Select the program you want to quote. You can select different programs and they will be added in the lower floating button. When you finish choosing you can go to quote them.

CATEGORIESILT CODENAMESUMMARYSELECT
ILT-U-525Abrasion Resistance of Organic Coatings by the Taber Abraser

Description: Method: ASTM D4060

, ILT-U-2966Adhesive determination

Description:

Torque strength of adhesives using threaded fasteners. According to ASTM D5649


Standard :ASTM D5649,

, ILT-U-2965Adhesive determination

Description:

Shear strength of adhesives using pin-and-collar specimens. According to ASTM D4562


Standard :ASTM D4562,

, ILT-U-2964Adhesive determination

Description:

Shear strength of adhesives using lap-shear specimens. According to ASTM D1002


Standard :ASTM D1002,

ILT-U-2902Air determination

Description:

Particulate matter. According to EPA method 5


Standard :

ILT-U-2088Air Filter determinations

Description: Marking and labelling Method: SASO 932, GSO 1712

, ILT-U-2482Air filter determinations

Full life arrestance or “efficiency by weight”, capacity test for dry type automotive applications, Initial arrestance or “efficiency by weight”, for dry type automotive applications, and Full element pressure collapse test to 25″ pressure drop. According to ISO 5011

, ILT-U-2483Air filter determinations

Cabin Air Filter Efficiency and Capacity. According to ISO 11155-1

, ILT-U-2485Air filter determinations

Particle filtration (Passenger Compartment). According to DIN 71460-1

ILT-U-2396Air filters determinations

Air filters for general ventilation. According to ISO 16890-1

ILT-U-2420Air filters determinations

Gravimetric efficiency, air flow resistance vs. dust loading and dust holding capacity. According to ISO 16890-3

ILT-U-1016Alcohol absolute determination

Description: Ethanol content of 20 ° C; higher alcohols; METHANOL; aldehydes; ESTERS; ACIDITY; CONDUCTIVITY Method:

, ILT-U-3322Anaerobic Biodegradation of Plastic Materials determination

Description:

Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions. According to ASTM D5511


Standard :ASTM D5511,

, ILT-U-1295Automotive battery determination

Nominal Capacity test (C20)

, ILT-U-2584Baby carrier determination

Safety requirements and test methods. According to EN 13209-2

ILT-U-2270Ballistic determinations

Resistance level I-A, I-B, III-A, III-B, III-C, IV-A, IV-B, IV-C, V-A, V-C

ILT-U-2767Ballistic determinations

Description:

Resistance (9 mm Parabelellum FMJ). According to NIJ 0108.01 and NIJ III-A Part 2, NTC 5501


Standard :NTC 5501

ILT-U-293Benzene determination charcoal tubes

Description: NIOSH 1501 Method: NIOSH 1501

, ILT-U-2466Benzo [a] pyrene concentration determination

Benzo [a] pyrene concentration (µg/l). According to EPA 8310

, ILT-U-2585Bicycle determination

Static strength test. Test method for drive system with chain and belt, Drive Belt. Tension strength test, Crank assembly – Fatigue Test. Test method with the cranks at 45º to the horizontal. According to ISO 4210 Part. 8

, ILT-U-2592Bicycle determination

Description:

Handlebar and stem assembly - Fatigue test – Out-of-phase, Handlebar and stem assembly - Fatigue test – In-phase. According to ISO 4210-5


Standard :ISO 4210-5, ISO 4210,

, ILT-U-2593Bicycle determination

Description:

Bending fatigue test and rearward impact test. According to ISO 4210-6


Standard :ISO 4210,

, ILT-U-861Bicycle determinations

Static strength test, Impact test, Dynamic durability test. According to ISO 4210 part 8.

, ILT-U-2583Bicycle determinations

Falling mass (frame). According to ISO 4210 Part. 2

, ILT-U-2519Bronze Lock Key determination

Classification, designation, and hydrostatic pressure loss. According to EN 1213

ILT-U-1506BTEX determination in activated carbon

BTEX

, ILT-U-2495Building and transport products determinations

Non-combustibility test. According to ISO 1182

, ILT-U-2493Building materials determinations

Ignitability of products subjected to direct impingement of flame. According to ISO 11925-2

, ILT-U-2494Building products determinations

Reaction to fire tests. Sample tested fully adhered with PVA adhesive to a calcium silicate board. According to EN 13823

, ILT-U-3300Calcium Chloride determination

Description:

Calcium Chloride (Purity). According to ASTM E449


Standard :ASTM E449,

, ILT-U-114Calcium oxide determination

Description:

Calcium oxide content


Standard :

ILT-U-1565calorific value determination

Description: Determination of the gross heat of combustion Method: ISO 1716

, ILT-U-2896cannabinoids in oil determiantion

Description:

Cannabinoids in oil 


Standard :

ILT-U-1693Carbon determinations

Description: Iodine Number-Carbon Black; Oil Absorption Number; Crushed Oil Absorption Number; Tint Strength; Sieve Analysis-Carbon Black – 35 Mesh; Sieve Analysis-Carbon Black – 325 Mesh; Pellet Hardness; and N2SA/STSA Method: ASTM D6556, ASTM D1514, ASTM D3265, ASTM D2414, ASTM D1510, ASTM D5230, ASTM D3493

, ILT-U-2588Carry cot determination
Mechanical. According to EN 1466
ILT-U-2079Castors and wheels determination

Description: Castors and wheels Type U+ Type H Method: EN 15259

ILT-U-2077Castors and wheels determination. 1B

Description: Castor test Method: EN 12527, EN 12528

, , ILT-U-439Ceramic tiles determinations

Dimensions and surface quality, Water absorption, apparent porosity, apparent relative density and bulk density, Modulus of rupture and breaking strength, Resistance to deep abrasion for unglazed tiles, Resistance to surface abrasion for unglazed tiles, Crazing resistance for glazed tiles, Frost resistance, Chemical resistance, and Resistance to stains. Accroding to ISO 10545-2; ISO 10545-3; ISO 10545-4; ISO 10545-6; ISO 10545-7; ISO 10545-11; ISO 10545-12; ISO 10545-14; and ISO 10545-13 Method: ISO 10545-3, ISO 10545-4, ISO 10545-7, ISO 10545-13, ISO 10545-12, ISO 10545-14, ISO 10545-2, ISO 10545-6, ISO 10545-11

, , ILT-U-2508Ceramic tiles determinations

Determination of impact resistance by measurement of coefficient of restitution, and Small colour differences. According to ISO 10545-5, ISO 10545-16

