close
  • Follow us
CATEGORIESILT CODENAMESUMMARYSELECT
ILT-U-2166Acoustic determinations. 1A

Description: Evaluation of the sound pressure level emitted Method: ISO 11201

ILT-U-2165Acoustic determinations. 1B

Description: Evaluation of the power level emitted Method: ISO 3744

ILT-U-1964Acoustic testing class

Description: Acoustic testing class, in the NOISE SEAL test. Portaria n.º 430, de 16 de agosto de 2012 Method:

ILT-U-1406ADSL Filter determination

Description: Method: ETSI TS 101 952-3

ILT-U-1209ADSL Modem determination

Description: Method: ETSI ES 202 913

ILT-U-1666Aging panels determinations

Description: Aging panels (120 hours) Method: CIE 121, CIE 63, CIE 84

ILT-U-1207Analog telephone determination

Description: Method: ETSI ES 203-021

ILT-U-1787Appliance determinations

Description: Appliances for skin or hair care Method: IEC 60335-2-23

ILT-U-1591Audio/video, information and communication technology equipment

Description: Safety requirements Method: IEC 62368-1

ILT-U-1466Automatic electrical control

Description: Method: IEC 60730-1

ILT-U-1170Ball pressure test

Description: Method: IEC 60695-10-2

ILT-U-117Batteries determinations

Description: LR6-2 – Portable lighting LED R6P-2 – Portable lighting LED Method: IEC 60086-2

ILT-U-1697Battery chargers determinations

Description: Battery chargers Method: IEC 60335-2-29

ILT-U-457Calibration of electrical magnitudes

Description: Voltage (DC); Voltage (AC @ 50 Hz); Current (DC); Current (AC @ 50 Hz); Frecuency; and Resistance Method:

ILT-U-2050Calibration of electrical safety tester

Description: Calibration, Insulation resistance DC. Calibration, Ground bond test. Method:

ILT-U-1563Climatic test – Vibration (sinusoidal)

Description: Vibration (sinusoidal); 66 hs (22 for each cyle); 3 cycles Method: IEC 60068-2-6, ISO 16750-3

ILT-U-1562Climatic test. 1A

Description: *85°C / 85% UR; 168 hs; 1 cycles Method: IEC 60068-2-67

ILT-U-1560Climatic test. 1B

Description: *0°C / T max °C; 1 hs; 10 cycle (ISO 16750-4 chapter 5.4.3) Method: ISO 16750-4

ILT-U-1559Climatic test. 1C

Description: *20°C / -40°C / 140°C; 5 hs; 1 cycle (ISO 16750-4 chapter 5.2) Method: ISO 16750-4

ILT-U-1557Climatic test. 1D

Description: 55°C / -10°C / 25°C; 20 / 65 / 80 / 96 %UR; 24 hs; 11 cycles Method: IEC 60068-2-38

ILT-U-1801Conducted Emission tests

Description: Conducted Emission tests Method: CISPR 32, EN 55032

ILT-U-1896Degrees of Protection IK

Description: Led luminaires Method: IEC 62262

ILT-S-05Degrees of protection provided by enclosures (IP Code)

Description: Method: IEC 60529

ILT-U-063Degrees of protection provided by enclosures (IP Code) and Glowing/hot-wire

Description: IEC 60529 Method: IEC 60529

ILT-U-796Determination of airborne acoustical noise

Description: Vacuum cleaners Method: IEC 60704-2-1

ILT-U-185Determination of electrical safety test. 1A

Description: Marking & instructions; Protection against access to live parts; Power input & current; Leakage current & Electric Strength; Provision for earthing; and Screws & Connections Method: IEC 60335-1, IEC 60335-2-3

ILT-U-129Determination of electrical safety test. 1C

Description: All test Method: IEC 60335-1

ILT-U-128Determination of environmental test

Description: IEC 60335-1 and IEC 60950-1 Method: IEC 60335-1, IEC 60950-1

ILT-U-961Determination of Ohmic resistance cables. 1A

Description: Method: IEC 60228

ILT-U-060Determination of Ohmic resistance cables. 1B

Description: IEC 60227 section 2.1 Method: IEC 60227

ILT-U-310Determination of stress and elongation, in wires and cables

Description: Clause 3.5.1. Method: UL 2556

ILT-U-433Determination of temperature rise on electric switches

Description: Method: IEC 60669-1

ILT-U-851Determination of the electrical resistance, dielectric strength and stress and elongation Effort electrical conductors

Description: Determination of the electrical resistance to DC, Determination of effort and mechanical stress elongations of the wires, and Dielectric strength (high voltage) Method: NMX-J-212, NMX-J-312, NMX-J-293

