Select the program you want to quote. You can select different programs and they will be added in the lower floating button. When you finish choosing you can go to quote them.

CATEGORIESILT CODENAMESUMMARYSELECT
ILT-U-2934AASS- Acetic Acid Salt Spray Test determination

Description:

AASS. Presence of corrosion (48hrs), and Mass loss. According to ISO 9227



Standard :EN ISO 9227,

ILT-U-268Aluminum determination

Corrosion. According to ASTM G34

ILT-U-722Aluminum determination

Description:

Chemical analysis. According to ASTM E1251


Standard :ASTM E1251

ILT-U-2544Aluminum determination

Corrosion. According to ASTM G66

ILT-U-2545Aluminum determination

Corrosion. According to ASTM G67

ILT-U-2290Aluminum determination

Description:

N, and O, according to IGF and C, and S, according to Combustion



Standard :

ILT-U-132Analysis of carbon and sulfur by combustion

Description: Method: ASTM E1019

ILT-U-157Analysis of determination grain size

Description: Aluminum sample Method: ASTM E112

ILT-U-410Analysis of determination grain size and phase balance

Description: Duplex materials Method: ASTM E112, ASTM E562

ILT-U-258Analysis of determination grain size in steel

Description: ASTM E112 Method: ASTM E112

ILT-U-107Analysis of determination grain size in steel. 0,1

Description: Using image analyzer software Method: ASTM E112

ILT-U-302Analysis of macroetching metals

Description: Homogeneity or Not homogeneity of steel bar sample Method: ASTM E340, ASTM E381

ILT-U-203Average grain size test on cooper

Description: ISO 2624 Method: ISO 2624

ILT-E-09Average grain size test on steels. Open

Description: ASTM E112 Method: ASTM E112, ISO 643

ILT-U-1806Behavior in steam jet

Description: 18 days. Method A Method: PV 1503

ILT-U-387Bend determination

Description: Bend determination Method: ASTM E290

ILT-U-2631Bend determination

Description:

Bend test (with a former). Transverse bending specimens of a butt test coupon EN AW-6082 T6 Al 5183, 10 mm thickness, and ISO 18273-A-S filler. According to ISO 5173 Clause 6.2.1



Standard :[:en]ISO 5173[:],

ILT-U-606Bend test – Destructive test on welds in metallic materials

Description: Method: ISO 5173

ILT-U-994Bend testing – corrugated steel bar

Description: Method: ASTM A615

ILT-U-1706Bend testing of welds

Description: Method: AWS B4.0

ILT-U-1136Bending determination

Description: Pb, Cd, and Co Method: ISO 7086

ILT-U-017Bending determination in welded steel sample

Description: ASME SECC. IX ED. 2010 Method: ASME SECC. IX

ILT-U-753Bending steel

Description: Bend. Method: ISO 7438, VDA 238-100, Nch 201

ILT-U-1276Bending welded steel sample

Description: Bend Method: ASTM E190, ASTM A370, ASME BPVC Section IX

ILT-U-1090Breaking load test of slings (lifting cranes)

Description: Inspection bodies Method: ASME B30.9

ILT-U-1099Carbon and sulfur determination

% Carbon, % Sulfur. According to ASTM E1086

ILT-U-1793Cathodic disbondment determination

Description: Cathodic disbondment Method: ISO 21809-3, ASTM G8, ASTM G42

ILT-U-3272Charpy determination.

Description:

Lateral expansion, Shear fracture appearance, and Transition temperature (Fracture Appearance Transition Temperature). According to ISO 148-1

ASTM E23



Standard :ISO 148-1, ASTM E23

ILT-U-1529Chemical analysis of aluminum

Description: Fe; Si; Zn; V; Cr; and Na Method:

ILT-U-2273Chemical analysis of copper/nickel alloys

Chemical analysis

ILT-U-2271Chemical analysis of ferrous alloy steel

Chemical analysis

ILT-U-1137Chemical analysis of metals

Description: Method: EN 14726

ILT-U-1122Chemical analysis of N, H and O

Description: Determination of Hydrogen; and Oxygen by Infrared detection. Determination of Nitrogen by Thermal conductivity. Method:

ILT-U-371Chemical Analysis of Steel samples

Description: B, V, Cu, and Sn Method: ASTM E415

ILT-U-024Chemical Analysis of Steel samples. 0,1

Description: Method: ASTM A751

ILT-U-1270Chemical Analysis of Steel samples. 0,2

Description: Method: ASTM E1086, ASTM E415

ILT-U-1050Chemical Analysis of Steel samples. 0,3

Description: Vanadium and copper. Method:

ILT-E-22Chemical Analysis of Steel samples. 0,5

Description: ASTM E1086 and ASTM E415 Method: ASTM E415, ASTM E1086

ILT-U-636Chemical analysis of Tin metal samples

Description: Arsenic, Bismuth, Cooper, Lead, Iron, Antimony, Tin Method:

ILT-U-1487Chemical analysis of titanium samples

Chemical analysis

ILT-U-2272Chemical analysis of zinc alloys

Chemical analysis

ILT-U-1416Chemical composition determinations

Chemical composition of duplex steel. According to ASTM E1086

ILT-U-870Chemical composition of manganese steel

Description: Method: ASTM E2209

ILT-U-2491Chemical composition of steel determinations

Chemical composition of low carbon steel and duplex steel. According to ASTM E415, ASTM A890

ILT-U-2595Chemicals determination in metals

Description:

Chemical composition of metals


Standard :

ILT-U-1138Coating mass determination

Description: Hot dip galvanized coatings Method: ISO 1460

ILT-U-3070Coating thickness determination

Description:

Coating thickness (Eddy Current). According to EN ISO 2360


Standard :EN ISO 2360

ILT-U-1241Compression Testing of Metallic Materials at Room Temperature

Description: Method: ASTM E9

, ILT-U-2370Content of elements in Zircaloy-4

Cr, Fe, Hf and Sn

ILT-U-227Continuously hot-dip coated steel flat products

Description: EN 10346 Method: EN 10346

ILT-U-3379Cooper determination

Description:

Chemical composition. According to EN 15079


Standard :EN 15079,

, ILT-U-813Copper determination

Description:

Copper concentration


Standard :

ILT-U-1593Corrosion behavior of stainless steels

Corrosion behavior

ILT-U-2740Corrosion determination

Description: Method: ISO 6509

ILT-U-2698Corrosion determination

Description:

Ammonia test for stress corrosion resistance. According to ISO 6957


Standard :ISO 6957,

, ILT-U-2702Corrosion determination

Description:

Sulphur dioxide. Accoring to ISO 6988, ASTM G87, DIN 50018


Standard :ISO 6988, ASTM G87, DIN 50018

ILT-U-3391Corrosion determinations

Description:

Average rate of corrosion. According to ASTM G4



Standard :ASTM G4,

ILT-U-1331Corrosion in salt spray determination

Description: Method: ASTM D1654, NBR 8094

ILT-U-532Corrosion tests in artificial atmospheres — Salt spray tests

Description: Method: EN ISO 9227, ASTM B117

ILT-U-1829CTOD – Crack tip opening displacement test of Welded samples

Description: Welded samples Method: BS 7448-2, ISO 15653

ILT-U-1374CTOD determination.

Description:

CTOD testing of Single Edge Notched Bend specimens. According to ISO 12135


Standard :ISO 12135,

ILT-U-489CTOD. Crack tip opening displacement test of metallic materials

CTOD Test measures the resistance of a material to the propagation of a crack. (room temperature).

ILT-U-686Degree of Blistering of Paints test

Description: ASTM D714 Method: ASTM D714

ILT-U-685Degree of Rusting on Painted Steel Surfaces test

Description: Method: ASTM D610

ILT-U-2132Delta ferrite content determination

Description: Delta ferrite content in martensitic stainless steels Method: AMS 2315

ILT-U-287Density testing on steel

Description: Method: ASTM B311, ISO 3369

, ILT-U-1402Destructive tests on Butt weld steel.

Description:

Fracture (Butt Weld. FW). According to EN 1320 - ASME IX / QW182 - ISO 9017


Standard :EN 1320, [:en]ISO 9017[:], ASME IX/QW182

, ILT-U-273Destructive tests on Fillet weld steel.

Description:

Fracture (Fillet Weld. FW). According to EN 1320, ASME IX / QW182,  ISO 9017



Standard :EN 1320, [:en]ISO 9017[:]

ILT-U-758Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels

Description: Method: ASTM A923

ILT-U-1905Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels. ABC

Description: Method A, B and C Method: ASTM A923

ILT-U-1244Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels. C

Description: Duplex Austenitic/Ferritic Stainless Steels (Method C) Method: ASTM A923

ILT-U-975Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys

Description: ASTM G28 – method A. Method: ASTM G28

ILT-U-035Determination of carbon and sulphide by combustion of induction furnace and infrared detection, and X-Ray Fluorescence.

