close
  • Follow us
CATEGORIESILT CODENAMESUMMARYSELECT
ILT-U-1715Assessment of resistance of materials to molten metal splash. PS

Description: Assessment of resistance of materials to molten metal splash Method: ISO 9185

ILT-U-461Determination of different parameters in helmets

Description: ANSI Z89 Method: ANSI Z89

ILT-U-2119Electrical testing of Hand-Held Live-Line Insulating Tools

Description: Electrical testing of Hand-Held Live-Line Insulating Tools (Fiberglass-Reinforced Plastic (FRP) Method: ASTM F3121

ILT-U-2112Face mask determinations. 1A

Description: Differential Pressure for breathability Method: EN 14683

ILT-U-2108Face mask determinations. 1B

Description: Valve Leak Test Method: NIOSH

ILT-U-2107Face mask determinations. 1C

Description: Inhalation and Exhalation Method: NIOSH

ILT-U-2106Face mask determinations. 1D

Description: Dioctyl Phthalate (DOP) Method: NIOSH

ILT-U-2105Face mask determinations. 1E

Description: Sodium Chloride (NaCl) Method: NIOSH

ILT-U-2104Face mask determinations. 1F

Description: Sodium Chloride (NaCl) Challenge – screening test Method: NIOSH

ILT-U-2100Face mask determinations. 1G

Description: Microbial Cleanliness for Face Masks Method: EN 14683

ILT-U-2099Face mask determinations. 1H

Description: Particle Filtration Efficiency Method: ASTM F2100

ILT-U-2098Face mask determinations. 1I

Description: Flamability Method: ASTM F2100

ILT-U-2097Face mask determinations. 1J

Description: Synthetic Blood Penetration for Face Masks Method: EN 14683, ASTM F2100

ILT-U-2091Face mask determinations. 1K

Description: Bacterial Filtration Efficiency includes Diff. Pressure for breathability Method: EN 14683, ASTM F2100

ILT-U-1028Fiberglass-Reinforced Plastic (FRP) rod and tube used in live Line tools determination

Description: Power frequency applied voltage. Clause 12.2 (method 1) Method: ASTM F711

ILT-U-2118Flexible and Rigid Insulated Temporary By-Pass Jumper

Description: Flexible and Rigid Insulated Temporary By-Pass Jumper determinations Method: ASTM F2321

ILT-U-238Free drop test on 6 feet energy absorber, after conditioning

Description: Environmental conditioning. Humid environment Method: ANSI Z359.13:2009 clause 4.4

ILT-U-2096Gloves determinations

Description: Burning behaviour of gloves Method: EN 407

, , ILT-U-1550Gowns determinations.

Description: Synthetic Blood Penetration Method: ISO 16603

ILT-U-1180Helmets determinations

Description: Peripheral vision; Roll-off (positional stability); Retention strength; and Impact attenuation Method: 16 CFR 1203

ILT-U-1324Helmets for motorcycle users

Description: Method: NBR 7471

ILT-U-148Increased Robustness in safety glasses

Description: EN 166 Method: EN 166

ILT-U-422Individual protection of eyes determinations

Description: Field of view; Eyepieces without filtering action; Variation in transmittance; Diffusion of light; Minimum strength; High temperature stability; Resistance to ultraviolet radiation; Resistance to ignition; Protection against drops and splashes of liquids; Side protection; Resistance to surface deterioration due to fine particles; and Resistance of the eyepieces to fogging Method: EN 166

ILT-U-744Microbiological determinations in gloves. PS

Description: Total count; Fungi and yeasts count; Staphylococcus aureus (qualitative); Salmonella spp (qualitative); Pseudomonas aeruginosa (qualitative); Enterobacteriaceae (qualitative); and Escherichia Coli (qualitative) in surgical / non-surgical gloves Method:

ILT-U-048Migration test

Description: Overall migration into aqueous food simulants by total immersion. Ethanol 50% Method: BS EN 1186-3

ILT-U-1112Personal eye protection determinations

Description: Resistance to surface damage by fine particle Method: EN 168

, ILT-U-2309Personal eye-protection

General requirements, Materials, Adjustment and adaptation, Ventilation, Field of vision, Strength resistance, Water and snow protection, Resistance to ignition, Cleaning, Resistance to damage by fine particles (L&R), Resistance to fogging of oculars (L&R)

ILT-U-242Personal Safety determinations.