ILT-U-277Determination of the power and earthing

Description: IEC 60065 Method: IEC 60065

ILT-U-180Determination of thickness of insulation covered and electrical conductors

Description: IEC 60811-1-1-2001 clause 8.1 – IEC 60811-201-2012 and IEC 60811-1-1-2001 clause 8.2 – IEC 60811-202-2012 Method: IEC 60811-1-1, IEC 60811-201, IEC 60811-202

ILT-U-034Determinations for IT equipment

Description: IEC 60950-1 Method: IEC 60950-1

ILT-U-1471Determinations in cell phones

Description: SAR Test; and TS 51.010-1 V6.5.0 test in 3GPP. According to Resolução nº 533 – Agência Nacional De Telecomunicações Method:

ILT-U-1223Determinations in Electrical Insulating Liquids

Description: Power factor Method: ASTM D924

ILT-U-191Determinations in Power cables with extruded insulation and their accessories for rated voltages

Description: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) Method: IEC 60502-2

ILT-U-1477Determinations in PVC and XLPE cables

Description: Measurement of insulation thickness; Measurement of thickness of non-metallic sheath (insulation covered and electrical conductors; Measurement of overall dimensions; Insulation resistance measurement; Water absorption test – electrical method; Loss of mass test; and Thermal ageing of insulation and sheath Method: IEC 60811-201, IEC 60811-202, EN 60811-203, CEI 60502, EN 60811-401, EN 60811-402, EN 60811-409

ILT-U-1478Determinations in PVC cables

Description: Thermal shock test on insulation and sheath; Pressure test on insulation and sheath; Impact test at low temperature on insulations and sheaths; and Coiling test at low temperature on insulations and sheaths Method: EN 60811-504, EN 60811-506, EN 60811-508, EN 60811-509

ILT-U-1479Determinations in XLPE cables

Description: Heat shrinking of insulation and sheath; and Hot set test on insulation Method: EN 60811-502, EN 60811-503, EN 60811-507

ILT-U-1052Determining the density

Description: Pycnometer method Method: IEC 60811-606

ILT-U-540Dielectric Constant, Electrical Resistance, DC Resistance & Conductance

Description: Method: ASTM D991, ASTM D257, ASTM D150

ILT-U-539Dielectric strength and leakage current

Description: Method: CSA 195, CSA 109

ILT-U-1094Dielectric strength Test

Description: Dielectric strength Test Method: IEC 60335-1

ILT-U-119Dielectric test and Temperature rise test

Description: IEC 60439-1 Method: IEC 60439-1

ILT-U-1864Digital Cameras – Noise measurements

Description: Detailed noise; and the signal to noise value for different grey levels Method: ISO 15739

ILT-U-1855Digital Cameras – OECF measurement

Description: Maximum contrast; Gamma; The signal to noise value for different grey levels; and ISO speed of the camera Method: ISO 14524

ILT-U-974Directive 2011/65/EU, RoHS2.

Description: Pb and Cd determination by atomic absorption or ICP; Hg determination by atomic absorption, cold vapor generator or ICP; Hexavalent Chromium determination by UV-VIS spectrophotometry; PBBs and PBDEs determination by gas chromatography; and Determination of lead, cadmium, mercury, chromium and bromine by XRF spectroscopy. Method: RoHS2

ILT-U-1995Domestic cooking appliances burning gas determinations

Description: Combustion and Consumption Method: EN 30-1-1

ILT-U-2295Electric and optical fibre cables determinations. Elongation at low temperature for insulations and sheaths

Description:
Standard :

ILT-U-2298Electric and optical fibre cables determinations. Measurement of carbon black and/or mineral filler in polyethylene compounds

Description:
Standard :

ILT-U-2294Electric and optical fibre cables determinations. Mineral oil immersion tests for sheaths

Description:
Standard :

ILT-U-2239Electric determination. 1A

Description: All determinations (2000hs aging test) Method: UNIT 1160

ILT-U-2238Electric determination. 1B

Description: Cable. All determinations (except fire propagation test if applicable) Method: NM 247-3

ILT-U-2237Electric determination. 1C

Description: Cable Method: NM 247-5

ILT-U-1960Electric determination. 1D

Description: Dielectric Test – AC test Method: IEC 60903

ILT-U-2191Electric determination. 1E

Description: Displacement factor; Lumen maintenance; and Endurance tests in Led lamp Method: IEC 62612

ILT-U-2287Electric determinations

Description:
Standard :

