ILT Interlaboratory Test | Proveedor de ensayos de aptitud por comparación

Metals
Request
Proficiency customized Code Comments Standard Select
Impact test in CHARPY type, V-notch specimens ILT-E-05 High Level enery, Srike 8mm, and Temperature 20 °c ASTM E23
ISO 148-1
EN 10045-1
GB/T 229
GOSTO 9454
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels ILT-E-06 ASTM A262 Practice A and E ASTM A262
Tension testing of steel ILT-E-08 (ESP) ASTM E8M ISO 6892-1
EN 10002-1
IRAM IAS U500 102
GB/T 228.1
GOST 1497
ASTM E8
TCVN 197-1
Average grain size test on steels ILT-E-09 (ESP) ASTM E112 ASTM E112
ISO 643
Test of Salt Spray ILT-E-16 ASTM B117 ASTM B117
Evaluation of pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking ILT-E-21 (ESP) NACE TM0284 NACE TM 0284
Chemical Analysis of Steel samples ILT-E-22 (ESP) ASTM E1086 and ASTM E415 ASTM E415
ASTM E1086
Determining the Inclusion Content of Steel ILT-E-23 ASTM E45 ASTM E45
Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution (method A) ILT-E-27 Method A. ASTM G48
Test of charge to break Sling ILT-U-001 (ESP) ASME B30.9:2006 ASME B30.9
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels ILT-U-018 ASTM A262 Practice A and E ASTM A262
Metallic materials – Bend test ILT-U-027 (ESP) NMX-B-113 NMX-B-113
Testing Water Resistance of Coatings Using Water Fog Apparatus ILT-U-032 ASTM D1735 ASTM D1735
Determinations for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement ILT-U-033 (ESP) ASTM A615 ASTM A615
Determination of carbon and sulphide by combustion of induction furnace and infrared detection, and X-Ray Fluorescence. ILT-U-035 (ESP) ASTM E 1019 /ASTM E 1085 ASTM E1019
ASTM E1085
Determining the Inclusion Content of Steel ILT-U-040 Manual method ASTM E45
Determining Volume Fraction by Systematic Manual Point Count ILT-U-054 (ESP) ASTM E562 ASTM E562
Chemical Analysis of Steel samples ILT-U-067 (ESP) ASTM E1086 and ASTM E415 ASTM E415
ASTM E1019
Wire – Simple torsion test ILT-U-092 (ESP) ISO 7800 ISO 7800
Metallic and oxide coating. Measurement of coating thickness ILT-U-101 Microscopical method ISO 1463
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels ILT-U-102 ASTM A262 Practice A, B, C and E ASTM A262
Pending test for low alloy steel and Bar geometry measurement for low alloy steel ILT-U-104 (ESP) BS EN ISO15630-1 EN ISO 15630-1
Pull-of test for adhesion ILT-U-106 (ESP) ISO 4624 ISO 4624
Analysis of determination grain size in steel ILT-U-107 Using image analyzer software ASTM E112
Chemical analysis of metals ILT-U-1137 EN 14726
Immersion corrosion test ILT-U-118 (ESP) ASTM G31 ASTM G31
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels ILT-U-124 ASTM A262 Practice B and C ASTM A262
Determination of tension steel rebar ILT-U-125 (ESP) ASTM A370 ASTM A370
Silicon gravimetric analysis ILT-U-133 (ESP) ASTM E350 ASTM E350
Determining the occurrence of fractures using the method DWTT ILT-U-145 ASTM E436
(ESP) EN 10274
API 5L3-1996
Evaluating the Microstructure of Graphite in Iron Castings ILT-U-154 (ESP) ASTM A247 ASTM A247
Tension testing on steel ILT-U-156 (ESP) ASTM E 8M ASTM E8
ISO 6892-1
EN 10002-1
IRAM IAS U500 102
GB/T 228.1
GOST 1497
TCVN 197-1
Analysis of determination grain size ILT-U-157 Aluminum sample ASTM E112
Tension testing – Autographic method ILT-U-165 clause 7.7.3 ASTM E8
ASTM E8M
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels ILT-U-171 ASTM A262 Practice E ASTM A262
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels ILT-U-172 ASTM A262 Practice B ASTM A262
Conductivity Test – aluminum sample ILT-U-190 (ESP) EN 2004-1 and ASTM E1004-09 EN 2004-1