ILT-U-2421Charcoal briquettes determination

Labeling. According to 16 CFR Part 1500.14

, ILT-U-3145Charcoal determination

Description:

Total moisture, Analytical moisture, Ash, Fixed carbon, Volatile substance. According to EN 1860-2



Standard :EN 1860-2

, ILT-U-3092Chemical determination

Description:

pH of aqueous solutions. According to ISO 4316 and ASTM E70


Standard :ASTM E70, ISO 4316

, ILT-U-2423Children’s folding chairs determination

Safety determinations. According to ASTM F2613 and 16 CFR 1232

ILT-U-1999Coal determinations

Description: Te and Sn elements Method:

ILT-U-1134Cobalt and Arsenic determination in human urine

Cobalt and Arsenic

ILT-U-1714Color difference and reflectance

Description: Color and reflectance (250nm to 2500nm) Method: ASTM E903

, ILT-U-3124Colorants determination

Description:

No visible migration, Metals and metalloids(Sb,As,Ba,Cd,Cr,Pb,Hg,Se), Unsulphonated Aromatic amines(aniline,benzidine,2-naphthylamine, 4-aminobiphenyl), Sulphonated Aromatic amines, Toluene extractives(only for carbon black), Polychlorinated biphenyls(PCB), Cadmium content. According to Council of Europe AP(89)1



Standard :Council of Europe AP(89)1

ILT-U-1898Colour Reference determination. OT

Description: Y, x, and y values Method: ASTM D6045, ASTM D1500

ILT-U-1653Connectors determinations

Description: Dimensional requirements; positive pressure liquid leakage; subatmospheric-pressure air leakage; stress cracking; resistance to separation from axial load; resistance to separation from unscrewing; and resistance to overriding Method: ISO 80369-7

ILT-U-1315Consistency of Paints Measuring Krebs Unit (KU) Viscosity

Description: Using a Stormer-Type Viscometer Method: ASTM D562

, ILT-U-2371Contents of elements in hay powder

Ca, K, Mg, P, S, Zn, I, N and Kjeldahl-N

, ILT-U-2903Cotton determinations

Description:

Yarn consistency index, Micronaire, Maturity, UHML length (Upper half media length), Uniformity index (%), Short fiber index (%), Resistance, Elongation, Reflectance, Yellowness, Color grade, Garbage Content, Garbage Area, and Garbage Grade. According to ASTM D5867



Standard :ASTM D5867,

, ILT-U-2318Covered kitchen recessed gas determinations

Gas circuit tightness test, Obtaining test of the nominal calorific consumption (work table), Test to obtain the minimum calorific consumption (work table), Performance test of gas appliance burners for cooking food (Work table), Oven Maintenance Consumption Test (Oven or grill)

ILT-U-518Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)

Description: Method: ASTM D5894

ILT-U-1272Cytotoxicity test in Suture thread

Description: Method: ISO 10993-5

, ILT-U-2411Detection of an antioxidant in polyolefin

Chimassorb 944 Antioxidant Detection. According to Freitag Method

ILT-U-3121Determination of Ambient Noise Levels

Description:

Noise Emission (Daytime and Nighttime), Environmental Noise (Daytime and Nighttime, Working and Non-working). According to Resolution 627 of 2006 MAVDT



Standard :

ILT-U-529Determination of brucellosis in bovine serum lyophilized

Description: Lyophilized Method: Lyophilized

ILT-U-1366Determination of Copper impurities.

Description: Determinations: Sb, Pb, Bi, Cu, Fe, As, In, Co, Zn, Ni, Al, S, Cd, Ag and others Method:

ILT-U-1401Determination of density in paints

Description: Density (Picnometric Method) Method: ISO 2811

ILT-U-1607Determination of dry thickness. OT

Description: Painted sheet sample Method: ASTM D5796

ILT-U-1929Determination of Ethylbenzene

Description: GC-mass, adsorbed on activated carbon tubes in air samples. Method:

ILT-U-1140Determination of resistance to humidity. OT

Description: Method: ISO 6270-2

ILT-U-1307Determination of silica in phosphoric rock

Description: Silicon Oxide (%SiO) – Gravimetric Method Method:

ILT-U-1311Determination of the mechanical properties off glass fibre meshes

Description: Method: EN 13496

, ILT-U-3287Determinations for certain substances, in electrotechnical products

Description:

Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS; Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS. According to IEC 62321-4 and IEC 62321-5



Standard :IEC 62321-5, EN 62321-5, IEC 62321-4, EN 62321-4

, ILT-U-3286Determinations for certain substances, in electrotechnical products

Description:

Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS), and Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS). According to IEC 62321-6 and IEC 62321-8



Standard :IEC 62321-6, EN 62321-6, IEC 62321-8, EN 62321-8

ILT-U-1588Determinations for environmental conditioning. 1A

Description: Determination of the steady state thermal resistance and related properties-Hot plate guard apparatus Method: NCh 850, ISO 8302

ILT-U-1602Determinations for environmental conditioning. 1B

Description: Determination of the thermal resistance in steady state and related properties-Calibrated thermal camera and guard Method: ISO 8990, NCh 851

ILT-U-1248Determinations in biomedical materials

Description: Determination of residual ethylene oxide; Determination of ethylene chlorohydrin and ethylene glycol, Method: ISO 10993-7

ILT-U-1489Determinations in expansible polyurethane

Description: Tear resistance in flexible polyurethane foam; and Tensile strength in flexible polyurethane foam. Method: NBR 8515, NBR 8516

, ILT-U-3117Determinations in fertilizers

Description:

Ca & Mg AOAC, Ca, Zn, Fe, Mg, Mn & Cu, Potassium as K2O, Phosphorus as P2O5, Determination of total N, Molybdenum, Boron, Sulfate, pH, Electrical conductivity, Density, Moisture



Standard :

ILT-U-1521Determinations in lithium brine

Description: Density at 25 °C; Calcium; Chloride; Copper; Total dissolved solids; Strontium; Sodium; Chrome; Sulfates; Iron; Aluminum; Lithium; Arsenic; Magnesium; Barium; Manganese; Lead; Zinc; Boron; and Potassium Method:

ILT-U-331Determinations in phosphate rock. OT

Description: Phosphorus Pentoxide (%P2O5); Silicon Oxide (%SiO); Fe2O3, Al2O3, MgO, K2O, Na2O, Cd, Sr, CaO; and Total chloride (ppm Cl) Method:

ILT-U-849Determinations in Refractory material. 1A

Description: Pyrometric cone equivalent; Continuous linear variation until 1300; Cold crushing strength dense shaped; Determination of refractoriness under load with rising temperature; and Resistance to thermal shock Method: EN 993-10, EN 993-11, EN 993-12, EN 993-5, ASTM C113, ASTM C1171, ASTM C24, EN 993-8

ILT-U-1904Determinations in Refractory Material. 1B

Description: Determination of cold crushing strength dense shaped refractory products. Method: EN 993-5

ILT-U-1485Determinations on health products

Description: Meter evaluation; Evaluation of mixers; Evaluation of showers; Evaluation of toilets; and Evaluation of intake and discharge valves Method: NOM-012-SCFI-1994, NOM-009-CONAGUA-2001, NOM-008-CONAGUA-1998, NOM-010-CONAGUA-2000, NMX-C-415-ONNCCE-2015

ILT-U-2048Disc Brake Pad determinations. 1A

Description: Compressibility – Cold – Hot and Heat Expansion; Bond Shear Strength; Internal Shear Strength after prolonged exposure to water, saline, lube oil, Brake Fluid; and Coeff. of Friction & Wear (KRAUSS TEST) Method: ISO 6310, ISO 6312, ISO 6313, ISO 6311, ISO 6314, SAE-J840, SAE-J2468, UNECE-R 90

ILT-U-2059Disc brake pad determinations. 1B

Description: VISUAL TEST & INSPECTION: Identification of defects by Physical examination and other simple tests like sound test, tap test, optical test. Method: IEC 22574

ILT-U-1380DNA Test – Mitochondrial DNA

Description: Analysis of Mitochondrial DNA, and includes a sequencing of hypervariable regions of mitochondrial DNA (maternal inheritance). The analysis includes the sequencing of the hypervariable regions HVI, HVII and HVIII of mitochondrial DNA. Method:

ILT-U-1378DNA Test – XSTR Markers

Description: analysis of genetic markers of the Short Tandem Repeat (STR) type located on the X chromosome (maternal inheritance in males, and bi-parent in females. The analysis includes the following 10 X-STRs: DXS8378, DXS9898, DXS7133, GATA31E08, GATA172D05, DXS7423, DXS6809, DXS7132, DXS9902, DXS6789. Method:

ILT-U-1379DNA Test – YSTR Markers

Description: analysis of genetic markers of the Short Tandem Repeat (STR) type located on the Y chromosome (paternal inheritance). The analysis includes the following 23 Y-STRs: DYS389II, DYS389I, DYS390, DYS193, DYS393, DYS392, DYS439, DYS437, DYS391, DYS385, DYS438, GATA H4, DYS456, DYS458, DYS635, DYS448, DY576, DY481, DY549, DY533, DY570 and DY643 (PowerPlex® Y23 System). Method:

ILT-U-1995Domestic cooking appliances burning gas determinations. OT

Description: Combustion and Consumption Method: EN 30-1-1

ILT-U-1400Drying, Curing, or Film Formation of Organic Coatings

Description: Curing, or Film Formation of Organic Coatings Method: ASTM D1640

ILT-U-857Durability of shock absorbers

Description: NBR 13308 item 4 Method: NBR 13308

, ILT-U-2641Elastomeric joint sealants determination

Description:

Bond Strength. According to ASTM C794


Standard :ASTM C794,

, ILT-U-2812Electric rigging (hoist) determination

Description:

Load test. According to ASME B30.16 (Clause 16.2.2)



Standard :

ILT-U-1734Engine and Exhaust Engine determinations

Description: Measurement of CO & HC; and Measurement of Engine Operation Efficiency Method: SASO 1284, GSO 971, SASO 267, GSO 40

, ILT-U-067Environmental determination

Description: ASTM E1086 and ASTM E415 Method: ASTM E415, ASTM E1019

, ILT-U-550Environmental determination

Description: Method: ASTM D638

ILT-U-2977Environmental determination

Description:

Total Particulate Matter NIOSH 0500, PM10 Particulate Matter CFR 40 Part 50 Ap. J, BTEX (Benzene, ethylbenzene, toluene, xylene) ASTM D3687, Determination on iron filter and Determination on manganese filter NIOSH 7303 EAA



Standard :CFR 40 Part 50, NIOSH 7303, NIOSH 500, [:en]ASTM D3687[:],

ILT-U-3137Environmental determination

Description:

PM10 Particulate Matter. According to CFR 40 Part 50 Ap. J


Standard :CFR 40 Part 50

ILT-U-642Environmental determinations

Description: Chlorides; Sulfates; Total dissolved solids; Total Suspended Solids; % Humidity; Reactive Phosphorus / Phosphates; Determination of elements by ICP (Li, Ca, Mg, B, Na, K, Ba, Sr, Fe, and Mn); Conductivity; pH; Density; Carbonates; Bicarbonates; Hydroxides; Total alkalinity; and Hardness Method:

, ILT-U-2465Environmental determinations

Benzene in carbon tubes. According to NIOSH 1501

, ILT-U-2590Epoxy Coating determination

Description:

Thermal analysis of epoxy and cured epoxy coating film using DSC. According to ISO 21809-1


Standard :ISO 21809-1,

ILT-U-1900Ethanol determination. OT

Description: 40 % ABV (Alcohol by Volume). Method:

ILT-k-05Ethanol determinations. Water impurities, sulphur, chlorides, sulfates, and density.

Description: EN 15489; EN 15486; EN 15492 and ASTM D4052 Method: EN 15486, EN 15489, EN 15492, ASTM D4052

ILT-U-879Fertilizer determinations.