ILT-U-2288Electric determinations

Description:
Standard :

ILT-U-2289Electric determinations

Description:
Standard :

ILT-U-2290Electric determinations

Description:
Standard :

ILT-U-644Electric iron determinations

Description: Resistance of insulating material to abnormal heat, to fire and to tracking; Method: SASO 2815

ILT-U-645Electric kettle determinations

Description: Moisture resistance; Screws and connections and Supply connection and external flexible cords Method: IEC 60335-1, IEC 60335-2-15

ILT-U-1802Electric storage water-heater determinations

Description: General conditions for measurements; measurements of stored water temperatures; measurement of energy consumption; verification of the actual capacity; standing loss per 24 h; hot water output; and reheating time Method: IEC 60379

ILT-U-407Electrical and Photometric Measurements

Description: Photometric properties as a function of temperature for LED light engines and integral lamps. Life span of a lamp; determination of the colorometric parameters during the aging procedure; the effect of the variation of temperature and humidity parameters on the lamp during it’s life time; and electrical parameters variation during the aging process. Method: IESNA LM 82

ILT-U-2124Electrical and photometric measurements. 1A

Description: Input Electrical Parameters: Operating current (A); Real power (W); Light efficiency (lm / W); Operating voltage (V) Photometric and Chromatic Parameters: Initial luminous flux (lm); Color temperature (K); Color coordinates (x, y); Color Rendering Index (CRI) Spectral Curve Method: IESNA LM-09

ILT-U-2123Electrical and photometric measurements. 1B

Description: Input Electrical Parameters: Operating current (A); Real power (W); Light efficiency (lm / W); Operating voltage (V) Photometric and Chromatic Parameters: Initial luminous flux (lm); Color temperature (K); Color coordinates (x, y); Color Rendering Index (CRI) Spectral Curve Method: IESNA LM-51

ILT-U-2122Electrical and photometric measurements. 1C

Description: Input Electrical Parameters: Operating current (A); Real power (W); Light efficiency (lm / W); Total harmonic distortion in current (%); Power factor (FP) Photometric and Chromatic Parameters: Initial luminous flux (lm); Color temperature (K); Color coordinates (x, y); Color Rendering Index (CRI) Spectral Curve Method: IESNA LM-66

ILT-U-910Electrical appliances determination. 1A

Description: Power Input and Current;Insulation resistance;Protection against active parts; and Heating Method: IEC 60335-1, IEC 60598-1

ILT-U-1462Electrical appliances determination. 1B

Description: Power Cord Flexibility Tester; Stability Tester; and Mechanical Impact test Method: IEC 60335-1

ILT-U-1463Electrical appliances determination. 1C

Description: Power Input and Current; High Voltage Test; Leakage Current Test; Screws and Connections; and Provision for Earthing Method: IEC 60335-1

ILT-U-1708Electrical appliances determination. 1D

Description: Leakage current and voltage at operating temperature: Leakage current and voltage withstand; and operation in abnormal condition Method: IEC 60335-2-34

ILT-U-2241Electrical appliances determination. 1E

Description: Hot set test Method: 60811-2-1

ILT-U-2197Electrical appliances determination. 1F

Description: Vertical flame propagation for a single insulated wire or cable Method: IEC 60332-1

ILT-U-2198Electrical appliances determination. 1G

Description: Measurement of smoke density of cables burning Method: IEC 61034-2

ILT-U-2199Electrical appliances determination. 1H

Description: Vertical flame spread of vertically-mounted bunched wires or cables. Category C Method: IEC 60332-3-24

ILT-U-1816Electrical appliances determination. 1I

Description: Withstanding Voltage, and Insulation Resistance acc Method: ISO 16750-2

ILT-U-822Electrical appliances determination. 1J

Description: Area of the cross section of the electrical conductors; Insulation thicknesses and electrical conductors covered; Insulation Resistance; and Determination of mechanical effort to breakdown voltage. Method: NMX-J-312, NMX-J-177, NMX-J-129

ILT-U-1639Electrical appliances determination. 1K

Description: Marked; comparative tracking index (CTI); ball pressure; plugs; and cross sectional area for supply cord conductors Method: IEC 60335-1, IEC 60335-2-7, IEC 60695-2-10, CEI 23-50, IEC 60112

ILT-U-1264Electrical characteristic determinations – LED Driver for LED lamp

Description: Output Voltage and current, Total circuit power, Circuit power factor, and Supply current Method: IEC 62384