ASTM E1004
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels ILT-U-196 ASTM A262 Practice C ASTM A262
Average grain size test on cooper ILT-U-203 (ESP) ISO 2624 ISO 2624
Determination of O, N, C, S, H by LECO analysis ILT-U-206 Determination of O, N, C, S, H by LECO analysis ASTM E1447
ASTM E2371
ASTM E1409
Continuously hot-dip coated steel flat products ILT-U-227 (ESP) EN 10346 EN 10346
Determination of film thickness (organic coating) ILT-U-255 7C method
Analysis of determination grain size in steel ILT-U-258 (ESP) ASTM E112 ASTM E112
Tensile Testing of Metallic Materials ILT-U-266 Method of Test at Elevated Temperatures (150 °c) ISO 6892-2
Nondestructive Measurement of Dry Film Thickness ILT-U-268 (ESP) ASTM D7091 ASTM D7091
Destructive tests on welds in metallic materials. Fracture tests ILT-U-273 (ESP) EN 1320 and ASME IX:2010/QW182. EN 1320
ASME IX / QW182
ISO 9017
Evaluation of pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking ILT-U-274 (ESP) NACE TM0284 NACE TM 0284
Corrosion test purpose in tents ILT-U-296 (ESP) NTMD – 0026 – A1 NTMD – 0026 – A1
Tension testing of steel wire ILT-U-313 ASTM E8 ASTM E8
Determination of Tin impurities. ILT-U-351 Determinations: Sb, Pb, Bi, Cu, Fe, As, In, Co, Zn, Ni, Al, S, Cd, Ag and others
Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution ILT-U-356 Method B ASTM G48
Pull-off test for adhesion ILT-U-383 Method E ASTM 4541
Analysis of determination grain size and phase balance ILT-U-410 Duplex materials ASTM E112
ASTM E562
Tensile Testing of Metallic Materials. ILT-U-421 Method of Test at Elevated Temperatures (980 °c) ASTM E21
Viscosity determining corrosion inhibitors ILT-U-423 (ESP) ASTM D2196 ASTM D2196
Steels – Determination of depth of decarburization ILT-U-443 (ESP) EN ISO 3887 EN ISO 3887
Determination of resistance to intergranular corrosion of stainless steels (Method A) ILT-U-444 Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (Method A) EN ISO 3651-2
Microstructure of cast irons ILT-U-445 Graphite classification by visual analysis EN ISO 945-1
Metallographic determination of the Delta ferrite content in austenitic Semi-finished products ILT-U-447 Fusing test AVS E 63/01 A
Determining the relative corrosion resistance of metal samples exposed in a salt spray chamber. ILT-U-468 Appendix A5. ASTM G85
Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings ILT-U-486 (ESP) ASTM D 7091 and NCh-1007 Of. 1989. ASTM D7091
NCh-1007 Of. 1989.
CTOD – Crack tip opening displacement test of metallic materials ILT-U-489 (ESP) BS 7448. BS 7448-1
Corrosion tests in artificial atmospheres — Salt spray tests ILT-U-532 EN ISO 9227
ASTM B117
Determination of dezincification resistance of copper alloys with zinc ILT-U-535 ISO 6509
Impact test in CHARPY type, V-notch specimens ILT-U-561 High Level enery, Srike 8mm, and Temperature -40 °c ISO 148-1
ASTM E23
GOSTO 9454
GB/T 229
Determination of non-metallic inclusions ILT-U-562 DIN 50602
Determination of selenium concentration in selenium powder. ILT-U-586
Measuring Adhesion by Tape Test ILT-U-683 Method B – Cross Cut Test. ASTM D3359
Degree of Rusting on Painted Steel Surfaces test ILT-U-685 ASTM D610
Degree of Blistering of Paints test ILT-U-686 ASTM D714 ASTM D714
Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments ILT-U-687 Time test 120 hs ASTM D1654
Bending steel ILT-U-753 (ESP) Bend. ISO 7438
(ESP) VDA 238-100
(ESP) Nch 201
Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels ILT-U-758 ASTM A923
Analysis of concentrates of Iron Ore ILT-U-825 High grade Iron Ore.