Description: ASTM E 1019 /ASTM E 1085 Method: ASTM E1019, ASTM E1085

ILT-U-1274Determination of Coating Mass in zinc coatings on steel wire

Description: Method: EN 10244-2

ILT-U-1055Determination of depth of decarburized layer

Description: Depth of decarbuized Method: ASTM E1077

ILT-U-1607Determination of dry thickness

Description: Painted sheet sample Method: ASTM D5796

ILT-U-1328Determination of Emittance of Materials Near Room Temperature

Description: Determination of Emittance of Materials Near Room. Temperature – Emissometer Model AE Method: ASTM C1371

ILT-U-255Determination of film thickness (organic coating)

Description: 7C method Method:

ILT-U-1091Determination of mass of zinc coating per unit area on galvanized pipes

Description: Strip and weigh method Method: ASTM A90

ILT-U-1437Determination of metals in metal chips concentrates

Description: metals chips concentrate (Ni, Zn, Bi, Pb) Method:

ILT-U-1057Determination of metals in minerals

Description: Cu, Pb, Zn, As, Sb and Fe (Atomic Absorption) Method:

ILT-U-562Determination of non-metallic inclusions

Description: Method: DIN 50602

ILT-U-206Determination of O, N, C, S, H by LECO analysis

Description: Determination of O, N, C, S, H by LECO analysis Method: ASTM E1447, ASTM E2371, ASTM E1409

ILT-U-201Determination of resistance to corrosion of metal on samples exposed to condensation chamber

Corrosion in salt spray determination. According to ISO 6270-1

ILT-U-1140Determination of resistance to humidity

Description: ISO 6270-2 Method:

ILT-U-444Determination of resistance to intergranular corrosion of stainless steels (Method A)

Description: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels – Corrosion test in media containing sulfuric acid (Method A) Method: EN ISO 3651-2

ILT-U-473Determination of resistance to intergranular corrosion of stainless steels (Method B)

Description: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels – Corrosion test in media containing sulfuric acid (Method B) Method: EN ISO 3651-2

ILT-U-125Determination of tension steel rebar

Description: ASTM A370 Method: ASTM A370

ILT-U-1046Determination of the effective depth of hardening after nitriding

Description: Clause 3. Method: DIN 50190

ILT-U-351Determination of Tin impurities.

Description: Determinations: Sb, Pb, Bi, Cu, Fe, As, In, Co, Zn, Ni, Al, S, Cd, Ag and others Method:

ILT-U-066Determination on copper cathodes

Description: BSI Method Method:

ILT-U-033Determinations for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

Description: ASTM A615 Method: ASTM A615

ILT-U-1611Determinations in construction steel bars

Description: Tensile properties; bend performance; and surface geometry measurement Method: BS 4449

ILT-U-040Determining the Inclusion Content of Steel

Description: Manual method Method: ASTM E45

ILT-E-23Determining the Inclusion Content of Steel. Open

Description: ASTM E45 Method: ASTM E45

ILT-U-1974Determining the inclusion or second-phase constituent content

Description: Determining the inclusion or second-phase constituent content by automatic image analysis Method: ASTM E1245

ILT-U-611Determining the mass loss and relative corrosion resistance of metal samples exposed in a salt spray chamber (CASS and NSS)

Description: Mass loss and relative corrosion resistance (CASS and NSS) Method: EN ISO 9227

ILT-U-145Determining the occurrence of fractures using the method DWTT

Description: Method: ASTM E436, EN 10274, API 5L3-1996

ILT-U-468Determining the relative corrosion resistance of metal samples exposed in a salt spray chamber.

Description: Appendix A5. Method: ASTM G85

ILT-U-054Determining Volume Fraction by Systematic Manual Point Count

Description: ASTM E562 Method: ASTM E562

ILT-U-1220Drop-Weight Test to Determine Nil-Ductility Transition Temperature

Description: Ferritic Steels Method: ASTM E208

ILT-U-1908Energy dispersive x-ray microanalysis (EDX) determination

Description: Energy dispersive x-ray microanalysis (EDX) Method:

ILT-U-3013Energy-dispersive spectrometry (SEM/EDS) determination

Description:

Quantitative analysis using energy-dispersive spectrometry (SEM/EDS). According to ASTM E1508


Standard :ASTM E1508

ILT-U-154Evaluating the Microstructure of Graphite in Iron Castings

Description: ASTM A247 Method: ASTM A247

ILT-U-1867Evaluation of Field Metallographic Replicas

Description: Prepare specimens (Steel samples AISI 1010) for metallography, includes nital etch; Prepare replicas of specimens prepared for metallography, acetate film; Gold coated; and Digital micrographs of samples (100X magnification) Method: ASTM E1351

ILT-U-687Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

Description: Time test 120 hs Method: ASTM D1654

ILT-U-274Evaluation of pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking. A

Description: Test duration: 96 hours Test solution: A Method: NACE TM 0284

ILT-U-130Evaluation of pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking. C

Description: Total test pressure: 1 bar Partial pressure: 0.005 bar H2S (5 mbar) with CO2 balance Test duration: 720 hours Test solution: C Method: NACE TM 0284

ILT-E-21Evaluation of pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking. Open