Description:

Total phosphorus, Total potassium, Available potassium, Total calcium, Full copper, Total iron, Total magnesium, Total manganese, Total zinc, Total boron, Total sulfur, Total Nitrogen, Total humidity, Cadmium, Lead, Mercury, Arsenic, Chrome



Standard :

, ILT-U-3324Fertilizers determinations

Description:
Standard :DM 17/06/2002, DM 24/03/1986, EN 16963, EN 16962,

ILT-U-959Fertilizers determinations, 1A

Description: 1-naphthylacetamide; 2,4, -D; 4-CAP; 6-benzyladenine; 1 naphthylacetic acid; 3- indolacetico; 3indolbutirico acid; gibberellic acid; MCPA sum; MCPA; MCPB; forchlorfenuron; and vitamin B1 Method:

ILT-U-1040Fertilizers determinations. 1B

Description: Bifenthrin 10 E.C. – Active content; and Methoxyfenoxide 240 g/lit SC – For Active content and suspensibility test. Method:

ILT-U-529Film Hardness by Pencil Test

Description: Method: ASTM D3363

ILT-U-1047Film thickness measurement in paints and varnishes

Description: Method 6a. Method:

, ILT-U-2313Fire extinguishers determination

force test

ILT-U-1384Fire extinguishing powder determination

Description: Humidity Method:

ILT-U-1899Flash Point determination. OT

Description: Using Procedure A and corrected for the barometric pressure at time of determination. (Nominal value: 175.0 °C) Method: ASTM D93

ILT-U-146Flatwise Tensile of Sandwich Core Materials. OT

Description: Method: ASTM C297

ILT-U-2118Flexible and Rigid Insulated Temporary By-Pass Jumper. OT

Description: Flexible and Rigid Insulated Temporary By-Pass Jumper determinations Method: ASTM F2321

, ILT-U-2502Floor covering material determination

Reaction to Fire test for floor covering. RFP Test (Radiant Panel). According to ISO 9239‐1

, ILT-U-2378Fluorine determination in clay

Fluorine

, ILT-U-2901Foliar determinations

Description:

Dry matter, and Metals (B, Ca, Cu, Fe, K, Mg, Mn, Na, P, S)



Standard :

, ILT-U-3022Foliar determinations

Description:

Calcium, Cooper, Zinc, Iron, Magnesium, Manganese, Potassium, Sulfur, and Phosphorus. According to Atomic absorption


Standard :

, ILT-U-2448Fuel filter determination

Particle counter test. According to ISO 19438

, ILT-U-2449Fuel filter determination

Water separation test. According to ISO 16332

, ILT-U-2450Fuel filter determination

Collapse test. According to ISO 4020

, ILT-U-2451Fuel filter determination

Impulse test. According to ISO 4020

, ILT-U-2398Fuel filter determinations

Verification of Fabrication Integrity and First (Bubble Point). ISO 4020 clause 6.2

ILT-U-2060Full-flow lubricating oil filters for internal combustion engines

Description: Differential pressure/flow characteristics Method: ISO 4548-1

ILT-U-2065Full-flow lubricating oil filters for internal combustion engines. 1A

Description: Filtration efficiency using particle counting and contaminant retention capacity Method: ISO 4548-12

ILT-U-2062Full-flow lubricating oil filters for internal combustion engines. 1B

Description: Hydraulic pulse durability test, and Cold start simulation test Method: ISO 4548-5

ILT-U-2064Full-flow lubricating oil filters for internal combustion engines. 1C

Description: Inlet anti-drain valve test Method: ISO 4548-9

ILT-U-2061Full-flow lubricating oil filters for internal combustion engines. 1D

Description: Element by-pass valve characteristics Method: ISO 4548-2

ILT-U-3288Fusion bonded epoxy powder determination

Description:

Gel Time, Moisture Analysis, Thermal Analysis, DSC Cure Test (ΔTg), Cathodic Disbondment Test. According to API RP 5L 7, CSA Z245.20:14, CSA Z245.20:22



Standard :API RP 5L 7, CSA Z245.20:14, CSA Z245.20:22

ILT-U-3289Fusion bonded epoxy powder determination.

Description:

Pull-Off Adhesion Test, Hot Water Soak at 75°±3°C, Hot Water Soak at 95°±3°C, Cross Section Porosity. According to API RP 5L 7, CSA Z245.20:14, CSA Z245.20:22, ASTM D 4541



Standard :API RP 5L 7, CSA Z245.20:14, CSA Z245.20:22, ASTM D4541

ILT-U-2816Gas appliances for cooking determinations

Description:

Functional safety test. Resistance to overheating (worktable) and Functional safety test. Resistance to overheating (oven or grill). According to NTC 2832-1 



Standard :NTC 2832-1,

ILT-U-2817Gas appliances for food cooking determinations

Description:

Performance test of gas appliance burners for cooking food and Oven maintenance consumption test. According to NTC 2832-2


Standard :NTC 2832-2,

ILT-U-2818Gas applicances for food cooking determinations

Description:

Artifact labeling indelibility test, Test of protection against access to live parts with the test finger, Protection test against access to live parts with the test needle, and Test of protection against access to live parts with the conical gauge. According to NTC 2183, NTC 2386,  NTC 4982



Standard :NTC 2183, NTC 2386, NTC 4982,

ILT-U-2819Gas applicances for food cooking determinations

Description:

Leakage current test, and Dielectric strength test. According to NTC 2183, NTC 2386



Standard :NTC 2183, NTC 2386,

ILT-U-2753Gas grill determination

Description:

Performance characteristics and Test methods. According to EN 498


Standard :EN 498,

, ILT-U-2317Gas step Heater determinations

Gas circuit tightness test, Nominal calorific consumption test, Minimum calorific consumption test, Rational use of energy test. Performance, Performance characteristics test. Useful, nominal and minimum powers, Performance characteristics test. Automatic gas operated valve by high and low pressure water

ILT-U-1652Gas-fired central heating boilers determinations

Description: Performance 100% and performance 30% Method: EN 297, EN 625

, ILT-U-063Geomembrane determination

Description:

Peeling test, Shear test, Checking the tightness of extrusion welds by vacuum testing, Fault detection test in extrusion welds using a field spark gap meter, Checking the tightness of thermofusion welds by air channel method. According to ASTM D6392, ASTM D5641, DVS 2225-2, UNE 104425, ASTM D6365, ASTM D5820, ASTM D4437, UNE 104481-3-2


Standard :ASTM D6392, ASTM D5641, DVS 2225-2, UNE 104425, ASTM D6365, ASTM D5820, ASTM D4437, UNE 104481-3-2

, ILT-U-2632Geotextile determination

Description:

Root resistance test. According to PD CEN/TS 14416


Standard :PD CEN/TS 14416,

, ILT-U-2613Geotextile determination

Description:

Impact Resistance (Hard Support), Impact Resistance (Soft Support). According to BS EN 12691


Standard :BS EN 12691,

, ILT-U-2633Geotextile determination

Description:

Tear Resistance (Nail Shank). According to BS EN 12310-1


Standard :BS EN 12310-1,

ILT-U-2372Glass determinations

Chemical composition

ILT-U-2083Glass in building

Description: Glass fragmentation Method: EN 12150

ILT-U-1252Glow discharge optical emission spectroscopy

Description: Method: ISO 14707

, ILT-U-2681Gold plated ring determination

Description:

Macrographic examination with a binocular magnifying glass. According to NF S80-772


Standard :NF S80-772,

, ILT-U-2680Gold plated ring determination

Description:

Macrographic examination with a binocular magnifying glass. According to ISO 3160-2


Standard :ISO 3160-2,

, ILT-U-2915Helmet determinations

Description:

Materials, Construction, Durability, Chinstrap, Closing device, Colour, pH, Inspection and determination of mass, Pre-conditioning high Tª + 50ºC, Low temperature conditioning -20ºC, Artificial aging, shock absorption capacity, Resistance and ease of opening of the retention system, Retention system effectiveness, and Vision field. According to EN 1078



Standard :EN 1078,

, ILT-U-2912Helmet determinations

Description:

Mechanical, physical and practical performance test, and visual inspection. According to EN 1384


Standard :EN 1384,

ILT-U-2028HF (Halogen) in semiconductor device determination. OT

Description: HF (Halogen) Method: EN 14582

, ILT-U-2414Hydraulic Abrasion Resistance determination in polyester geotextile

Hydraulic Abrasion Resistance. According to Draft ISO Standard based on German BAW Procedure

, ILT-U-2397Hydraulic filter determinations

Verification of Fabrication Integrity and First (Bubble Point). ISO 2942

ILT-U-1383Implants for surgery

Description: Surfactants Method:

, ILT-U-2575Implants for surgery determination

Bending Fatigue, Torsion (STATIC), Driving Torque (STATIC), Pullout, Compression Bending (STATIC), Compression Bending (FATIGUE). According to ASTM F384, ASTM F543, ISO 14801

ILT-U-305Indirect food additives (Polymers) determination
Indirect food additives (Polymers). According to 21 CFR Part 177.1010
, , , ILT-U-2531Industrial hygiene services determination

Analysis for total particles, Analysis for respirable particles. According to NIOSH 500, NIOSH 600

ILT-U-2071Inner tube determinations

Description: Tensile & Elongationñ and Ageing Test Method: JIS D4231

, ILT-U-2976Insects’ determination

Description:

Insects. According to FDA ORA Laboratory Manual Vol. IV. Section 4 -2.3.2. (V-M) 2020. Microanalytical & filth analysis.


Standard :

ILT-U-1987Ladder determinations. OT

Description: Method: EN 131-2

ILT-U-2802Lawn mower with internal combustion engine determination

Description:

Functionality and safety of control and signaling elements: location, operation, effectiveness, and dimensions. According to ISO 5395-2


Standard :ISO 5395-2,

ILT-U-2804Lawn mower with internal combustion engine determination

Description:

Safety during changes of "transport-work" positions and during transport: dimensions, transport clearance, physical loads when changing positions "transport-work". According to ISO 5395-2


Standard :ISO 5395-2,

ILT-U-2803Lawn mower with internal combustion engine determination

Description:

Physical loads - forces actuating control elements, adjustments and maneuvering handles as well as forces necessary for the use and operation of the machine (without testing the forces on the steering wheel).  According to ISO 5395-2


Standard :ISO 5395-2,

ILT-U-2130Lead acid automotive battery

Description: Automotive Electrical System Battery Method: GSO 35, GSO 34, SASO 1920, SASO 1919

ILT-U-303Lead determination in paint/coatings and substrates

Lead in paint/coatings and substrates (polymeric). According to ASTM F2853

ILT-U-974Lead glass determinations

Chemical composition, Density, Refractive index value

ILT-U-1177Lead in paint determination. 1A OT

Description: Method AOAC 974.024 / ICP. Method: 16 CFR Part 1303

ILT-U-1687Lead in Paint determination. 1B

Description: Galvanized Steel and Pre-painted Galvanized Steel, samples Method: ASTM E1613

, ILT-U-3302Lighters determiantions

Description:

All determinations. According to IRAM 3980


Standard :IRAM 3980,

, ILT-U-3077Linear Alkyl Benzene Sulfonic Acid (LABSA) determination

Description:

Content of LABSA. According to IS:8401 (volumetric Method)



Standard :[:en]IS 8401[:]

ILT-U-1174Linear Alkyl Benzene Sulphonic (LABSA) determinations

Description: Linear Alkyl Benzene Sulphonic acid (LABSA): Active matter and Free Oil (Non Detergent Organic matter) Method: ASTM D3049, IS 8401

ILT-U-2796Liquid fuel pumps determination

Description:

Temperature of hot surfaces. According to EN 809


Standard :EN 809,

, ILT-U-2447Lube filter determination

Particle counter test. According to ISO 4548-12

ILT-U-1020Lubricating oil determinations. OT

Description: Flash Point -Miniflash; Total Neutralized Acid; Kinematic viscosity; Total Neutralised Base; Infra-red; and Particle Counting Method: ASTM D7596, ASTM D445, ASTM D664, ASTM D6450, ASTM D2896, ASTM E2412

ILT-U-470Mandrel Bend Test of Attached Organic Coatings

Description: Method: ASTM D522

, ILT-U-3318Marine sediments determination

Description:

Wentworth scale granulometry and Total organic matter. According to NTP 339.128, ASTM D2974



Standard :, NTP 339.128, [:en]ASTM D2974[:]

, ILT-U-3348Mattress determiantion

Description:

Rebound force. According to NBR 9176


Standard :NBR 9176,

, , ILT-U-3349Mattress determination

Description:

Determination of resilience. According to ABNT NBR 13579-1


Standard :NBR 13579-1, , [:en]API 1104[:]

, ILT-U-3346Mattress determination

Description:

Density. According to ABNT NBR 13579-1


Standard :NBR 13579-1,

, ILT-U-3347Mattress determination

Description:

Dynamic Fatigue. According to NBR 9177


Standard :NBR 9177,

, ILT-U-3350Mattress determination

Description:

Ash Content. According to ABNT NBR 13579-1


Standard :NBR 13579-1,

, ILT-U-2919Medical device determiantion

Description:

Bioburden – Microbial cleanliness. According to ISO 11737-1


Standard :ISO 11737-1,

, ILT-U-2442Medical device determinations

Chemical characterization (suture thread). According to ISO 10993-18

, ILT-U-2645Membrane determination

Description:

Dimensional stability. According to ASTM D6207


Standard :ASTM D6207,

, ILT-U-401Mercury determination in batteries (button cell)