Tensile Testing of Metallic Materials ILT-U-845 Method of Test at Elevated Temperatures (350 °c) ASTM E21
Chemical composition of manganese steel ILT-U-870 ASTM E2209
Tension testing on steel (Flat sample) ILT-U-006 Flat sample GB/T 228.1
ISO 6892
ASTM E8
GOST 1497
Bending test of steel ILT-U-017 (ESP) ASME SECC. IX ED. 2010 ASME SECC. IX
Wire determinations ILT-U-1000 ASTM B3
ASTM B193
Gold concentration ILT-U-1007 cupellation method.
Measuring the corrugations by manual method ILT-U-1011 Clause 7 and 8 ASTM A615
Linear-Elastic Plane-Strain Fracture Toughness K1c of Metallic Materials ILT-U-1035 ASTM E399
Linear-Elastic Plane-Strain Fracture Toughness KIc ILT-U-1036 SENB or CT (Metallic materials specimens) ASTM E1820
Measurement of Fatigue Crack Growth Rates ILT-U-1037 ASTM E647
Hardness test on arc welded joints ILT-U-1045 EN ISO 9015-1
Determination of the effective depth of hardening after nitriding ILT-U-1046 Clause 3. DIN 50190
Chemical Analysis of Steel samples ILT-U-1050 Vanadium and copper.
Determination of depth of decarburized layer ILT-U-1055 Depth of decarbuized ASTM E1077
Gold and silver determination ILT-U-1056 Au and Ag (Atomic absorption)
Determination of metals in minerals ILT-U-1057 Cu, Pb, Zn, As, Sb and Fe (Atomic Absorption)
Nick Break Test ILT-U-1059 API 1104
Tension test on aluminum ILT-U-1066 ASTM B557
IS 1608
ISO 6892
Determination of mass of zinc coating per unit area on galvanized pipes ILT-U-1091 Strip and weigh method ASTM A90
Nickel and chrome ore determinations ILT-U-1116
Chemical analysis of N, H and O ILT-U-1122 Determination of Hydrogen; and Oxygen by Infrared detection. Determination of Nitrogen by Thermal conductivity.
Coating mass determination ILT-U-1138 Hot dip galvanized coatings ISO 1460
Determination of resistance to humidity ILT-U-1140 ISO 6270-2
Tension Testing on steel (sheet sample) ILT-U-1176 Ultimate tensile strength; Upper Yield strength; and Elongation in % according ASTM A370
Analysis of concentrates of Rare earth elements (REE) in ore. ILT-U-1178 Rare earth elements (REE) in ore.
