close
CATEGORIESILT CODENAMESUMMARYSELECT
ILT-U-1642Cardboard determinations

Description: Water absorption capacity – cobb method; thickness; grammage; resistance to column compression; and seal strength of flexible barrier materials (Technique A – unsupported) Method: ISO 535, ISO 536, ISO 3034, ISO 3037, ASTM F88

ILT-U-549Climatic Test (humidity and temperature) for shipping containers

Description: Method: ISTA

ILT-U-343Determination in corrugated cardboard

Description: Resistance to crushing Method: TAPPI 825

ILT-U-342Determination in paper samples

Description: Traction; resistance to Taber flexion; adhesion between layers (Scott); and resistance to the passage of Gurley air Method: TAPPI 460, TAPPI 489,TAPPI 494, TAPPI 566, TAPPI 569

ILT-U-490Determination of grammage of the component papers after separation

Description: ISO 3039 Method: ISO 3039

ILT-U-492Determination of grease resistance – Part 1: Permeability test

Description: ISO 16532-1 Method: ISO 16532-1

ILT-U-493Determination of grease resistance – Part 2: Surface repellency test

Description: ISO 16532-2 Method: ISO 16532-2

ILT-U-494Determination of grease resistance – Part 3: Turpentine test for voids in glassine and greaseproof papers

Description: ISO 16532-3 Method: ISO 16532-3

ILT-P-02Determination of the edge crush resistance after laboratory fluting

Description: Method: ISO 16945

ILT-U-491Determination of the edge crush resistance after laboratory fluting. 0,1

Description: ISO 16945 Method: ISO 16945

ILT-U-1360Edge Crush determination

Description: Method: ISO 3037

ILT-U-1069Edge Crush Test in corrugated fibreboard

Description: Method: NBR 6737, NFH 13 001

ILT-U-2098Face mask determinations

Description: Flamability Method: ASTM F2100

ILT-U-1058Formaldehyde determination

Description: Formaldehyde determination Method: EN 1541

ILT-U-1167Microbiological determinations in tissue toilet paper

Description: Total plate count; and Mould and yeast Method:

ILT-U-1484Migration in containers

Description: Color migration in 3% acetic acid; Color migration in 10% ethanol; Humidity; Density; Specific migration of primary aromatic amine in 3% acetic acid; and Overall migration in 3% acetic acid Method: EN 646, EU 10/2011

ILT-U-1890Packed Products determinations. 1A

Description: Compression Test Method: ISTA 1C

ILT-U-1889Packed Products determinations. 1B

Description: Drop Test Method: ISTA 1B

ILT-U-137Paper and board — Determination of thickness, density and specific volume

Description: EN ISO 534 Method: EN ISO 534

ILT-U-2228Paper and board articles determination. PC

Description: Paper and board intended to come into contact with foodstuffs. Pentachlorophenol (PCP); Preserving effect; Extractable heavy metal (Pb, Cd, Hg) in cold water or hot water; and Fluorescent matter Method: Europe Council Resolution ResAP (2002)1

ILT-U-1070Paper and board determinations

Description: Determination of grammage; Determination of tensile properties Part 2: Constant rate of elongation method (20 mm / min); and Determination of resistance to traction of perforations – perforation efficiency calculation Method: ISO 12625-12, ISO 12625-4, ISO 12625-6, NBR ISO 12625-12, NBR NM ISO 1924-2, ISO 536

ILT-U-1144Paper and corrugated board determinations

Description: Bursting strength of paper; Bursting strength of board; Cobb Test; and Moisture Method: ISO 535, ISO 2758, ISO 2759, ISO 287

ILT-U-1376Paper determinations

Description: Water absorption capacity; Fibrous composition – Test method with Herzberg dye; Fibrous composition – Test method with Lofton-Merritt dye; Fibrous composition – Graff dye test method “C”; Fibre furnish analysis – General method; Determination of holes; Determination of pints; Diffuse reflectance factor in blue (ISO brightness; Dry tensile strength; Wet tensile strength; Water absorption time and capacity, basket immersion test method; and Paper weight for sanitary purposes Method: ISO 535, NBR NM ISO 1924-2, NBR 15010, ISO 2470, NBR 15134, NBR 14129, NBR 14133, NBR 14131, NBR 14132, NBR 8259, ISO 12625-8

ILT-U-190Paper determinations

Ring Crush of Paperboard, Roughness of Paper and Paperboard  (Sheffield Method), Resistance of paper to passage of air  (high-pressure Gurley method), Brightness of pulp, paper, and paperboard (directional reflectance at 457 nm). Accordimg to TAPPI T-818, TAPPI T-538, TAPPI T-536, TAPPI T-452

ILT-U-2392Paper determinations

Grammage, Caliper / Thickness,  Moisture Contents, Ash Contents, Tearing Strength, Tensile Strength, Bursting Strength. According to TAPPI T-403, TAPPI T-494, TAPPI T-414, TAPPI T-413, TAPPI T-412, TAPPI T-411, TAPPI T-410

ILT-U-160Paper determinations

Scott Bond, STFI Compression Test, Edgewise crush resistance of liner and corrugating medium (CCT), Flat crush of corrugating medium (CMT test), Water drop, Porosity – Gurley Method, Wax Extraction Test, Bekk Smoothness, Wax Pick Test, Gurley Stiffness. According to TAPPI T-543, TAPPI T-459, TAPPI T-479, TAPPI T-574, TAPPI T-460, TAPPI T-809, TAPPI T-824, TAPPI T-826, TAPPI T-569

ILT-U-144Paper determinations. Handsheets test.

Handsheets formed (5 sheets). According to TAPPI T-220

ILT-U-122Paper determinations. Optical test

Brightness, Opacity, Whiteness, Dirt in Pulp. Accordign to TAPPI T-562, TAPPI T-563, TAPPI T-425

ILT-U-2203PCB determination

Description: PCB content in paper and board Method: ISO 15318

ILT-U-2204PCP determination.

Description: PCP content. aper and board Method: ISO 15320

ILT-U-2127Random vibration

Description: 23°C and 50% RH. Vertical vibration – Test duration: 1 hour Method: ASTM D4728, ISO 13355

ILT-U-548Random Vibration Testing of Shipping Containers

Description: Method: ASTM D4728

, ILT-U-976Shipping containers and systems determination

Shipping Containers and Systems. Distribution Cycle 2 — Assurance Level II. Schedule B — Warehouse Stacking. Schedule C — Vehicle Stacking. According to ASTM D4169

, ILT-U-2252Shipping Containers determination

Description:
Standard :

ILT-U-1039Shock testing by free fall in packaging

Description: Shock testing by free fall. 10 drops – Height: 1.5 m. Verification: Damage of package / Functionality of content Method: ISO 2248, ASTM D5276

ILT-U-2126Sine vibration test

Description: 60 minutes. Verification: Damage of package / Functionality of content Method: ISO 8318, ASTM D999

ILT-U-1645Tissue determinations

Description: Grammage; dimension; pH; and visual inspection Method: ISO 536, GSO 143, SASO 1849

ILT-U-1766Total bacteria count in board

Description: Total bacteria count Method: ISO 8784

ILT-U-547Vibration Testing of Shipping Containers

Description: Method A1. 60 minutes. Verification: Damage of package / Functionality of content Method: ASTM D999

Category of Schemes
ILT – Interlaboratory Test
Scroll to Top
Cart
  • No products in the cart.