Mercury in batteries (button cell)

ILT-U-863Metal determinations in fertilizers

Description: Zinc , Potassium, Calcium, Copper, Manganese, Phosphorus, Iron, Nickel, Cobalt, and Boron Method:

ILT-U-1695Metals and metalloids determination

Description: Metals and metalloids Method: GMC 15

ILT-U-944Metals determinations in air sample

Description: Lead and Metals Method:

, ILT-U-2379Migration of elements in Pigments

Migration of the elements (arsenic, cadmium, zinc, mercury, lead, selenium, chromium, antimony and barium) determination, with 0.1M hydrochloric acid solution in powdered pigment sample

, ILT-U-2404Military equipment determination

Fungal resistance. MIL-STD-810G section 508.7 method

ILT-U-086Moisture and Ash in tobacco products

Moisture and ash

ILT-U-927Moisture content in charcoal briquettes. OT

Description: Method: EN 1860-2

ILT-U-3139Natural gas regulator determination

Description:

Regulator outlet pressure set point verification, Relief valve performance test, Hermetic test, Block verification test, Hysteresis test, and Flow capacity test. According to NTC 3727



Standard :NTC 3727

ILT-U-205Needle attachment tests

Needle attachment tests. According to USP 871

, ILT-U-2933Needles determination

Description:

Needle Bonding Strength Test and Needle Penetration and Drag Force Test. According to ISO 7864



Standard :ISO 7864,

ILT-U-1831NOx reduction agent AUS 32 determination

Description: Urea Content; Density@ 20 deg.; Refractive Index; Alkalinity; Biuret content; Insoluble Matter content; Identity (FTIR); Aldehyde Content; Phosphate content; Elemental Analysis : (Elemental Contamination); Calcium; Iron; Copper; Zinc; Chromium; Nickel; Aluminium; Magnesium; Sodium; and Pottasium Method: ISO 22241-2

ILT-U-1573Object color evaluation in Paints

Description: Spectrometric data for object-color evaluation and calculation of color tolerances and color differences from instrumentally measured color coordinates Method: ASTM E1164, ASTM D2244

ILT-U-1963Oil adsorption determination

Description: Oil Adsorption Method: ASTM D281

ILT-U-2070Oil Filter determinations

Description: Full-flow lubricating oil filters for internal combustion engines Part 6: Static burst pressure test Method: ISO 4548-6

, ILT-U-2982Organic compound vapors determinations

Description:

BTEX (Benzene, Ethylbenzene, Toluene, Xylene). According to ASTM D3687


Standard :[:en]ASTM D3687[:],

, ILT-U-2413Oxidation Resistance - 25 year attestation determination in polyester geotextile

Oxidation Resistance – 25 year attestation. According to ISO 13438

ILT-U-522Oxygen gas transmission rate determination

Description: Method: ASTM F1227

, ILT-U-2921Paint determiantion

Description:

Intumescent paint inspection. Accordign to Nch 3040


Standard :Nch 3040,

ILT-U-073Paint determination

Description:

Scratch resistance. According to ISO 1518-1


Standard :, ISO 1518-1

ILT-U-2441Paint determination

Scrub Resistance of Wall Paints. According to ASTM D2486

ILT-U-2846Paint determination

Description:

Resistance of paint films and related coatings to fungal defacement by accelerated four-week agar plate Assay. According to ASTM D5590 


Standard :ASTM D5590,

ILT-U-2847Paint determination

Description:

Resistance of paint films and related coatings to algal defacement. According to ASTM D5589 


Standard :ASTM D5589,

ILT-U-2848Paint determination

Description:

Resistance of synthetic polymeric materials to fungi. According to ASTM G21


Standard :ASTM G21,

ILT-U-2849Paint determination

Description:

Resistance of emulsion paints in the container to attack by microorganisms. According to ASTM D2574



Standard :ASTM D2574,

ILT-U-3316Paint determination

Description:

Fineness of grind. According to ISO 1524


Standard :ISO 1524,

ILT-U-3362Paint determination

Description:

Specific Mass - Volumetric Method, according to NBR 5829:2014


Standard :NBR 5829,

ILT-U-3361Paint determination

Description:

Lead Content by Plasma Emission Spectrometry (ICP/OES) 


Standard :

ILT-U-3315Paint determination.

Description:

Evaluating drying or curing during film formation of organic coatings using mechanical recorders. According to ASTM D5896


Standard :ASTM D5896,

ILT-U-3317Paint determination.

Description:

Specular gloss of non-metallic paint films at 20°, 60° and 85°. According to ISO 2813


Standard :ISO 2813

ILT-U-2500Paint determinations

Thickness. According to Nch 3040

ILT-U-3365Paint determinations

Description:

Specific mass of paints for non-industrial buildings. According to NBR 15382


Standard :NBR 15382,

ILT-U-1648Paint determinations. 1A

Description: VOC; heavy metals (Pb, Cr, Cd, Sb, Hg & As); chemical resistance; and aromatic hydrocarbon Method: ISO 11890-1, WL-IP-028, ASTM D3257, ASTM D1308

ILT-U-1516Paint determinations. 1B

Description: Density; pH; and Non-volatile-matter content Method: ISO 2811, ISO 787-9, ISO 3251

ILT-U-1688Paint dry film thickness determinations

Description: Galvanized Steel and Pre-painted Galvanized Steel, samples Method: ASTM D5796

ILT-U-187Paints and varnishes

Description: Cross-cut test, Determination of film thickness Method: ISO 2409

ILT-U-887Paints and Varnishes determination

Description:

Resistance to liquids. Spotting Method (Calcium Hydroxide). According to ISO 2812-4



Standard :ISO 2812-4, ISO 1518-1

ILT-U-1098Paints and Varnishes determination

Bend Test (Cylindrical Mandrel)

ILT-U-2914Paints and varnishes determination

Description:

Contrast ratio of light-coloured paints at a fixed spreading rate. According to EN 6504-3, and Wet-scrub resistance and cleanability of coatings. According to ISO 11998