Drop-Weight Test to Determine Nil-Ductility Transition Temperature ILT-U-1220 Ferritic Steels ASTM E208
Compression Testing of Metallic Materials at Room Temperature ILT-U-1241 ASTM E9
Impact test in CHARPY type, V-notch specimens ILT-U-1250 High Level enery, Srike 8mm, and Temperature 20 °c ISO 148-1
ASTM E23
GB/T 229
GOSTO 9454
Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution (method A) ILT-U-1269 Method A. ASTM G48
Testing Water Resistance of Coatings in 100% Relative Humidity ILT-U-126 240 hours. ASTM D2247
Chemical Analysis of Steel samples ILT-U-1270 ASTM E1086
ASTM E415
Determination of Coating Mass in zinc coatings on steel wire ILT-U-1274 EN 10244-2
Bending welded steel sample ILT-U-1276 Bend ASTM E190
ASTM A370
ASME BPVC Section IX
Reinforcement steel bars for mechanical properties Rm and Re determinations ILT-U-1296 EN ISO 15630-1
Welded mesh for shear force determinations ILT-U-1297 ISO 15630-2
Determination of Emittance of Materials Near Room Temperature ILT-U-1328 Determination of Emittance of Materials Near Room. Temperature - Emissometer Model AE ASTM C1371
Corrosion in salt spray determination ILT-U-1331 ASTM D1654
NBR 8094
Surface discontinuities of bolts ILT-U-1348 microscopic method - requirements S1 ASTM F788
Determination of metals in metal chips concentrates ILT-U-1437 metals chips concentrate (Ni, Zn, Bi, Pb)
Impact test in CHARPY type, V-notch specimens ILT-U-1440 Low enery level, Srike 8mm, and Temperature 0 °c ASTM E23
GOSTO 9454
ISO 148-1
GB/T 229
Tensile test determination ILT-U-1467 EN ISO 15630-3
Chemical analysis of titanium samples ILT-U-1487
Chemical analysis of aluminum ILT-U-1529 Fe; Si; Zn; V; Cr; and Na
X-Ray Fluorescence in stainless steel ILT-U-1530 X-Ray Fluorescence: Mn; P; Si; Cr; Ni; Mo; Cu; V; and Nb ASTM E572
Chemical analysis of aluminum ILT-U-1550 Cu, Mn, Mg y Ni, Cr, Ti, Na and Li
Torsion, driving torque and pullout test on bone screws ILT-U-1554 Yield Torque; Maximum Torque; Breaking Angle; Insertion Torque; Removal Torque; and Maximum pullout load ASTM F543
Static test and fatigue in bone plates ILT-U-1555 ASTM F382
SSC four point bend ILT-U-1564 SSC NACE TM01-77 (met. B) e ASTM G39 (720 h) or SSC C-Ring (Solution A) NACE TM 0316
Determination of dry thickness ILT-U-1607 Painted sheet sample ASTM D5796
Determinations in construction steel bars ILT-U-1611 Tensile properties; bend performance; and surface geometry measurement BS 4449
Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution (method C) ILT-U-1667 Method C. ASTM G48
Bend testing of welds ILT-U-1706 AWS B4.0
Transverse tensile test – Destructive tests on welds in metallic materials ILT-U-1707 Transverse tensile test ISO 4136
Determination of mass loss of bulk material on drying in copper and zinc concentrates ILT-U-1751 Determination of mass loss of bulk material on drying ISO 10251
SSC (Sulfide stress cracking) test ILT-U-215 Method A – Solution A ANSI/NACE TM0177
Impact test in CHARPY type, V-notch specimens ILT-U-322 Medium enery level, Srike 2mm, and Temperature 20 °c ISO 148-1
ASTM E23
GB/T 229
GOSTO 9454
Hardness test on arc welded joints ILT-U-598 Impact ISO 9016
Macroscopic and microscopic examination of welds ILT-U-605 ISO 17639
Bend test – Destructive test on welds in metallic materials ILT-U-606 ISO 5173
Determining the mass loss and relative corrosion resistance of metal samples exposed in a salt spray chamber (CASS and NSS) ILT-U-611 Mass loss and relative corrosion resistance (CASS and NSS) EN ISO 9227
SSC (Sulfide stress cracking) test ILT-U-969 Method A - Solution B ANSI/NACE TM0177
Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys ILT-U-975 ASTM G28 - method A. ASTM G28
Bend testing – corrugated steel bar ILT-U-994 ASTM A615
Determination on copper cathodes ILT-U-066 BSI Method
Cooper ore determinations ILT-U-1458
Determining the size ILT-U-194 Steel bar, steel U profiles, with taper flanges and carbon steel tubes welded
Chemical Analysis of Steel samples ILT-U-024 ASTM A751
Breaking load test of slings (lifting cranes) ILT-U-1090 Inspection bodies ASME B30.9
Chemical Analysis of Steel ILT-U-1099 Manganese determination ASTM E1086
ASTM E415
Determination of O, N, C, S, H by LECO analysis ILT-U-1139 ASTM E1019
Pullout (Static) and Compression bending (Static) test ILT-U-1232 Pullout Static (Maximum Pullout load); and Compression Bending Static (Stiffens; Maximum Load; Displacement at ultimate load; Yield load; Displacement at yield load; Displacement at 2%; and Elastic displacement) ASTM F1717
ASTM F543
Qualitative XRD examination ILT-U-1235 X-ray diffraction analysis and Crystallographic texture EN 13925-2
Detecting Detrimental Intermetallic Phase ILT-U-1244 Duplex Austenitic/Ferritic Stainless Steels (Method C) ASTM A923
PENT (Pennsylvania Notch Test) test. ILT-U-1263 Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins ASTM F1473
Evaluation of pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking ILT-U-130 Total test pressure: 1 bar Partial pressure: 0.005 bar H2S (5 mbar) with CO2 balance Test duration: 720 hours Test solution: C NACE TM 0284
Microetching Metals and Alloys ILT-U-1317 ASTM E407
Analysis of carbon and sulfur by combustion ILT-U-132 ASTM E1019
Corrosion behavior of stainless steels ILT-U-1593
Metal corrosion testing ILT-U-1662 49 CFR 173.137 and described in UN Manual of Tests & Criteria, Section 37
Zinc coating mass of flat steel determinations ILT-U-1686 Zinc coating mass of flat Steel ASTM A90
Salt Spray determinations ILT-U-1690 Galvanized Steel and Pre-painted Galvanized Steel, samples. (500 hours) ASTM B117
Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (SEM/EDS) ILT-U-1756 Qualitative analysis. ISO 22309
Impact resistance determination ILT-U-1791 Impact resistance ISO 21809-3
ASTM D2794
ASTM G14
Indentation resistance determination ILT-U-1792 Indentation resistance ISO 21809-3
ASTM G17
Cathodic disbondment determination ILT-U-1793 Cathodic disbondment ISO 21809-3
ASTM G8
ASTM G42
Holiday detection test ILT-U-1794 Holiday detection test NACE RP0188
ASTM G62
Resistance to stone impact ILT-U-1805 18 days. Method B ISO 20567-1
Behavior in steam jet ILT-U-1806 18 days. Method A PV 1503
Linear weight determination in corrugated bar ILT-U-1814 Clause 11 ASTM A615
CTOD – Crack tip opening displacement test of Welded samples ILT-U-1829 Welded samples BS 7448-2
ISO 15653
Specific migration of heavy metals in metal article ILT-U-1850 Simulant: Artificial Tap Water, 5 g/L Citric Acid EN 13130-1
Evaluation of Field Metallographic Replicas ILT-U-1867 Prepare specimens (Steel samples AISI 1010) for metallography, includes nital etch; Prepare replicas of specimens prepared for metallography, acetate film; Gold coated; and Digital micrographs of samples (100X magnification) ASTM E1351
Four-point bending test (Static) ILT-U-1868 Four-point bending (Static): Structural Stiffens; Maximum moment; and Yield moment ASTM F2193
Linear-Elastic Plane-Strain Fracture Toughness KIc ILT-U-1891 SENB or CT (Metallic materials specimens) ASTM E399
Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels ILT-U-1905 Method A, B and C ASTM A923
Energy dispersive x-ray microanalysis (EDX) determination ILT-U-1908 Energy dispersive x-ray microanalysis (EDX)