Description: Test duration: 96 hours Test solution: A Method: NACE TM 0284

ILT-U-291Exposure to Laboratory Light Sources: Accelerated UV Ageing

Description: Exposure to Laboratory Light Sources: Accelerated UV Ageing (340 nm (UVA) method for 300 hrs) Method: ASTM G154

ILT-U-2115Failure determination by macrographic analysis

Description: Folds, fissures, pores, occlusions, exfoliations or any other defect Method: Nch 1514

ILT-U-2331Ferrite content determinations

Ferrite test

ILT-U-2366Flattening and Flaring determinations

Flattening and Flaring

ILT-U-1868Four-point bending test (Static)

Description: Four-point bending (Static): Structural Stiffens; Maximum moment; and Yield moment Method: ASTM F2193

ILT-U-1056Gold and silver determination

Description: Au and Ag (Atomic absorption) Method:

, ILT-U-2681Gold plated ring determination

Description:

Macrographic examination with a binocular magnifying glass. According to NF S80-772


Standard :NF S80-772,

, ILT-U-2680Gold plated ring determination

Description:

Macrographic examination with a binocular magnifying glass. According to ISO 3160-2


Standard :ISO 3160-2,

ILT-U-598Hardness test on arc welded joints

Description: Impact Method: ISO 9016

ILT-U-1045Hardness test on arc welded joints. 0,1

Description: Method: EN ISO 9015-1

, ILT-U-3203Hardness Vickers determination

Description:

 Vickers Hardness. According to ASME IX QW 290.5


Standard :ASME IX QW 290.5

ILT-U-1794Holiday detection test

Description: Holiday detection test Method: NACE RP0188, ASTM G62

ILT-U-3204Impact determination

Description:

 Impact Test. According to ASME IX QW 170


Standard :ASME IX QW 170

ILT-U-1791Impact resistance determination

Description: Impact resistance Method: ISO 21809-3, ASTM D2794, ASTM G14

ILT-U-1440Impact test in CHARPY type, V-notch specimens

Description: Low enery level, Srike 8mm, and Temperature 0 °c Method: ASTM E23, GOSTO 9454, ISO 148-1, GB/T 229

ILT-E-05Impact test in CHARPY type, V-notch specimens. High Level enery

Description: High Level enery, Srike 2mm, and Temperature 20 °c Method: ASTM E23, ISO 148-1, EN 10045-1, GB/T 229, GOSTO 9454

ILT-U-322Impact test in CHARPY type, V-notch specimens. 0,1

Description: Medium enery level, Srike 2mm, and Temperature 20 °c Method: ISO 148-1, ASTM E23, GB/T 229, GOSTO 9454

ILT-U-1250Impact test in CHARPY type, V-notch specimens. 0,2

Description: High Level enery, Srike 8mm, and Temperature 20 °c Method: ISO 148-1, ASTM E23, GB/T 229, GOSTO 9454

ILT-U-561Impact test in CHARPY type, V-notch specimens. 0,3

Description: High Level enery, Srike 8mm, and Temperature -40 °c Method: ISO 148-1, ASTM E23, GOSTO 9454, GB/T 229

ILT-U-826Impact test in CHARPY type, V-notch specimens. Low enery level

Description: Low enery level, strike 2 mm, and Temperature 20 °c

Method: ASTM E23, GOSTO 9454, ISO 148-1, GB/T 229

ILT-U-2403Impact test in CHARPY type, V-notch specimens. Super High enery level

Description: Super High enery level, and Temperature 20 °c

Method: ASTM E23, GOSTO 9454, ISO 148-1, GB/T 229

ILT-U-2401Inclusion count determination

Inclusion count (method A). ISO 4967

ILT-U-2365Inclusion count determinations

Inclusion count (method A)

ILT-U-1792Indentation resistance determination

Description: Indentation resistance Method: ISO 21809-3, ASTM G17

ILT-U-3370Iron Chip Corrosion determination

Description:

Iron Chip Corrosion. According to  ASTM D4627


Standard :ASTM D4627,

ILT-U-2114Jominy qualification test

Description: Jominy qualification Method: ISO 642, ASTM A255

ILT-U-1814Linear weight determination in corrugated bar

Description: Clause 11 Method: ASTM A615

ILT-U-1998Linear-Elastic Plane-Strain Fracture Toughness CTOD

Description: SENB or CT (Metallic materials specimens) Method: BS 7448-1

ILT-U-1035Linear-Elastic Plane-Strain Fracture Toughness K1c of Metallic Materials

Description: Method: ASTM E399

ILT-U-1891Linear-Elastic Plane-Strain Fracture Toughness KIc

Description: SENB or CT (Metallic materials specimens) Method: ASTM E399

ILT-U-1036Linear-Elastic Plane-Strain Fracture Toughness Kic. 0,1

Description: SENB or CT (Metallic materials specimens) Method: ASTM E1820

ILT-U-605Macroscopic and microscopic examination of welds

Description: Method: ISO 17639

, ILT-U-487Magnetic materials determination

Description:

Magnetic properties by means of an Epstein frame. According to IEC 60404-2 


Standard :

, , ILT-U-3349Mattress determination

Description:

Determination of resilience. According to ABNT NBR 13579-1


Standard :NBR 13579-1, , [:en]API 1104[:]

ILT-U-2102Measurement of coating thickness

Description: Coating thickness in metallic (Microscopical method) Method: ASTM B487

ILT-U-2067Measurement of coating thickness. 0,1

Description: Measurement of coating thickness. X-ray spectrometric methods Method: ISO 3497

ILT-U-1037Measurement of Fatigue Crack Growth Rates

Description: Method: ASTM E647

ILT-U-683Measuring Adhesion by Tape Test

Description: Method B – Cross Cut Test. Method: ASTM D3359

ILT-U-1011Measuring the corrugations by manual method

Description: Clause 7 and 8 Method: ASTM A615

ILT-U-2076Mechanical properties of fasteners

Description: Torsional test and minimum torque test Method: ISO 898-7

ILT-U-2080Mechanical properties of fasteners made of carbon steel and alloy steel

Description: Proof load test Method: ISO 898-2

ILT-U-1662Metal corrosion testing

Description: 49 CFR 173.137 and described in UN Manual of Tests & Criteria, Section 37 Method:

ILT-U-2554Metal determination

Fatigue (HCF). According to ASTM E466

ILT-U-2555Metal determination

Fatigue (LCF). According to ASTM E606

ILT-U-2748Metal determination

Description:

Ni, Cr, Si, Mn, Mo, V, Co, Cu, Ti, Mo, Nb, Sn, B, Al, S), IGF (N), and combustion (C, S).According to OES/Arc-Spark


Standard :

ILT-U-2813Metal determination

Description:

Weight, Coating thickness. According to Nch 228



Standard :Nch 228,

ILT-U-2821Metal determination

Description:

Flattening Test. According to ASTM A999


Standard :ASTM A999,

ILT-U-2898Metal determination

Description:

Salt Spray (SWAAT). Total: 96 hours. (Determine the presence of corrosion every 24 hours). According to ASTM G85 Annex 3


Standard :ASTM G85,

ILT-U-2920Metal determination

Description:

Chemical analysis (Si, Mn, Cr, Cu) OES / Arc-Spark. According to ASTM E1999



Standard :ASTM E1999,

ILT-U-2922Metal determination

Description:

Proof Load testing (Iron nut) According to ASTM F606/F606M, ASTM A962/A962M, ISO 3506-2, ISO 898-2



Standard :ISO 3506-2, ASTM A962, ASTM F606, [:es]ISO 898-2[:],

ILT-U-2997Metal determination

Description:

UT in immersion, according to ASTM E1001, and HIC TEST, according to NACE TM0284



Standard :ASTM E1001, NACE TM 0284,

ILT-U-3068Metal determination

Description:

Oxygen in Copper and Copper Alloys by Inert Gas Fusion. According to ASTM E2575


Standard :ASTM E2575

ILT-U-3073Metal determination

Description:

Chemical Analysis. According to ASTM E1476


Standard :ASTM E1476

ILT-U-3075Metal determination

Description:

Chemical analysis on Inconel 625. According to ASTM E3047


Standard :ASTM E3047

ILT-U-3082Metal determination

Description:

Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates. According to ASTM D5162


Standard :ASTM D5162

ILT-U-1223Metal determination

Description:

Bending test. According to AWS D1.1


Standard :AWS D1.1

ILT-U-3086Metal determination

Description:

Hot water soak adhesion test. According to ASTM D6677, CSA Z45.20, Nace SP0394



Standard :ASTM D6677, CSA Z45.20, Nace SP0394

ILT-U-3087Metal determination

Description:

Backside contamination, Cross section porosity, Interface porosity. According to CSA Z45.20/ Nace SP0394



Standard :CSA Z45.20, Nace SP0394

ILT-U-3093Metal determination

Description:

Shear stress test on bolt/fasteners sample. Accordign to ASTM F606/F606M


Standard :ASTM F606

ILT-U-3094Metal determination

Description:

Analysis of Cu and Pb. Accordign to Electrolytic Method (ICP AES, ICP MS)



Standard :

ILT-U-3100Metal determination

Description:

Axial tensile on bolt/fasteners. According to ISO 898-1


Standard :ISO 898-1

ILT-U-3108Metal determination

Description:

Strain controlled fatigue. According to BS 7270


Standard :BS 7270

ILT-U-3129Metal determination

Description:

Hardness. Measurement of thickness of hardened surface layers on ferrous parts. (Rockwell HARDNESS method ISO 6508-1). Accordign to UNI 11153-1




Standard :UNI 11153-1

ILT-U-3377Metal determination

Description:

Verification of dimensions, shape, and mass, (welded mesh, Wire, and Steel Bar corrugated). According to NCH 1173, NCH 204, NCH 218



Standard :NCH 1173, NCH 204, NCH 218, , ASTM D3389

ILT-U-118Metal determination, 1A

Description: Immersion corrosion test Method: ASTM G31, ASTM G1

ILT-U-366Metal determination. 1B

Description: Plastic Strain Ratio r for Sheet Metal Method: ASTM E517

ILT-U-364Metal determination. 1C

Description: Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials Method: ASTM E646

ILT-U-2089Metal determinations

Description: chemical analysis in stainless steel sample by OES Method: ASTM E1086, ASTM E1019

ILT-U-2284Metal determinations

Silicon and Molybdenum

ILT-U-2285Metal determinations

Description:

Chromium, Vanadium and Manganese. Method ICP OES


Rule :

ILT-U-3168Metal determinations

Description:

x-ray diffraction volume percent retained austenite. According to ASTM E975


Standard :ASTM E975

ILT-U-3169Metal determinations

Description:

Ferrite number. According to ISO 8249


Standard :ISO 8249

ILT-U-3174Metal determinations

Description:

Resistance to solvent ( rubbing test). According to EN 13523-11


Standard :EN 13523-11

ILT-U-3173Metal determinations

Description:

Resistance to cracking on bending ( T-bend test). According to  EN 13523-7


Standard :EN 13523-7

ILT-U-3175Metal determinations

Description:

Adhesion after indentation (cupping test). According to EN 13523-6


Standard :EN 13523-6

ILT-U-101Metallic and oxide coating. Measurement of coating thickness

Description: Microscopical method Method: ISO 1463

ILT-U-2844Metallic determination

Description:

Magnetic field change, magnetic-induction principle, and Eddy-current gauge. According to ISO 2808


Standard :[:en]EN ISO 2808[:es]ISO 2808[:],

ILT-U-2899Metallic determination

Description:

Coating weight and Coating thickness (dilute hydrochloric acid method). According to Nch 228



Standard :Nch 228,

ILT-U-027Metallic materials – Bend test

Description: NMX-B-113 Method: NMX-B-113

ILT-U-447Metallographic determination of the Delta ferrite content in austenitic Semi-finished products

Description: Fusing test Method: AVS E 63/01 A

ILT-U-1756Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (SEM/EDS)

Description: Qualitative analysis. Method: ISO 22309

ILT-U-1317Microetching Metals and Alloys

Description: Method: ASTM E407

ILT-U-445Microstructure of cast irons

Description: Graphite classification by visual analysis Method: EN ISO 945-1

ILT-U-1059Nick Break Test

Description: Method: API 1104

, ILT-U-2693Nickel determination

Description:

Detection of nickel. Accrosing to EN 12472


Standard :EN 12472,

ILT-U-486Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings

Dry film thickness. According to: ASTM D 7091 and ASTM D1186

ILT-U-275Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials. 1A

Description: Evaluation of coatings exposed to atmospheric corrosion Method:

ILT-U-2024Paints and varnishes determination

Description: Film thickness Method: ISO 2178

ILT-U-2025Paints and varnishes determinations.

Description: Coating Thickness Amplitude Sensitive Eddy Current (Eddy Current) Method Method: ISO 2360

ILT-U-104Pending test for low alloy steel and Bar geometry measurement for low alloy steel

Description: BS EN ISO15630-1 Method: EN ISO 15630-1

ILT-U-1263PENT (Pennsylvania Notch Test) test.

Description: Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins Method: ASTM F1473

ILT-U-2322Pitting and crevice corrosion resistance determination

Corrosion Resistance, ASTM G48 method E

ILT-U-431Pitting and crevice corrosion resistance of Duplex steel by Use of Ferric Chloride Solution (method A)

Description:

Corrosion Resistance. According to ASTM G48 method A.