Standard :EN 6504-3, ISO 11998,

ILT-U-2024Paints and varnishes determination. 1B

Description: Film thickness Method: ISO 2178

, ILT-U-2343Pallet plastic determinations

Stacking, Forklifting, Block Compression, Racking Tests

ILT-U-1377Parental DNA Test

Description: analysis of genetic markers of the Short Tandem Repeat type (STR) located on autosomal chromosomes (biparental inheritance). The analysis includes the following 32 STRs: D3S1358, THL1, D21S11, D18S51, vWA, D8S1179, TPOX, FGA, D5S818, D13S317, D7S820, D16S820, D16S539, CSF1PO, Amylogenin, PENTA_E, PENTA_D, D2S1338, D19S433, D1S1656, D12S391, D2S441, D10S1248 and D22S1045 (Powerplex Fusion System) and D7S1517, D3S1744, D2S1360, D6S474, D4S2366, D8S1132, D5S2500, D21S2055, D10S2325 and SE33 (HDPlex). Method:

, ILT-U-2881PCBs determination

Description:

PCBs Content. According to ASTM D4059


Standard :ASTM D4059,

ILT-U-2332Pedestal wash basins determinations

Diameter of the tap hole, Horizontal distance between the centre line of the tap hole to the edge of the bowl, Width of the flat plane of the tap platform from the centre of the tap hole to the back edge of the flat plane, Distance form the centre line of the tap hole to the backwall

ILT-U-3128Phosphoric rock determination

Description:

Cadmium. According to Calcination, dissolution in acid and atomic absorption


Standard :

ILT-U-569Physical determinations in tobacco products

Description: Method: ISO 6565, ISO 2971

, ILT-U-392Polyoxymethylene homopolymer determination

Polyoxymethylene homopolymer. According to 21 CFR 177.2480

ILT-U-929Porosity analysis of Carbon black

Description: 40 – Point analysis – (Nitrogen Gas) Method: ASTM D4641

ILT-U-930Powder flowability study

Description: Freeman technologies FT4 Powder rheometer Method:

, ILT-U-3088Printing Ink determination

Description:

Nonvolatile Content of Heatset and Liquid Printing Ink Systems. According to ASTM D4713


Standard :ASTM D4713

, ILT-U-3242Protected eye determination

Description:

Field of vision checks on lenses, visors and protective masks, High-speed, Drop test – penetration, Dust Test, Against gas – fine particles, Ignition. According to EN 168 - EN 174, ISO 18526-3, ANSI Z87, ISO 12311


Standard :ANSI Z87, ISO 18526-3, ISO 12311, EN 174, [:es]EN 168[:]

, ILT-U-3254Protected eye determination

Description:

Transmittance test, Impact – drop test and High speed, Corrosion test, Droplet and Splash test, Ignition test, Lateral protection test, Fine dust particle test (ammonia gas), Dust test (coast particles), 

Field of vision check on lenses. According to EN 168, ANSI Z87


Standard :ANSI Z87, [:es]EN 168[:]

ILT-U-3134Pump determination

Description:

Acceptance hydraulic performance. Grade 1, 2, and 3. According to ISO 9906


Standard :

ILT-U-1917Qualitative analysis of solvents mixture

Description: GC/MS Scan Industrial. EPA 8015 Method D Method: EPA 8015

ILT-U-2373Rare element value in Duck-Weed (aquatic plant)

Ce, Dy, Er, Eu, Gd, Ho, La, Lu, Nd, Pr, Sc, Sm, Tb, Tm, Y, Yb, Th, U

, ILT-U-2374Rare element value in estuarine sediments

Ce, Dy, Er, Eu, Gd, Ho, La, Lu, Nd, Pr, Sc, Sm, Tb, Tm, Y, Yb, Th, U

, ILT-U-2377Rare element value in mussel tissue (Mytilus edulis)

Ce, Dy, Er, Eu, Gd, Ho, La, Lu, Nd, Pr, Sc, Sm, Tb, Tm, Y, Yb, Th, U

ILT-U-834Reaction to fire determination in construction products and building elements. OT

Description: Classification to the Reaction to Fire, performing the following test: Determination of gross combustion heat (Calorific value), and Non-combustibility test Method: EN 13501-1, ISO 1716, ISO 1182

, , ILT-U-2751Residential space heating appliances fired by wood pellets determination

Description:

Performance tests at rated power, Reduced power, Temperature safety test, NOx emissions (according to D.2.3), VOCs (annex E), and particles (heated filter, point F.2), Electrical consumption (nominal power, reduced power and standby). According to EN 15456, EN 16510-1, EN 14785


Standard :EN 15456, EN 16510-1, EN 14785,

ILT-U-522Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)

Description: Method: ASTM D2794

, ILT-U-3209Respiratory protective devices determination

Description:

Breathing resistance. According to EN 13274-3 and EN 1827


Standard :ISO 18219-1, EN 13274-3

ILT-U-858Rock phosphate determinations

Description: Phosphorus pentoxide (%P2O5); Silicon oxide (%SiO); and Fe2O3, Al2O3, MgO, K2O, Na2O, Cd, Sr, CaO Method:

, , ILT-U-053RoHS2 determination

lead, cadmium, mercury, chromium and bromine by XRF spectroscopy ). RoHS2

, ILT-U-2501Roofing material determinations

External fire exposure to roofs. According to CEN/TS 1187 (test 2)

, ILT-U-2446Roomheaters fired by solid fuel determination

Description:

Performance tests at rated power, NOx emissions (according to D.2.3), VOCs (annex E), and particles (heated filter, point F.2). According to EN 13240, EN 16510-1


Standard :EN 16510-1,

ILT-U-1732Rotational Viscosity determination

Description: corrosion inhibitor Method: ISO 3219

ILT-U-2299Sanitary tapware determinations

Description:
Standard :

, ILT-U-2999Sexual enhancer determination in honey

Description:

Sildenafil, Tadalafil, and Vardenafil


Standard :

ILT-U-1065Sieve residue analysis in construction plaster. OT

Description: Sieve residue analysis (clause 4.1.3) Method: EN 13279-2

, ILT-U-2589Slings determination

Mechanical. According to CEN TR 16512

ILT-U-1849Specific Migration of PAH and formaldehyde and acetaldehyde. OT

Description: Specific Migration of PAH (Deionized Water, or 3% Acetic Acid, or Olive Oil) and specific migration of formaldehyde and acetaldehyde (Deionized Water, and 3% Acetic Acid) Method: EN 13130-1

, ILT-U-535Specular Gloss

Description: Method: ASTM D523

ILT-U-516Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting

Description: Method: ASTM D1894

, ILT-U-2541Sulphuric Acid determination

Sulphuric Acid 98%. Acidity, Iron Content, Specific Gravity, Manganese, Chloride. According to IS: 266:1993.