Description: Dynamic performance test. Harnesses (sling) Y dual connection Method: ANSI Z359.13:2009 clause 4.9

, ILT-U-2280Protective clothing determination

Protective clothing against pesticide

ILT-U-1717Protective clothing determinations. PS

Description: Puncture resistance; tear resistance; color measurement in new state; color measurement after exposure to light; determination of contact heat transmission through protective clothing or constituent materials; oil repellency-Hydrocarbon resistance test ; determination of resistance to damage by flexing method C: Crumple flex; abrasion resistance, Martindale Method: ISO 5740, ISO 7854, ISO 12127, ISO 14419, EN 863, ISO 9173-4, ISO 20471

ILT-U-2211Protective gloves determinations

Description: Burning behaviour; Contact heat transfer; Convective heat transfer; Radiant Heat transfer; Small splashes of molten metal; and Molten metal splash Method: ISO 9185, EN 407, EN 348, ISO 6942, ISO 12127-2, ISO 6941

ILT-U-1716Resistance to water penetration determination. PS

Description: Resistance to water penetration- after pretreatment-flexing; and resistance to water penetration- after pretreatment-influence of fuel and oil Method: EN 343

ILT-U-1622Safety gloves determinations

Description: Determination of thickness; puncture resistance; and measurement of surface resistivity Method: EN 1149-1, ISO 2589, EN 388

ILT-U-656Single-use medical examination glove. PS

Description: Method: ISO 11193-2

ILT-U-2268Ski goggles determinations

Description: Resistance to Fogging Method: ASTM F659

ILT-U-260Static resistance test on harness

Description: ANSI Z359.1 Method: ANSI Z359.1

ILT-U-2266Sunglasses determinations

Description: All requeriments Method: ISO 12312-1

ILT-U-251Tension test and Free drop test to Full body harness with front attachment.

Description: ANSI Z359.1:2007 clause 4.3.3.1a and 4.3.3.2a. Method: ANSI Z359.1:2007 clause 4.3.3.1a and 4.3.3.2a.

ILT-U-250Tension test and Free drop test to full body harness.

Description: ANSI Z359.1:2007 clause 4.3.3.1; and 4.3.3.2 ANSI Z359.3:2007 clause 4.2.3.2 Method: ANSI Z359.1:2007 clause 4.3.3.1; and 4.3.3.2, ANSI Z359.3:2007 clause 4.2.3.2

ILT-U-249Tension test and Free drop test to positioning and restriction sling with fixed length.

Description: ANSI Z359.1:2007 clause 4.3.4.1.1 and 4.3.4.2. ANSI Z359.3:2007 clause 4.2.2.1 and 4.2.2.3 Method: ANSI Z359.1:2007 clause 4.3.4.1.1 and 4.3.4.2, ANSI Z359.3:2007 clause 4.2.2.1 and 4.2.2.3

ILT-U-252Tension test and Free drop test to rescue harness and a evacuation harness.

Description: ANSI Z359.4:2007 clause 4.3.1.1 and 4.3.1.2. Method: ANSI Z359.4:2007 clause 4.3.1.1 and 4.3.1.2.

ILT-U-247Tension test and Free drop test to String adjuster

Description: Clause 4.2.1.1; and clause 4.2.1.2 Method: ANSI Z359.3 clause 4.2.1.1 and clause 4.2.1.2

ILT-U-246Tension test and Free drop test, Single sling with energy absorber,

Description: Clause 4.6 and 4.5 Method: ANSI Z359.13:2009 clause 4.6 and 4.5

ILT-U-241Tension test and Free drop test, synthetic rope hoist

Description: Clause 4.3.4.1 and 4.3.4.2 Method: ANSI Z359.4:2009 clause 4.3.4.1 and 4.3.4.2

ILT-U-245Tension test and Free drop test, Y sling with energy absorber,

Description: Clause 4.7 and 4.9. Method: ANSI Z359.13:2009 clause 4.7 and 4.9

ILT-U-248Tension test to positioning and restraint sling with adjustable length

Description: ANSI Z359.1:2007 clause 4.3.4.1.2 and ANSI Z359.3:2007 clause 4.2.2.2 Method: ANSI Z359.1:2007 clause 4.3.4.1.2, ANSI Z359.3:2007 clause 4.2.2.2

ILT-U-243Test activation tension on 6 feet energy absorber

Description: Charge to 2 KN according to ANSI Z359.13:2009 clause 4.2; and Charge to 22 KN according to ANSI Z359.13:2009 clause 4.3. Method: ANSI Z359.13:2009 clause 4.3, ANSI Z359.13:2009 clause 4.2

ILT-U-244Test activation tension on 6 feet energy absorber. 1A

Description: Charge to 2 KN (clause 4.3.5.1.1); and Charge to 22 KN (clause 4.3.5.1.)2 Method: ANSI Z359.1:2009 clause 4.3.5.1.1, ANSI Z359.1:2009 clause 4.3.5.1.2

ILT-U-243Test activation tesnion on 6 feet energy absorber. 1B

Description: Charge to 2 KN according to ANSI Z359.13:2009 clause 4.2; and Charge to 22 KN according to ANSI Z359.13:2009 clause 4.3. Method: ANSI Z359.13:2009 clause 4.2,ANSI Z359.13:2009 clause 4.3

ILT-U-001Test of charge to break Sling. PS

Description: ASME B30.9:2006 Method: ASME B30.9

ILT-U-652UVA and UVB grade in sunglasses. PS

Description: Method: EN 1836

Category of Schemes
ILT – Interlaboratory Test
Scroll to Top