Determining the inclusion or second-phase constituent content ILT-U-1974 Determining the inclusion or second-phase constituent content by automatic image analysis ASTM E1245
Analysis of concentrates of copper, lead and zinc ILT-U-198
Linear-Elastic Plane-Strain Fracture Toughness CTOD ILT-U-1998 SENB or CT (Metallic materials specimens) ASTM E1820
Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials ILT-U-275 Evaluation of coatings exposed to atmospheric corrosion
Density testing on steel ILT-U-287 ASTM B311
ISO 3369
Exposure to Laboratory Light Sources: Accelerated UV Ageing ILT-U-291 Exposure to Laboratory Light Sources: Accelerated UV Ageing (340 nm (UVA) method for 300 hrs) ASTM G154
Preparation and analysis of micro specimen for ferrite count ILT-U-301 Microstructure examination ASTM E3
ASTM E407
Analysis of macroetching metals ILT-U-302 Homogeneity or Not homogeneity of steel bar sample ASTM E340
ASTM E381
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels. ILT-U-324 Practice C & E ASTM A262
Analysis of concentrates of Tin & Lithium ILT-U-360 Tin & Lithium
Analysis of concentrates of Manganese and Tungsten ILT-U-363 Manganese and Tungsten
Chemical Analysis of Steel samples ILT-U-371 B, V, Cu, and Sn ASTM E415
Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials ILT-U-420 Weatherometry, U.V. exposure ASTM G155
Determination of resistance to intergranular corrosion of stainless steels (Method B) ILT-U-473 Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (Method B) EN ISO 3651-2
Gold in rocks determination ILT-U-558 From 8 PPB to 100 PPB and 1 PPM to 400 PPM
Tensile testing on steel ILT-U-620 ASTM A706
Microbeam analysis. Analysis using energy-dispersive spectrometry (SEM/EDS) ILT-U-636 Qualitative analysis. The range of elements we have is from Na to U. ISO 22309
Analysis of concentrates of Iron and Graphite ILT-U-643 Iron and Graphite
Surface area for metal powders (BET) ILT-U-784 BET – 5 – Point analysis (Nitrogen Gas) ASTM B922
Analysis of concentrates of Uranium ore ILT-U-859 Uranium ore
(ESP) Paints and varnishes determination (ESP) ILT-U-2024 (ESP) Film thickness (ESP) ISO 2178
(ESP) Paints and varnishes determinations (ESP) ILT-U-2025 (ESP) Coating Thickness Amplitude Sensitive Eddy Current (Eddy Current) Method (ESP) ISO 2360
(ESP) Measurement of coating thickness. (ESP) ILT-U-2067 (ESP) Measurement of coating thickness. X-ray spectrometric methods (ESP) ISO 3497
(ESP) Materials and articles in contact with foodstuffs (ESP) ILT-U-2068 (ESP) Dip Test for coated surface 8hrs (ESP) ISO 8442-2
(ESP) Materials and articles in contact with foodstuffs (ESP) ILT-U-2069 (ESP) Dip Test for Ferritic & Austenitic stainless steel 6hrs (ESP) ISO 8442-2
(ESP) Materials and articles in contact with foodstuffs (ESP) ILT-U-2075 (ESP) Dip Test for Martensitic stainless steel 6hrs (ESP) ISO 8442-2
(ESP) Mechanical properties of fasteners (ESP) ILT-U-2076 (ESP) Torsional test and minimum torque test (ESP) ISO 898-7
(ESP) Mechanical properties of fasteners made of carbon steel and alloy steel (ESP) ILT-U-2080 (ESP) Proof load test (ESP) ISO 898-2
(ESP) Metal determinations (ESP) ILT-U-2089 (ESP) chemical analysis in stainless steel sample by OES ASTM E1086
ASTM E1019
(ESP) Measurement of coating thickness (ESP) ILT-U-2102 (ESP) Coating thickness in metallic (Microscopical method) ASTM B487
(ESP) Jominy qualification test (ESP) ILT-U-2114 (ESP) Jominy qualification (ESP) ISO 642
(ESP) ASTM A255
(ESP) Failure determination by macrographic analysis (ESP) ILT-U-2115 (ESP) Folds, fissures, pores, occlusions, exfoliations or any other defect (ESP) Nch 1514
Request