, ILT-U-2956Sun protection factor determination

Description:

Type of sun protection (SPF) (Category: ˂14.9 / 15-29.9 / 30-59.9 / 60+) In-vivo test (10 subjects). According to ISO 24444



Standard :ISO 24444,

, ILT-U-2957Sun protection fator, water resistant determination

Description:

Water resistance testing (SPF water resistance 40 min) In-vivo test (10 subjects). According to ISO 24444


Standard :ISO 24444,

ILT-U-194Suture Tensile Tests Knotted

Suture Tensile Tests Knotted. According to USP 881

ILT-U-1621Swabs & Surfaces determinations

Description: Aerobic mesophilic (total count); Salmonella (Absence/presence); and Escherichia Coli O157 H7 (Absence/presence) Method:

, ILT-U-2932Syringes determination

Description:

Air Leakage Test, Forces Required to Operate the Piston, Liquid Leakage Test, and Dead Space Test. According to ISO 7886-1 



Standard :ISO 7886-1,

ILT-U-1689T Bend Adhesion of paint determinations

Description: Galvanized Steel and Pre-painted Galvanized Steel, samples Method: ASTM D4145

, ILT-U-2517Tap mixer kitchen countertop determination

Dimensional. Flowrate. According to EN 200

ILT-U-833Tensile strength parallel to faces in thermal insulating products for building applications.

Description: Method: EN 1608

ILT-U-237Test Method for 90 Degree Peel Resistance of Adhesives. OT

Description: ASTM D6862 Method: ASTM D6862

ILT-U-1332Thermal insulating products determination

Description: Determination of bending behavior; Determination of deformation under specified compressive load and temperature conditions; and Determination of compression behavior Method: EN 826, EN 1605, EN 12089

ILT-U-831Thermal resistance and thermal conductivity in thermal performance of building materials and products.

Description: Method: EN 12667

, ILT-U-2518Thermostatic mixing valve determination

Marking and dimensional. Flowrate. Sensitivity. Fidelity. According to EN 817

ILT-U-635Tile adhesives determination

Description: Initial adhesion with different adhesive products provided for placement: C1, C2, D1, D2, R or mortars, Method: EN 12004

ILT-U-1087Total and external surface area by nitrogen adsorption

Description: Carbon black Method: ASTM D6556

ILT-U-1132Total N, P2O5, K2O determinations in liquid fertilizer (Vinasse)

Description: Vinasse sample Method:

, ILT-U-3327Transformer Oil deteremination

Description:

Color, appearance, breakdown voltage, water content, interfacial tension, acidity, DDF, furan compounds. According to IEC 60296


Standard :IEC 60296,

, ILT-U-3326Transformer Oil determination

Description:

Dissolved gas analysis. According to IEC 60567


Standard :IEC 60567,

ILT-U-2041Transformer oil determination. 1A

Description: Dissipation factor (delta tangent at 90º) Method: ASTM D924

ILT-U-2040Transformer oil determination. 1B

Description: Neutralization number analysis Method: ASTM D664

ILT-U-2039Transformer oil determination. 1C

Description: Particle count and resulting ISO code Method: ISO 4406

ILT-U-2038Transformer oil determination. 1D

Description: Corrosive sulfur (Method B) Method: ASTM D1275

ILT-U-2037Transformer oil determination. 1E

Description: DBPC Inhibitor content Method: ASTM D4768

ILT-U-2036Transformer oil determination. 1F

Description: Interfacial tension measurement Method: ASTM D971

ILT-U-2032Transformer oil determination. 1G

Description: Dissolved Gas Method: ASTM D3612

ILT-U-2033Transformer oil determination. 1H

Description: Products of the degradation of cellulosic materials Method: ASTM D5837

ILT-U-2034Transformer oil determination. 1J

Description: PCBs content Method: ASTM D4059

ILT-U-2035Transformer oil determination. 1K

Description: Moisture content Method: ASTM D1533

ILT-U-1201Triterpene glycosides (HPLC) determination

Triterpene glycosides

ILT-U-751True density determination

Description: Accupyc II – True density (non-metal powder) Method: ASTM B923

ILT-U-1441Urethane foam determination. 1A

Description: Method E – Tensile Strength / Elongation Method F – Tear Strength Method G – Air Flow Method H – Ball Rebound Test Method: ASTM D3574

ILT-U-1442Urethane foam determination. 1B

Description: Method A – Density Method B1 – Hardness Method D – Compression Set at 50% Deflection Method: ASTM D3574

ILT-U-1641Urine determinations

Description: 2,5 Hexanodione; muconic acid; orto-cresol; and acid methyl hippuric Method:

, ILT-U-416Use of impact-resistant lenses determination

Use of impact-resistant lenses. According to 21 CFR Part 801.410

, ILT-U-3306Utility lighters determiantions

Description:

All determiantions. According to ISO 22702


Standard :ISO 22702,

, ILT-U-2412UV Resistance determination in polyester geotextile

UV Resistance – 500 hr w/baseine and post-exposure tensile. According to ASTM D4355

, ILT-U-1552Volumetric expansion determination

Description:

Volumetric expansion by water jacket. According to NTC 5171 Section 5, and NTC 2699 Annex E.3.



Standard :NTC 5171, NTC 2699

, ILT-U-2886Water heater determination

Description:

Thermal efficiency. Storage water heater (LP Gas). According to NOM-003-ENER-2021 Clause 8.5



Standard :NOM-003-ENER-2021,

, ILT-U-2642Waterproofing membranes determination

Description:

Hydrostatic Pressure. According to ASTM D5385


Standard :ASTM D5385,

ILT-U-2297WC determinations

Description:
Standard :EN 14055

ILT-U-2296WC determinations

Description:
Standard :EN 997

, ILT-U-2515WC pans determinations

Water absorption, Hydraulic seal discharge and height. According to  EN 997

, ILT-U-2047Wheels determination. 1A

Description: Impact test (single Hit) Method: ISO 7141

, ILT-U-2046Wheels determination. 1B

Description: Radial fatigue test (600.000 cycles) and Cornering Fatigue Test (50.000 cycles) Method: ISO 3006

, ILT-U-2375White cabbage elements value

Cd, Cu, Fe, Mn, Mo, Ni, Sr, Zn, Hg, Sb, Tl

, ILT-U-2376White clover elements value

As, Co, Mo, Se

ILT – Interlaboratory Test
Scroll to Top
Cart
  • No products in the cart.
  • Determination of Total Extractives from water and n-Hexane for rubber articles use as food contacting material USD$0.00
    SKU:
    ILT-U-1846