ILT-U-2320Electrical determinations

Cord extension set

ILT-U-2113Electrical determinations. 1A

Description: Classification, instructions, Dimensions, volumes, and weights measurement, Protection against access to live parts, Power input and current, Heating and protection against temperature rise, Leakage current and electric strength at operating temperature, Resistance to solid and foreign object, Moisture resistance, Ageing and life time, ?Endurance and Tripping Characteristics, Abnormal operation, Stability and mechanical hazards, Mechanical strength, Construction and Components, Internal wiring, Supply connection and external flexible cords, Terminals for external conductors, Screws and connections, Provision for earthing, Clearances, creepage distances and solid insulation, Resistance to heat and fire , Flame retardation, Resistance to rusting, Starting of motor-operated appliances, Electrical resistance, resistivity and conductivity, Performance requirements for Luminaire and modules, Energy efficiency, functionality and labelling requirements for lighting products , Breaking and making capabilities, Pressure test, Electrical properties: voltage, energy, resistance, impedance, capacity and capacitance, Temperature shock test, Tensile strength and elongation, and Short circuit and overload protection Method: IEC 60335-1, IEC 60969, IEC 60884-1, IEC 60227, IEC 61347-1

ILT-U-2103Electrical determinations. 1B

Description: Ball pressure, Dielectric Strength Test; Power Input and Curren and Leakage Current Test Method: IEC 60335-1, IEC 60745-1, IEC 60950-1, IEC 60598-1

ILT-U-2090Electrical determinations. 1C

Description: Insulation Resistance Test; Dielectric Strength Test; and Leakage Current Test Method: IEC 60335-1

ILT-U-2120Electrical equipment of machines determinations

Description: Verification of the continuity of the protective bonding circuit tests; Insulation resistance tests; Voltage tests; Protection against residual voltages; and Functional tests Method: IEC 60204-1

ILT-U-821Electrical resistance and dielectric strength determination

Description: Electrical resistance DC; and Dielectric strength Method: NMX-J-212, NMX-J-293

ILT-U-312Electrical resistance in conductors of insulated cables

Description: Annexed A. Method: IEC 60228

ILT-U-311Electrical resistance, conductivity and resistivity detrmination in electrical cables.

Description: IEC 60468 and NMX-J-212-ANCE Method: IEC 60468, NMX-J-212-ANCE

ILT-U-1638Electrical test determinations in toys samples. ET

Description: Electrical tests (excluding radiation/emi-emc tests) Method: IEC 62115

ILT-U-2119Electrical testing of Hand-Held Live-Line Insulating Tools. 1A

Description: Electrical testing of Hand-Held Live-Line Insulating Tools (Fiberglass-Reinforced Plastic (FRP) Method: ASTM F3121

ILT-U-1895Electricity metering equipment (AC). Electrical determinations

Description: All Test (except chap 6.10.5, 6.10.6, and 6.10.7) Method: IEC 62052-31, IEC 62052-1

ILT-U-1567EMC – AC Power-line Conducted Emission Measurement and Radiated Emission Measurements

Description: AC Power-line Conducted Emission Measurements (ANSI C63.4 clause 7); and Radiated Emission Measurements (ANSI C63.4 clause 8) Method: ANSI C63.4

ILT-U-1798Energy efficiency determination. 1A

Description: LED bulb Luminaire Method: SASO 2870, SASO 2902

ILT-U-692Energy efficiency determinations. 1B

Description: Ventilators Method: Portaria N° 20

ILT-U-1230Energy efficiency in electric water heater tank

Description: UNIT 1157 Method:

ILT-U-1247Energy Efficiency in single phase motors

Description: Method: IRAM 62409

ILT-U-956Energy efficiency test

Description: Air conditioning determination Method: ISO 5151

ILT-U-1246Energy efficiency three-phase motors

Description: Method: IRAM 62405

ILT-U-1825Environmental testing. 1A

Description: Environmental testing (Method 4). Gas concentration: SO2 (200 + /- 20) ppb, H2S (10 + /- 5) ppb, NO2 (200 + /- 20) ppb, and Cl2 (10 + /- 5) ppb. Temperature 25 +/- 1º C, and Humidity 75 +/- 3%. Test duration 4 days Method: IEC 60068-2-60

ILT-U-1552Environmental testing. 1B

Description: Environmental testing (16ms2 45min distributed in the whole range 10÷100 Hz; One or three axes) Method: EN 60068-2-6

ILT-U-1551Environmental testing. 1C

Description: Environmental testing (48h, 5%NaCl/35°C) Method: EN 60068- 2-11

ILT-U-1128Environmental testing. 1D

Description: 96h. 40ºC con 93%HR Method: IEC 60068-2-78

ILT-U-1127Environmental testing. 1E

Description: Total 10 cycles de 24h. Tmax. 65ºC y HR93% Tmín -10ºC IEC 60068-2-38 Method:

ILT-U-1126Environmental testing. 1F

Description: Cycle Db -6 cycles 12h +55ºC 12h. +25ºC 93% H.R IEC 60068-2-30 Method:

ILT-U-1125Environmental testing. 1G

Description: Cycle Nb Tmax. +150ºC Tmín -40ºC – 96h Method: IEC 60068-2-14

ILT-U-1124Environmental testing. 1H

Description: 150ºC – 168h Method: IEC 60068-2-2

ILT-U-1123Environmental testing. 1I

Description: 40ºC – 96h Method: IEC 60068-2-1

ILT-U-2051ESD, Garment qualification

Description: Point to point resistance (Rpp); Groundable point resistance (Rpgp); and Body contact point resistance (BCP) Method: ANSI/ESD STM2.1

ILT-U-2057ESD, Gloves and finger cot resistance qualification

Description: ESD, Glove and finger cot resistance qualification Method: ANSI/ESD STM15.1

ILT-U-2053ESD, Planar materials determinations

Description: Two-point resistance; Surface resistivity; and Volume resistivity Method: ANSI/ESD STM 11.12, ANSI/ESD STM 11.13, ANSI/ESD STM 11.11

ILT-U-2054ESD, Resistance through a person to ground

Description: ESD, Flooring Qualification Method: ANSI/ESD STM 97.1

ILT-U-2052ESD, Resistance to ground. ET

Description: Footwear qualification Method: ANSI/ESD STM9.1

ILT-U-333Fibre Optic connector determination

Description: Insertion loss measurement Method: IEC 61300-3-4, IEC 61280-4-1

ILT-U-1700Fire Hazard testing

Description: Glowing/hot-wire and Needle-flame test Method: IEC 60695-2-11, IEC 60695-11-5

ILT-U-290Flashover characteristics in wire and cable

Description: Clause 9.1, 9.3, 9.4 and 9.5 Method: UL 2556

ILT-U-995Flexural properties of unreinforced plastic and electrical insulating materials

Description: Flexural properties of unreinforced plastic and electrical insulating materials Method: ASTM D790

ILT-U-173General and safety requirements of Lamp controlgear

Description: IEC 61347-1 Method: IEC 61347-1

ILT-E-02Glowing/hot-wire test

Description: IEC 60695-2-10 Method: IEC 60695-2-10

ILT-U-1701Grinder determinations

Description: Grinder Method: IEC 60745-1

ILT-U-1425Hair dryer determinations – Sound power

Description: Sound power Method: NBR 13910-2-2

ILT-U-1340Halogenated compounds and ashes determinations

Description: Ashes; and halogenated acid gases Method: IEC 60811-605, IEC 60754-1

ILT-U-2028HF (Halogen) in semiconductor device determination

Description: HF (Halogen) Method: EN 14582

ILT-U-724Hot set test for cross-linked materials

Description: Method: EN 60811-507

ILT-U-1803Household refrigerating determinations

Description: Classification; determination of linear dimensions, volumes and areas; general test conditions; testing storages temperatures; energy consumption test; and temperature rise test Method: IEC 62552

ILT-U-1275Immunity to ESD discharge

Description: ESD discharge Method:

ILT-U-1702Impact drills determinations

Description: Impact drills Method: IEC 60745-2-1

ILT-U-582input power (DC) and output power (AC) for performance calculations (Photovoltaic)

Description: Method: IEC 61683

ILT-U-385Insulation resistance

Description: Clause 2.6 Method: IEC 60432-1

ILT-U-326Insulation resistance determination in electrical switches for household and similar fixed

Description: Terminals (clause 12) Method: IEC 60669-1

ILT-U-1858Insulation/screen moisture content determination in cable

Description: Insulation/screen moisture content Method: BS 7912

ILT-U-352IP code Test in external lighting

Description: IEC 60529 Method: IEC 60529

ILT-U-2125Lamp ballast Measurements

Description: Starting current rms (A); Starting voltage rms (V); Operating voltage (V); Operating current (A); Total harmonic distortion in current (%); Total harmonic distortion in tension (%); Real Power (input) (W); Power Factor; Cosj; Output voltage (V); Output current (A); Output Crest Factor (current); Actual Power Output (W); Power losses at nominal input voltage (W) (Pentrada – Psalida); Ballast Factor; Extinction voltage (V) Method: ANSI C82.6

