technique, Method: ASTM D1238, ASTM D792, ASTM D1505

ILT-U-2058Polymer determinations. 1A

Description: Limiting Oxygen Index Method: ISO 13501

ILT-U-2049Polymer determinations. 1B

Description: Tensile & Elongation Method: ISO 188, ISO 37

ILT-U-338Polymers and Phenolic resins determinations

Description: Heat and temperatures of reaction by differential scanning calorimetry, and Termogravimety (mass loss) and differential scanning calorimetry Method: ISO 11357, ISO 11358, ISO 11409

ILT-U-1293Polyurethane Raw Materials Determination of the Isocyanate Content of Aromatic Isocyanates

Description: Determination of the Isocyanate content of aromatic Isocyanates Method: ASTM D5155

ILT-U-828PVC tubes determinations

Description: Vicat softening temperature; resistance to internal hydraulic pressure sustained for a long period pipes and fittings; Resistance to internal hydraulic pressure for a short period in pipes and fittings; Dimensions in pipes and fittings; Pipes and Fittings – Flammability of Plastic; Tightness of the joint ring of elastomeric material; and Determining the rigidity of plastic tubes Method: ASTM D2412, ASTM D3212, ASTM D635, ASTM D2122, ASTM D1598, ASTM D1599, ISO 2507-1, ISO 2507-2

ILT-U-664Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

Description: Method: ASTM D635

ILT-U-665Resistance to impact on pipes and connections

Description: Method: ASTM D224

ILT-U-662Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings

Description: Method: ISO 1167, ASTM D1599

ILT-U-669Rigidity of plastic tubes determination

Description: Method: ASTM D2412

ILT-U-2230Rubber products determination

Description: Rubber products intended to come into contact with foodstuffs. Overall migration in 10% ethanol (pH>4.5 aqueous foods); Overall migration in 3% acetic acid (pH?4.5 acidic foods); Overall migration in 20% ethanol (alcohol content?20% foods); Overall migration in rectified olive oil or substitute of rectified olive oil; Overall migration in 50% ethanol (alcohol content>20% or oil in water emulsions); Nitrosamine and Nitrosatable; and Specific migration of aromatic amine Method: Europe Council Resolution ResAP (2004)4

ILT-U-1421Short-Beam strength of polymer matrix composite materials and their laminates determination

Description: Short-Beam strength of polymer matrix composite materials and their laminates determination Method: ASTM D2344

ILT-U-1849Specific Migration of PAH and formaldehyde and acetaldehyde

Description: Specific Migration of PAH (Deionized Water, or 3% Acetic Acid, or Olive Oil) and specific migration of formaldehyde and acetaldehyde (Deionized Water, and 3% Acetic Acid) Method: EN 13130-1

ILT-U-487Taber Abrasion

Description: ASTM D3389 and NCh 773/2 Of. 1992. Method: ASTM D3389, NCh 773/2 Of. 1992.

ILT-U-519Tear-propagation resistance determination

Description: Method: ASTM D1938

ILT-U-550Tensile Properties of Plastics

Description: Method: ASTM D638

ILT-U-1265Tensile properties of polymer matrix composite materials

Description: Tensile properties of polymer matrix composite materials Method: ASTM D3039

ILT-U-253Tensile Properties of Thin Plastic Sheeting

Description: ASTM D882 Method: ASTM D882

ILT-U-257Test Method for Propagation Tear Resistance of Plastic Film

Description: ASTM D1922 Method: ASTM E1922

ILT-U-667Test methods for the resistance to dichloromethane at a specified temperature (DCMT)

Description: Unplasticized poly(vinyl chloride) (PVC-U) pipes. Method: EN 580

ILT-U-300Test of resistance to stress and thermal reversion in plastics

Description: Method: ASTM D638, ISO 2525

ILT-U-1314Thermal conductivity in polymers

Description: thermal conductivity Hot Disk tps 1500 Method: ISO 22007-2

ILT-U-087Thermal insulating products for building applications. 1A

Description: Determination of deformation under specified compressive load and temperature conditions Method: EN 1605

ILT-U-088Thermal insulating products for building applications. 1B

Description: Determination of dimensional stability Method: EN 1603, EN 1604

ILT-U-089Thermal insulating products for building applications. 1C

Description: Determination of bending behavior Method: EN 12089

ILT-U-090Thermal insulating products for building applications. 1D

Description: Determination of compression behavior Method: EN 826

ILT-U-659Time-to-Failure of Plastic Pipe Under Constant Internal Pressure

Description: Method: ISO 1167, ASTM D1598

ILT-U-663Tubes and connections dimensions determination

Description: Method: ASTM D2122, ISO 3126

ILT-U-671Vicat softening temperature determination

Description: Method: ISO 2507-1, ISO 2507-2

ILT-U-531Water Absorption of Plastics

Description: Method: ASTM D570

ILT-U-521Water vapor transmission rate determination

Description: Method: ASTM F1249

ILT-U-514Wetting tension test

Description: Method: ASTM D2578

Category of Schemes
ILT – Interlaboratory Test
Scroll to Top