Standard :ASTM G48,

ILT-U-356Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution

Description: Method B Method: ASTM G48

ILT-U-1269Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution (method A)

Description: Method A. Method: ASTM G48

ILT-E-27Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution (method A). Open

Description: Method A. Method: ASTM G48

ILT-U-1667Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution (method C)

Description: Method C. Method: ASTM G48

ILT-U-301Preparation and analysis of micro specimen for ferrite count

Description: Microstructure examination Method: ASTM E3, ASTM E407

ILT-U-106Pull-of test for adhesion

Description: ISO 4624 Method: ISO 4624

ILT-U-383Pull-off test for adhesion determination

Description:

Pull-off test for adhesion. (method E). According to ASTM D4541


Standard :ASTM 4541

ILT-U-1232Pullout (Static) and Compression bending (Static) test

Description: Pullout Static (Maximum Pullout load); and Compression Bending Static (Stiffens; Maximum Load; Displacement at ultimate load; Yield load; Displacement at yield load; Displacement at 2%; and Elastic displacement) Method: ASTM F1717, ASTM F543

ILT-U-1235Qualitative XRD examination

Description: X-ray diffraction analysis and Crystallographic texture Method: EN 13925-2

ILT-U-1296Reinforcement steel bars for mechanical properties Rm and Re determinations

Description: Method: EN ISO 15630-1

ILT-U-1805Resistance to stone impact

Description: 18 days. Method B Method: ISO 20567-1

ILT-U-2131Resistivity of Electrical Conductor Materials

Description: Resistivity Method: ASTM B193

ILT-U-3371Rust Protection determination

Description:

Rust Protection by Metal Preservatives in the Humidity Cabinet. According to ASTM D1748


Standard :ASTM D1748,

ILT-U-3373Rust-Preventing characteristics determination

Description:

Rust-Preventing characteristics. According to ASTM D665


Standard :ASTM D665,

ILT-U-3372Rust-Preventing characteristics determination

Description:

Rust-Preventing characteristics. According to ASTM D3603


Standard :ASTM D3603,

ILT-U-1690Salt Spray determinations

Description: Galvanized Steel and Pre-painted Galvanized Steel, samples. (500 hours) Method: ASTM B117

ILT-U-133Silicon gravimetric analysis

Description: ASTM E350 Method: ASTM E350

ILT-U-2279SOHIC determination

SOHIC Test

, ILT-U-2539Specific migration determination

specific migration of arsenic, cadmium, chromium, nickel and lead. Method GB 4806.9

ILT-U-1850Specific migration of heavy metals in metal article

Description: Simulant: Artificial Tap Water, 5 g/L Citric Acid Method: EN 13130-1

ILT-U-215SSC (Sulfide stress cracking) test.

Classification of etch structure. According to (Method A, Solution A)

ILT-U-969SSC (Sulfide stress cracking) test.

Description:

Classification of etch structure. According to ANSI/NACE TM0177 (Method A, Solution B)


Standard :ANSI/NACE TM0177

ILT-U-2457SSC (Sulfide stress cracking) test.

Description:

Classification of etch structure. according to ANSI/NACE TM0177 (Method A, Solution D)


Standard :ANSI/NACE TM0177

ILT-U-3109SSC (Sulfide stress cracking) test.

Description:

Sulphide Stress Corrosion Cracking Test (SSCC 720 Hrs.). According to NACE TM 0177 Method B



Standard :ANSI/NACE TM0177

ILT-U-3202SSC (Sulfide stress cracking) test.

Description:

Classification of etch structure. According to ANSI/NACE TM0177 (Method A - Solution A).


Standard :ANSI/NACE TM0177

ILT-U-3210SSC (Sulfide stress cracking) test.

Description:

Stress Corrosion Test. According to NACE TM 0177 (Method D - Solution A)


Standard :ANSI/NACE TM0177

ILT-U-1564SSC four point bend

Description: Solution A – 720 hs Method: NACE TM 0316

ILT-U-102Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels. ABCE

Description: ASTM A262 Practice A, B, C and E Method: ASTM A262

ILT-U-018Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels. AE

Description: ASTM A262 Practice A and E Method: ASTM A262

ILT-U-124Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels. BC

Description: ASTM A262 Practice B and C Method: ASTM A262

ILT-U-196Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels. C

Description: ASTM A262 Practice C Method: ASTM A262

ILT-U-324Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels. CE

Description: Practice C & E Method: ASTM A262

ILT-E-06Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels. Open

Description: ASTM A262 Practice A and E Method: ASTM A262

ILT-U-172Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels.B

Description: ASTM A262 Practice B Method: ASTM A262

ILT-U-171Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels.E

Description: ASTM A262 Practice E Method: ASTM A262

ILT-U-1555Static test and fatigue in bone plates

Description: Method: ASTM F382

ILT-U-2430Steel wire determinations

Tensile and Bend test. According to ASTM A1064

ILT-U-443Steels – Determination of depth of decarburization

Description: EN ISO 3887 Method: EN ISO 3887

ILT-U-784Surface area for metal powders (BET)

Description: BET – 5 – Point analysis (Nitrogen Gas) Method: ASTM B922

, ILT-U-784Surface area for metal powders (BET) OT

Description: BET – 5 – Point analysis (Nitrogen Gas) Method: ASTM B922

ILT-U-1348Surface discontinuities of bolts

Description: microscopic method – requirements S1 Method: ASTM F788

ILT-U-3205Tensile determination

Description:

Tensile Test. According to ASME IX QW 150


Standard :ASME IX QW 150

ILT-U-1467Tensile test determination

Description: Method: EN ISO 15630-3

ILT-U-620Tensile testing determination

Description:

Ultimate tensile strength in MPa; Yield strength offset; Elongation in %. According to ASTM A706, NTC 2289


Standard :NTC 2289, , [:en]ASTM A706[:]

ILT-U-266Tensile Testing of Metallic Materials. 150

Description: Method of Test at Elevated Temperatures (150 °c) Method: ISO 6892-2

ILT-U-2468Tensile Testing of Metallic Materials. 250

Description: Method of Test at Elevated Temperatures (250 °c) Method: ASTM E21

ILT-U-845Tensile Testing of Metallic Materials. 350

Description: Method of Test at Elevated Temperatures (350 °c) Method: ASTM E21

ILT-U-421Tensile Testing of Metallic Materials. 980

Description: Method of Test at Elevated Temperatures (980 °c) Method: ASTM E21

ILT-U-1066Tension test on aluminum

Description: Method: ASTM B557, IS 1608, ISO 6892

ILT-U-165Tension testing – Autographic method

Description: clause 7.7.3 Method: ASTM E8

ILT-E-08Tension testing of steel

Description: Ultimate tensile strength in MPa, Yield strength offset = 0,2% in MPa, Elongation in %, Reduction of area in %. Method: ASTM E8, ISO 6892-1, EN 10002-1, IRAM IAS U500 102, GB/T 228.1, GOST 1497, TCVN 197-1

ILT-U-313Tension testing of steel wire

Description: Ultimate tensile strength in MPa, Yield strength offset = 0,2% in MPa, Elongation in %, Reduction of area in %. Method: ASTM E8

ILT-U-156Tension testing on steel

Description: Ultimate tensile strength in MPa, Yield strength offset = 0,2% in MPa, Elongation in %, Reduction of area in %. Method: ASTM E8, ISO 6892-1, EN 10002-1, IRAM IAS U500 102, GB/T 228.1, GOST 1497, TCVN 197-1

ILT-U-006Tension testing on steel (Flat sample)

Description: Ultimate tensile strength in MPa, Yield strength offset = 0,2% in MPa, Elongation in %, Reduction of area in %. Method: GB/T 228.1, ISO 6892, ASTM E8, GOST 1497

ILT-U-1176Tension Testing on steel (sheet sample)

Description: Ultimate tensile strength; Upper Yield strength; and Elongation in % according Method: ASTM A370

ILT-U-001Test of charge to break Sling

Description: ASME B30.9:2006 Method: ASME B30.9

ILT-E-16Test of Salt Spray

Description: ASTM B117 Method: ASTM B117

ILT-U-126Testing Water Resistance of Coatings in 100% Relative Humidity

Description: 240 hours. Method: ASTM D2247

ILT-U-032Testing Water Resistance of Coatings Using Water Fog Apparatus

Description: ASTM D1735 Method: ASTM D1735

ILT-U-1554Torsion, driving torque and pullout test on bone screws

Description: Yield Torque; Maximum Torque; Breaking Angle; Insertion Torque; Removal Torque; and Maximum pullout load Method: ASTM F543

ILT-U-2651Trace elements in low carbon steel determination

Description:

As, Co, V, Pb, Sn, W and B. Method Spectrophotometry


Standard :

ILT-U-1707Transverse tensile test – Destructive tests on welds in metallic materials

Description: Transverse tensile test Method: ISO 4136

ILT-U-423Viscosity determining corrosion inhibitors

Description: ASTM D2196 Method: ASTM D2196

, ILT-U-1552Volumetric expansion determination

Description:

Volumetric expansion by water jacket. According to NTC 5171 Section 5, and NTC 2699 Annex E.3.



Standard :NTC 5171, NTC 2699

ILT-U-2810Weld shear determination

Description:

Welding shear test on high strength mesh specimens. According to Nch 220


Standard :Nch 220,

ILT-U-1297Welded mesh for shear force determinations

Description: Method: ISO 15630-2

ILT-U-092Wire – Simple torsion test

Description: ISO 7800 Method: ISO 7800

ILT-U-1000Wire determinations

Description: Method: ASTM B3, ASTM B193

ILT-U-1530X-Ray Fluorescence in stainless steel

Description: X-Ray Fluorescence: Mn; P; Si; Cr; Ni; Mo; Cu; V; and Nb Method: ASTM E572

ILT-U-1686Zinc coating mass of flat steel determinations

Description: Zinc coating mass of flat Steel Method: ASTM A90

ILT – Interlaboratory Test
Scroll to Top
Cart
  • No products in the cart.
  • Microetching Metals and Alloys USD$0.00
    SKU:
    ILT-U-1317