ILT-U-1407Lamp caps determination. 1A

Description: Method: IEC 60061-3

ILT-U-1294Lamp caps determination. 1B

Description: Dimension Method: IEC 60061-1

ILT-U-1661LED light engines and lamps at temperature determination

Description: Measured temperature of Tb; measured temperature of Td; board temperature; ambient temperature; Input Power (W); Input Voltage (V); Input Current (A); luminous flux (lm); luminous efficacy (lm/W); CIE chromaticity (x,y); color rendering index; and correlated color temperature (k) Method: IESNA LM 82

ILT-U-1983Lighting determinations

Description: Accesiblility of live parts; Normal temperature test; Abnormal temperature testsAccesiblility of live parts; Normal temperature test; Abnormal temperature tests; and Needle flame Method: UL 1598

ILT-U-1051Loss of mass test for thermoplastic insulations and sheaths

Description: Method: IEC 60811-409

ILT-U-1465Luminaire determination. 1A

Description: Lampholders clause 4.4 Method: IEC 60598-1

ILT-U-1788Luminaire determination. 1B

Description: Emergency luminaire Method: IEC 60598-2-22

ILT-U-1786Luminaire determination. 1C

Description: Portable LED outdoor luminaire Method: IEC 60598-2-4

ILT-U-1691Luminaire determination. 1D

Description: fixed LED outdoor luminaire Method: IEC 60598-2-1

ILT-U-1569Luminaire determination. 1E

Description: Creepage distances and clearances (clause 11.2), and Thermal test (normal operation) (clause 12.4) Method: IEC 60598-1

ILT-U-1910Measurement of conductors

Description: Mass per unit length of conductor Method: EN 50182

ILT-U-1213Measurement of Luminous Intensity

Description: Regulatory used is the United Nations 3 and 23 Method:

ILT-U-149Measuring thickness of Insulation and Insulation resistance determinations

Description: Polyvinyl chloride insulated cables of rated voltages up to 750 V Method: IEC 60227, IEC 60228, IEC 60227-3, IEC 60227-4, IEC 60227-5, IEC 60228-11

ILT-U-1590Medical electrical equipment

Description: Safety requirements Method: IEC 60601

ILT-U-2055Particle cleanliness Helmke drum

Description: Particle cleanliness Helmke drum Method: IES-RP-CC003.2

ILT-U-2276Photometry determination

Descripcion:
Norma :

ILT-U-2277Photometry determination

Descripcion:
Norma :

ILT-U-2278Photometry determination

Descripcion:
Norma :

ILT-U-2135Photovoltaic modules determinations

Description: Performance at STC (MQT 06.1 ) Method: EN 61215-1-1, EN 61215-2

ILT-U-1464Plug determination

Description: Heat resistance test; and Mechanical Strength Method: SASO 2203, SASO 443

ILT-U-408Plugs, receptacles, manual switches determinations

Description: Dielectric strength, Temperature rise; Temperature rise; and Incandescent Wire Method: NTC 1337, NTC 5283, NTC 1650

ILT-U-1699Portable heating tools determination

Description: Portable heating tools Method: IEC 60335-2-45

ILT-U-384Power input and current, leakage current and electric strength, provision for earthing and protection against access to live parts

Description: IEC 60335-1 Clause 8.1.1, 10, 16.2, 16.3, 27.5, & IEC 61558-1 Clause 24.4 Method: IEC 60335-1, IEC 61558

ILT-U-419Power input, electric strength and leakage current and cross sectional area for supply cord conductors

Description: IEC 60335-1 Method: IEC 60335-1

ILT-U-2116Power meter box

Description: Verification of thermal stability – resistance to aging Method: NBR 15820

ILT-U-563Radiated emission and conducted emission determinations

Description: Method: CISPR 25

ILT-U-572Radiated emissions test and conducted emissions

Description: Method: ISO 11452, ISO 7637-2

ILT-U-1558Rapid temperature change determination

Description: Thermal Shock – Na test Method: IEC 60068-2-14

ILT-U-2131Resistivity of Electrical Conductor Materials. EL

Description: Resistivity Method: ASTM B193

ILT-U-053Restriction of the use of certain hazardous substances in electrical and electronic equipment. (Directive 2011/65/EU, RoHS2)

Description: Pb; Cd; Hg; Hexavalent Chromium; and phthalate (DIBP, DBP, BBP, DEHP) Method: IEC 62321-4, IEC 62321-5, IEC 62321-7-1, IEC 62321-7-2, IEC 62321-8

ILT-U-1692Safety of electrical appliances

Description: Method:

ILT-U-1592Safety requirements for electrical equipment for measurement, control, and laboratory use

