ILT Interlaboratory Test | Proveedor de ensayos de aptitud por comparación

Settings / calibrations
Proficiency customized Date Code Comments Standard Cost Select
Hardness Rockwell HRC December 2015 ILT-M-02 (For test and calibration laboratories) ASTM E18 or ISO 6508. ASTM E18
ISO 6508
Hardness Vickers testing December 2015 ILT-M-03 ASTM E 92 and ISO 6507. ASTM E92
ISO 6507
Determination of hydraulic pressure (0 to 500 bar) When you need ILT-U-003
Hardness Rockwell HRC (For test and calibration laboratories). 2014/2015 ILT-U-010 ASTM E18 and ISO 6508 ASTM E18
ISO 6508
Hardness BRINELL (For test and calibration laboratories), Hardness Brinell HB 10/3000 When you need ILT-U-014 (ESP) ASTM E10 and ISO 6506 ASTM E10
ISO 6506
Tapes and/ or tape measure. When you need ILT-U-019 NOM 046-SCFI NOM 046-SCFI
Tapes and or tape measure 2013 ILT-U-019 NOM 046-SCFI NOM 046-SCFI
Hydraulic jack (Bottle type) When you need ILT-U-020 NOM 114-SCFI NOM 114-SCFI
Micrometers determinations 0-25mm When you need ILT-U-042 0 - 25 mm Consult
Hardness Shore measurements 2014/2015 ILT-U-056 ISO 868 (shore A and D) and ISO 6508-1 (shore C) ISO 868
ISO 6508
Volume Automatic Pipettes 2014/2015 ILT-U-070 Gravimetric method Gravimetric
Hardness Rockwell HRB 2014/2015 ILT-U-096 ASTM E18 ASTM E18
Viscosity 2014/2015 ILT-U-108 ASTM D445 ASTM D445
Hardness Brinell HRB – HB 2.5/187.5 2014/2015 ILT-U-174 ASTM E10 and ISO 6506 ASTM E10
ISO 6506
Hardness Brinell HRB – HB 2.5/62.5 2013 ILT-U-175 ASTM E10 and ISO 6506 ASTM E10
ISO 6506
Hardness Brinell HRB – HB 2.5/62.5 2014/2015 ILT-U-175 ASTM E10 and ISO 6506 ASTM E10
ISO 6506
Hardness Rockwell HRA 2014/2015 ILT-U-176 ISO 6508 ISO 6508
Hardness Vickers HV30 2013 ILT-U-177 ISO 6507 ISO 6507
Determination of hydraulic pressure (0 to 150 bar) When you need ILT-U-259
Hardness Vickers HV 0,2 and HV 1 2014/2015 ILT-U-286 ASTM E384 ASTM E384
Hardness Knoop When you need ILT-U-308 ASTM E384 ASTM E384
Determination of Brookfield Viscosity and hardness shore A 2014/2015 ILT-U-359 Hardness Shore A ISO 7619 and Viscosity ISO 2555 ISO 7619
ISO 2555
Load cell calibration 2014/2015 ILT-U-406 ISO 376 ISO 376
Measurement time 2014 ILT-U-418 Digital chronometer Consult
Hardness Vickers HV10 2014/2015 ILT-U-527 ISO 6507-3 ISO 6507-3
Hardness Vickers HV 0,5 2014/2015 ILT-U-558 HV0.5 (180 < HV < 480) ISO 6507
ASTM E384
Brinell Hardness HBW 1/30 2014/2015 ILT-U-574 ASTM E10, BS EN ISO 6506 ASTM E10
ISO 6506
Brinell Hardness HBW 2,5/187,5 When you need ILT-U-630 ASTM E10
ISO 6506
Hardness Rockwell HR 15N When you need ILT-U-657 ASTM E18
ISO 6508
Micrometers determinations 0-500 mm When you need ILT-U-675 0 - 500 mm (0.001)
Hardness Shore A When you need ILT-U-688 Shore A ISO 868
Leeb Hardness determination When you need ILT-U-693 ASTM A956 ASTM A956
Calibration of pH meter When you need ILT-U-847 pH=4, pH=7, and pH=10
Brinell Hardness HBW HBW 10/500 When you need ILT-U-1034 Aluminum block ASTM E10
Calibration of Sphygmomanometers When you need ILT-U-1042 Manual and Digital Sphygmomanometers
Instruments calibration – peachimeter and conductimeter When you need ILT-U-1058 peachimeter and conductimeter
Instruments calibration When you need ILT-U-1062 Manometer (200 bar); Thermometer (250 °C); and Weight (M1 1.0 kg)
Shore A hardness determination When you need ILT-U-1105 range between 30 and 100 HA) tolerance +/-2HA.
Hardness Vickers HV 0.1 When you need ILT-U-1113
Hardness Vickers HV 3 When you need ILT-U-1114
Hardness Vickers HV 0.3 When you need ILT-U-1115
Hardness Vickers HV 0.2 When you need ILT-U-1145 ASTM E384
Decibelmeter calibration When you need ILT-U-1308 Frequency weighting (IEC 60651: 2000 Clause 6.1); Attenuation in and out of the passing bands (IEC 61260: 1995 Clauses 4.4 and 5.3); and Linearity range (IEC 60804: 2000 Clause 9.3.3)
Instruments calibration – conductimeter When you need ILT-U-1336
Timers calibration When you need ILT-U-1431 Comparison against a frequency counter and a 10MHZ reference. Range: 24 hs.
calibrations in manometer, pressure gauge, multimeter, and weight. When you need ILT-U-1472 calibrations in manometer of 0-700 bar pressure gauge, 5 ½ multimeter and M1 weight.
Digital Thermometer Calibration When you need ILT-U-700
Determining masses with reference weights 2014 ILT-U-007 0.01 Kg to 0.05 Kg. M1 Class Consult
Volume Automatic Pipettes 2013 ILT-U-070 Gravimetric method Consult
Measurement of pattern thermometer 2013 ILT-U-072 Consult
Determining masses with reference weights (E2 class) 2013 ILT-U-076 Consult
Calibration of pH meter 2013 ILT-U-077 Consult
Measurement of Shore D hardness 2013 ILT-U-078 Consult
Determining masses with reference weights 2014 ILT-U-08 1kg to 20 kg. M1 class Consult
Angle measurement in goniometers 2013 ILT-U-131 Consult
Determination of pneumatic pressure 2013 ILT-U-184 Consult
Determination of temperature in thermocouples. 2013 ILT-U-207 Range -80 ° c to 300 ° c Consult
Determination of time in Chronometer watch 2013 ILT-U-208 Consult
Determination of temperature in thermostatic baths. 2013 ILT-U-209 Consult
Determination of volume in micro pipette 2013 ILT-U-210 Consult
Determination of pneumatic pressure 2013 ILT-U-211 Consult
Determination of continuous current 2013 ILT-U-212 Consult
Determination of alternate current 2013 ILT-U-213 Consult
Determination of AC voltage 2013 ILT-U-214 Consult
Determination of continuous voltage 2013 ILT-U-215 Consult
Determination of temperature in digital thermometers 2013 ILT-U-216 Consult
Determination of temperature in liquid thermometers 2013 ILT-U-217 Consult
Determination of relative humidity 2013 ILT-U-218 Consult
caliper gauge 2014 ILT-U-377 Consult
Watch buyer centesimal 2014 ILT-U-378 Consult
Request