• Follow us
ILT-U-1175Alpha Olefin Sulphonate (AOS) determinations

Description: Alpha Olefin Sulphonate (AOS): Active matter and Free Alkalinity as Sodium Hydroxide Method: IS 15072, IS 4956

ILT-U-868Ammonium concentration determination

Description: Method:

ILT-U-285Ammonium Nitrate, % purity by titration after treatment with formaldehyde

Description: MIL-A-175C Method: MIL-A-175C

ILT-U-1852Analysis of ash and volatile combustible matter of coal.

Description: Analysis of ash and volatile combustible matter Method: ISO 562, ISO 1171

ILT-U-153Analysis of KCl, NaCl,MgCl2,CaCl2 & H2O in fertilizers. CH

Description: Potassium chloride Method:

ILT-U-381Chlorine – Bomb combustion & ISE, Fluorine – Bomb combustion & ISE and Minor and Major Elements (Coal Ash). CH

Description: XRF in Coal Method: ASTM D4208, ASTM D3761

ILT-U-358Coal determnations. CH

Description: Moisture; Total in Coal; Ash Content of Petroleum Products; Volatile Matter; and Sulfur Total Method: ASTM D3302, ASTM D482, ASTM D3175, ASTM D3177

ILT-U-1458Cooper ore determinations

Description: Method:

ILT-U-886Cu and Zn determinations

Description: Method:

ILT-U-1668Determination in Sodium Hydroxide

Description: Determination of concentration and carbonates; chlorides; and iron Method:

ILT-U-1450Determination of antimony in antimony trioxide

Description: Antimony concentration – Sb2O3 Method:

ILT-U-1608Determination of bicarbonate

Description: Method:

ILT-U-359Determination of Brookfield Viscosity and hardness shore A

Description: Hardness Shore A; and Viscosity Method: ISO 7619, ISO 2555

ILT-U-114Determination of calcium oxide

Description: Method:

ILT-U-1844Determination of Chloroform Soluble Extractive in Resinous and polymeric coatings use as food contacting material.CH

Description: Simulant: Deionized Water, EtOH 8%, n-Heptane Method: 21 CFR 175.300

ILT-U-1929Determination of Ethylbenzene. CH

Description: GC-mass, adsorbed on activated carbon tubes in air samples. Method:

ILT-U-658Determination of glyphosate

Description: HPLC Method: HPLC

ILT-U-1347Determination of metals in ethanol

Description: Copper; Iron; and Sodium in ethanol Method:

ILT-U-596Determination of peel test for a flexible – bonded – to – rigid test specimen assembly

Description: 90° peel Method: EN 28510-1

ILT-A-01Determination of the cyanide concentration in a reference solution

Description: SM 4500-CN-E Method: SM 4500-CN-E

ILT-U-1846Determination of Total Extractives from water and n-Hexane for rubber articles use as food contacting material. CH

Description: Deionized Water, n-Hexane Method: 21 CFR 177.2600

ILT-U-373Determinations in coal

Description: Coal Sample Preparation, Moisture in the Analysis Sample, Ash Content, Volatile Matter and Total Sulphur by IR Spectroscopy Method: ASTM D346, ASTM D3174, ASTM D3175, ASTM D4239,ASTM D3177

ILT-U-1054Determinations in Glycerin

Description: Refractive Index Method:

ILT-U-1521Determinations in lithium brine. CH

Description: Density at 25 °C; Calcium; Chloride; Copper; Total dissolved solids; Strontium; Sodium; Chrome; Sulfates; Iron; Aluminum; Lithium; Arsenic; Magnesium; Barium; Manganese; Lead; Zinc; Boron; and Potassium Method:

ILT-U-330Determinations in phosphate rock and potassium sulphate. CH

Description: Potassium oxide; Water soluble potassium; Sulfur Sulfate (S); and P2O5 Method:

ILT-U-1053Determinations in surfactants

Description: Free fatty acid; Free alkalinity; Volatile matter at 1050; Total active matter (extraction by ethanol); and Acidity Method:

ILT-U-862Determinations in water and fertilizer. CH

Description: Free residual chlorine, Total dissolved solids, and Soluble citric acid phosphates Method:

ILT-U-1847Different determinations for Nylon Resins use as food contacting material. CH

Description: Extractable Fractions in Nylon Resins (Deionized Water extractives, 95% ethanol extractives, Ethyl acetate extractives, and Benzene extractives); Specific Gravity in Nylon; Melting Point in Nylon Resins; and Solubility in Boiling HCl in Nylon Resins Method: 21 CFR 177.1500

ILT-U-1845Different determinations for Olefin polymers use as food contacting material. CH

Description: Determination of Extractable Fraction for Olefin polymers (Hexane); Determination of Soluble Fraction for Olefin polymers (Xylene); Determination of Density for Olefin polymers; and Determination of Melting Point for Olefin polymers Method: 21 CFR 177.1520

ILT-U-1233FTIR characterization of asbests

Description: Method:

ILT-U-1239Glyphosate determination. CH

Description: Active content determination; Moisture content determination; Appearance determination; and Formaldehyde content determination. Method:

ILT-U-1174Linear Alkyl Benzene Sulphonic (LABSA) determinations. CH

Description: Linear Alkyl Benzene Sulphonic acid (LABSA): Active matter and Free Oil (Non Detergent Organic matter) Method: ASTM D3049, IS 8401

ILT-U-642Lithium brine determinations

Description: Chlorides; Sulfates; Total dissolved solids; Total Suspended Solids; % Humidity; Reactive Phosphorus / Phosphates; Determination of elements by ICP (Li, Ca, Mg, B, Na, K, Ba, Sr, Fe, and Mn); Conductivity; pH; Density; Carbonates; Bicarbonates; Hydroxides; Total alkalinity; and Hardness Method:

ILT-U-863Metal determinations in fertilizers. CH

Description: Zinc , Potassium, Calcium, Copper, Manganese, Phosphorus, Iron, Nickel, Cobalt, and Boron Method:

ILT-U-944Metals determinations in air sample. CH

Description: Lead and Metals Method:

ILT-U-327Methanol determination in liquid for wipers. CH

Description: Method:

ILT-U-1553Migration test in gloves. CH

Description: EN 1186; RDC N° 105; and RDC N° 51 Method: EN 1186

ILT-U-1694Migration test. CH

Description: Total simulant migration B: Yes. Aqueous foods acid-Acetic acids; Specific mission of metals and others elements: simulant acetic acid %; and Color change rating Method: EN 1186, EN 13130, GMC 15, Resolution RDC Nº52

ILT-U-341Migration total and specific determinations

Description: Determination of overall migrat on synthetic samples (simulating matrix: ethanol 10%; 20%; 50%, acetic acid 3%, and distilled water); and specific migration: Determination of Ag, B, Ba, Cd, Co, Cr, Cu, Pb, Zn, As, Hg, Sb, Sn e F (aimulating matrix: acetic acid 3%.) Method: EN 1186, EN 13130

ILT-U-1831NOx reduction agent AUS 32 determination. CH

Description: Urea Content; Density@ 20 deg.; Refractive Index; Alkalinity; Biuret content; Insoluble Matter content; Identity (FTIR); Aldehyde Content; Phosphate content; Elemental Analysis : (Elemental Contamination); Calcium; Iron; Copper; Zinc; Chromium; Nickel; Aluminium; Magnesium; Sodium; and Pottasium Method: ISO 22241-2

ILT-U-2027Organic Tin compounds in pesticides determination. CH

Description: Organic Tin compounds Method:

ILT-U-1261Oxalic acid determination

Description: Method:

ILT-U-084Peel strength test of Adhesives

Description: T-Peel Test Method: ASTM D1876

ILT-U-569Physical determinations in tobacco products. CH

Description: Method: ISO 6565, ISO 2971

ILT-U-1917Qualitative analysis of solvents mixture. CH

Description: GC/MS Scan Industrial. EPA 8015 Method D Method: EPA 8015


Description: REACH SVHC Method:

ILT-U-889Soda ash determinations

Description: Total Alkalinity as Na2Co3 (Assay), Chlorides as NaCl, Sulphates as Na2So4, Mater Insoluble in water, and Loss at 250ºC Method: IS 251

ILT-U-110Sodium Carbonate and Sodium Bicarbonate Determination

Description: Sodium Carbonate: Total Alkalinity – Trimetric; NaCl – Trimetric; Na2So4 – Trimetric; Fe – Photometric; Water insolubles; and Bulk density Sodium Bicarbonate: NaHCo3; Na2Co3; Cl – Trimetric; So42 – Photometric; Water insolubles; and Valoration Method:

ILT-U-284Standardization of Alkaline hydroxide solution (0.1N – 1.0N)

Description: ASTM E200 Method: ASTM E200

ILT-U-1922Taxonomic identification of benthic macroinvertebrates

Description: Method:

ILT-U-237Test Method for 90 Degree Peel Resistance of Adhesives

Description: ASTM D6862 Method: ASTM D6862

ILT-U-1132Total N, P2O5, K2O determinations in liquid fertilizer (Vinasse). CH

Description: Vinasse sample Method:

ILT-U-2041Transformer oil determination. 1A CH

Description: Dissipation factor (delta tangent at 90º) Method: ASTM D924

ILT-U-2040Transformer oil determination. 1B CH

Description: Neutralization number analysis Method: ASTM D664

ILT-U-2039Transformer oil determination. 1C CH

Description: Particle count and resulting ISO code Method: ISO 4406

ILT-U-2038Transformer oil determination. 1D CH

Description: Corrosive sulfur (Method B) Method: ASTM D1275

ILT-U-2037Transformer oil determination. 1E CH

Description: DBPC Inhibitor content Method: ASTM D4768

ILT-U-2036Transformer oil determination. 1F CH

Description: Interfacial tension measurement Method: ASTM D971

ILT-U-2032Transformer oil determination. 1G CH

Description: Dissolved Gas Method: ASTM D3612

ILT-U-2033Transformer oil determination. 1H CH

Description: Products of the degradation of cellulosic materials Method: ASTM D5837

ILT-U-2034Transformer oil determination. 1J CH

Description: PCBs content Method: ASTM D4059

ILT-U-2035Transformer oil determination. 1K CH

Description: Moisture content Method: ASTM D1533

ILT-U-380Ultimate Analysis of Coal, Carbon, Hydrogen. CH

Description: Instrumental Method, Hardgrove Index (HGI) in coal Method: ASTM D3176, ASTM D 3177, ASTM D5373, ASTM D409


Description: ASTM D 445 Method: ASTM D445

ILT-U-904Viscosity and Density determination in liquid adhesive

Description: Method: ISO 2555, ASTM D2556, ASTM D1200, EN 452, EN 2811, ASTM D1475, ASTM D4212, ISO 2431

ILT-U-423Viscosity determining corrosion inhibitors. CH

Description: ASTM D2196 Method: ASTM D2196

ILT-U-236Viscosity using a Brookfield Viscometer

Description: ASTM D2556 Method: ASTM D2556

Category of Schemes
ILT – Interlaboratory Test
Scroll to Top