Description: Volt-Amperometric clamp determinations Method: IEC 61010

ILT-U-386Safety requirements of audio, video and similar electronic apparatus

Description: All test Method: IEC 60065

ILT-U-791Salt mist determination

Description: Salt mist (96 H) Method: IEC 60068-2-11

ILT-U-553Self-ballasted compact fluorescent lamps for general lighting services

Description: Clause 5; 6; and 7 Method: IEC 60969

ILT-U-1972Self-ballasted fluorescent lamps for general lighting services

Description: All determinations Method: IEC 60968

ILT-U-1873Shock testing

Description: Level 1. Waveform: semi-sinusoidal; Maximum acceleration: 25 g.; Pulse duration: 6 ms; Number of repetitions per verse: 10; and Duration: 2 minutes Method: IEC 60068-2-27

ILT-U-722Shrinkage for insulations and sheaths

Description: Shrinkage for insulations and sheaths Method: EN 60811-503, IEC 60811-502, EN 60811-502

ILT-U-379Socket outlet test

Description: IEC 60884-1 Method: IEC 60884-1

ILT-U-1698Steam cleaners determinations

Description: steam cleaners Method: IEC 60335-2-79

ILT-U-1665Surge immunity test determinations

Description: Surge generator Method: IEC 61000-4-5

ILT-U-370Switch test

Description: IEC 60669-1 Method: IEC 60669-1

ILT-S-03Tensile strength and elongation at break test of PVC cable

Description: IEC 60227-2 and IEC (60811-501) 60811-1-1, chapter 9. Method: IEC 60227-2, IEC 60811-1-1

ILT-U-059Tensile strength and elongation at break test of PVC cables

Description: IEC 60227-2 and IEC 60811-1-1, chapter 9 Method: IEC 60227-2, IEC 60811-1-1

ILT-U-181Tensile stress at break and elongation of semiconducting screens, insulation and protective covers electrical conductors

Description: IEC-60811-1-1-2001 clause 9 – IEC 60811-501-2012 Method: IEC 60811-1-1, IEC 60811-501

ILT-U-1970Terminal block determinations

Description: Clause 9.2 / 9.3 / 9.4 and 9.5 Method:

ILT-U-533Test luminaire photometry

Description: Electrical Characteristics (at rated voltage), Efficacy (lumen/watt) and Photometric parameters. Method: IESNA LM 79

ILT-U-183Test shrinkage (shrinkage)

Description: IEC 60811-1-3-2001 Clause 10 – IEC 60811-502-2012 Method: IEC 60811-1-3, IEC 60811-502

ILT-U-415Testing of earthing

Description: IEC 60950 Method: IEC 60950

ILT-U-038Thermal stability of PVC insulation or sheath of cables

Description: IEC 60811-3-2 Method: IEC 60811-3-2

ILT-U-1969Thermomagnetic key determinations

Description: Clause 9.4 / 9.5.1 and 9.5.3 Method: IEC 60898-1

ILT-U-182Thickness determination of electrical conductors covered

Description: IEC 60811-1-1-2001 Clause 8.2 – IEC 60811-202-2012 Method: IEC 60811-1-1, IEC 60811-202

ILT-U-844Torsion resistance determination in sodium vapor lamp

Description: Torsion resistance Method: IEC 62035

ILT-U-1973Torsion resistance in lamp-holder

Description: Torsion resistance. Clause 5.2.11.2 Method: UL 496

ILT-U-1971Torsion resistance in Led lamp

Description: Torsion resistance of unused lamps (E27). Clause 9.1 (aging 200 hs.) Method: IEC 62560

ILT-U-199Tracking indices test

Description: Method for the determination of the proof and the comparative tracking indices (CTI) of solid insulating materials Method: IEC 60112, IEC 60695-10-2, GB/T 5169.21, GB/T 4207

ILT-S-02Tracking indices test and Ball pressure test

Description: IEC 60112 and IEC 60695-10.2 Method: IEC 60112, IEC 60695, GB/T 4207, GB/T 5169.21

ILT-U-1955Transportable tools determinations

Description: Protection against active parts, and Leakage current Method: IEC 62841-1

ILT-U-1169TV LCD Determinations

Description: Anex A – Measurement of visual diagonal; Anex C – Power Off “stand by”, according to Portaria INMETRO 085/09 Anex A – Measurement of visual diagonal; Anexo – Power “on”; Anex C – Power off “stand by”, according to Portaria INMETRO 427/14 Method:

ILT-U-1089TVs determinations

Description: Consumption measurement in “stand by”; and Measurement of visual angle. Method: Portaria 85:2009

ILT-U-1824USB Dedicated Charging Port Test

Description: DCP Overshoot and Undershoot Voltage Test; DCP Handshaking Test; DCP Resistance and Capacitance Tests; and DCP Voltage and Current Method: Battery Charging Specification revision 1.2, IEC 62680-1-1

ILT-U-1823USB Type-C Chargers. 1C

Description: Initial Voltage Test, and USB Type-C Current Adv Test Method: USB Type C Functional Test Specification, IEC 62680-1-3

ILT-U-1826USB Type-C Chargers. 1D

Description: Low level contact resistance, Dielectric strength, Insulation resistance, Resistance between contacts under high current conditions Method: IEC 62680-1-3

ILT-U-1696Vacuum cleaners determinations

Description: vacuum cleaners Method: IEC 60335-2-2

ILT-U-2055Vehicle electric components determinations

Description: Direct Current Test; Overvoltage Test; Superimposed Alternating Voltage Test; Slow Decrease and Increase of Supply Voltage; Discontinuities in supply Voltage Test; Reversed voltage Test; Withstand Voltage Test; and Insulation Resistance Test Method: ISO 16750-1

ILT-U-1872Vibration testing

Description: Level 1. Minimum frequency: 10 Hz.; o Frequency f1: 20 Hz Frequency f2: 1000 Hz; o Maximum frequency: 2000 Hz.; o RMS value: 3.35 g; o ASD form (flat between f1 and f2): 0.01 g2 / Hz; o Initial slope of 10 Hz: +6 dB / octave; Final slope between 1000 and 2000 Hz: -24 dB / octave; and Duration: 20 minutes Method: IEC 60068-2-64

ILT-U-1859Washing machines electrical determinations

Description: Performance of washing machines Method: IEC 60456, IEC 60335-2-7

ILT-U-437Wattage measurements of electric appliances

Description: IEC 60335-2-14. Method: IEC 60335-1

ILT-U-1598Wire determinations – Hot Set Test For Cross-Linked Materials

Description: Hot Set Test For Cross-Linked Materials Method: IEC 60811-507

ILT-U-1599Wire determinations – Mechanical properties of insulation and sheathing compounds

Description: Test for determining the mechanical properties of insulation and sheathing compounds Method: IEC 60811-501

ILT-U-1609Wire determinations – Resistance of conductor

Description: Resistance of conductor Method: IEC 60227

ILT-U-1597Wire determinations – Thermal stability test for PVC insulations and PVC sheaths

Description: Thermal stability test for PVC insulations and PVC sheaths Method: IEC 60811-405

ILT-U-1474Wire determinations. 1A

Description: Insulation thickness; Thickness of non-metallic sheath (insulation covered and electrical conductors); Overall dimensions; Insulation resistance; Water absorption test – electrical method; Loss of mass test; Thermal ageing of insulation and sheath; Heat shrinking of insulation and sheath; and Thermal shock test on insulation and sheath Method: EN 60811-509, EN 60811-502, EN 60811-401, EN 60811-402, EN 60811-409, EN 60811-203, EN 60811-201, EN 60811-202, CEI 60502

ILT-U-1596Wire determinations. 1B

Description: Conductor resistance; Insulation thickness; Outside cable diameter; Conductor diameter; Strip force; Abrasión test; Resistance to fíame propagation; Insulation volume resistivity; Withstand voltage; Shrinkage by heat; Pressure test at high temperature; Thermal overload; Short term heat ageing 240 h; Long term heat ageing 3 000 h; Low temperature winding; Cold impact; Durability of cable marking; Resistance to hot water; Resistance to liquid chemicals; Test Method 2 — Resistance to liquid chemicals Fluid compatibility; and Temperature and humidity Method: ISO 6722

ILT-U-1601Wire determinations. 1C

Description: Sliding behavior of the cable; Bending force of the cable; Insulation notch strength; Stress test; Thermal stability in the wound state; Ciclic bending; Kink test; Damp heat, constant (hydrolysis test); and Resistance to chemicals and wrapping tapes Method: LV 112-1, VW 60306-1, ISO 14572

ILT-U-456Wires determination. 1D

Description: Determination of the cross-sectional area of electrical conductors by the mass (weight) method, Determination of thickness of insulation and covers of electrical conductors, Determination of electrical resistance to direct current, Dielectric strength or voltage applied to insulation, Insulation resistance, Insulation and jacket physical properties before and after aging in air Method: UL 2556, NTC 5786

Category of Schemes
ILT – Interlaboratory Test
Scroll to Top